BrainModular

Script challenge of the day:master/slave encoder

2012-02-05T21:16:20+02:00

thanks 23fx, your's is cool too , will use it for sure !

I've a midi version on the way , thanks r.erorr for the inspiration: Download

Hi, Nay... intresting! there is multiple playback on overdub mode.

Statistics: Posted by r.erorr — 05 Feb 2012, 20:16

Script challenge of the day:master/slave encoder

2012-02-05T20:47:49+02:00

ive looked at your wksp r.error, nic (think it could be optimized, not sure i understand the unpack array, you could drive directly the cell nb to be reced no? but well if it works ) l added few modules that makes visual feedback normally:
mx visual feedback

edit: here is an i feel better/optimized version, just 1mx instead of 2 and no unpack but directly rec cell nb.
mx optimized fb

Hi, 32Fx32
1. I can't get rid of this [-1] witch is between calls. therefore i used Unpack Array. but now I see your solution, thanks!
2. Thanks fore your version of visual feedback. But just one question, why the Matrix is so CPU hungry?
I tried to make visual feedback through color input, but the same result - up 32% CPU only for one matrix... hmmmm? And I noticed that CPU rises depending on speed[Of course I can use reasonable speed, but its tricky anyway].
Then I tried to synchronize Matrix with XY panel movements for visualisation using colums and row out, and CPU is ok, but then I can't use Nay sugestion - Piano roll as recorder, witch is more correct and effective here, than XY pad recorder
3. Thaks for helping!

Statistics: Posted by r.erorr — 05 Feb 2012, 19:47

Script challenge of the day:master/slave encoder

2012-02-04T22:22:46+02:00

thanks 23fx, your's is cool too , will use it for sure !

I've a midi version on the way , thanks r.erorr for the inspiration: Download

Statistics: Posted by nay-seven — 04 Feb 2012, 21:22

Script challenge of the day:master/slave encoder

2012-02-04T21:54:33+02:00

hey ive just looked at your patch nay, it's cool idea for the patern stuff well done!

Statistics: Posted by 23fx23 — 04 Feb 2012, 20:54

Script challenge of the day:master/slave encoder

2012-02-04T20:49:32+02:00

ive looked at your wksp r.error, nic (think it could be optimized, not sure i understand the unpack array, you could drive directly the cell nb to be reced no? but well if it works ) l added few modules that makes visual feedback normally:
mx visual feedback

edit: here is an i feel better/optimized version, just 1mx instead of 2 and no unpack but directly rec cell nb.
mx optimized fb

Statistics: Posted by 23fx23 — 04 Feb 2012, 19:49

Script challenge of the day:master/slave encoder

2012-02-02T22:36:26+02:00

whooo, looks very headaching collaborative work...

I'm sure this patch could have solve previous patching problems, but don't remember really where :rolleyes:

Congrats to the team !

Statistics: Posted by GDLive — 02 Feb 2012, 21:36

Script challenge of the day:master/slave encoder

2012-01-31T18:58:54+02:00

glad you find it useful,
here a quick test, with pattern choice ( as we use the piano roll..) and a little of swing and random
( you can also use the pitch inlet to add random too, many ways, as always with Usine )
Download

Statistics: Posted by nay-seven — 31 Jan 2012, 17:58

Script challenge of the day:master/slave encoder

2012-01-31T17:58:46+02:00

r.error : I've test a different method, far to be perfect , but can be a start..?
Download

Hey, Nay... I made some corrections, and now it looks very good. I would newer tough about using MIDI, but it somehow works. Just one question about synchro playback. Now it is that every loop is identical, but I would like to have as it was originally in my patch -bit of random. I think that tempo is separate from trajectory loop, therefore every loop little different, and sound like endless rhythm.

http://www.sensomusic.com/forums/upload ... t_edit.pat

Statistics: Posted by r.erorr — 31 Jan 2012, 16:58

Script challenge of the day:master/slave encoder

2012-01-31T16:41:40+02:00

Thanks Nay, for helping... first I will tray to understand your version, and replay later

Statistics: Posted by r.erorr — 31 Jan 2012, 15:41

Script challenge of the day:master/slave encoder

2012-01-31T16:20:38+02:00

r.error : I've test a different method, far to be perfect , but can be a start..?
Download

Statistics: Posted by nay-seven — 31 Jan 2012, 15:20

Script challenge of the day:master/slave encoder

2012-01-31T15:07:42+02:00

yup, i will check the wsp an tell ya

Statistics: Posted by 23fx23 — 31 Jan 2012, 14:07

Script challenge of the day:master/slave encoder

2012-01-31T14:42:41+02:00

Of course, I don't want to waste your time with scripting, because I mainly solve matrix recording [at least in this case], but without visual feedback. maybe there simple way to display feedback on another matrix? I you could look and say that its really not possible without scripting, I will stop my experiments
http://www.sensomusic.com/forums/upload ... ctorty.wkp

Statistics: Posted by r.erorr — 31 Jan 2012, 13:42

Script challenge of the day:master/slave encoder

2012-01-31T03:18:01+02:00

you pick up back oldies lol,

if you speak about the data recorder, the final version is somewhere in addon, but i had gone too complex with too much stuff, i should have redone a simpler version, but i never found the time to do so... i don't remember sequencer was needed, do you mean master play? not sure i understand what you mean by sequencer ..
2) no sadly it was able to store/replay several but only singles values. to replay matrix would need an array version, wich would be much more cpu intensive and a bit more complex to patch. one trik is sampler can record array (audio is array of buffer size), so if matrix got inferior size you can re-size the array to buffer size and rec/replay with a sampler. i will try to think about an array version, but im really affraid i won't have time so i can't promise. there are so much patch in progress i don't find time to finish too much work

Statistics: Posted by 23fx23 — 31 Jan 2012, 02:18

Script challenge of the day:master/slave encoder

2012-01-30T23:23:52+02:00

Hi... Amazing tool !
1. does it work only when sequencer is turned on?
2. Can I record Matrix behavior with this data recorder?

Statistics: Posted by r.erorr — 30 Jan 2012, 22:23

Script challenge of the day:master/slave encoder

2011-03-17T15:51:19+02:00

Hi, i ,am very impress and your future addon will be a master piece !!
I am sure that it should be a hard job ...

Tank you very much for your help. Usine will be definitively the best music live tool if we can record automation on the fly during a performence !

Statistics: Posted by cmodica — 17 Mar 2011, 14:51

Script challenge of the day:master/slave encoder

2011-03-15T23:30:24+02:00

Hi cmodia, in fact i worked very hard since last version on a new much powerful and clean/easy version that should be soon a futur addon. i just fail a last tricky part where i dlike my script to auto-detect the user has changed param 1 and 4 for exemple, to
rec only those param and keep the other automations playing, being unafected.. a bit more tricky than i thought to be compatible
with midi remote without bothering engaging independant swichs first, but im pretty sure it can work. im neaaahh

for now it can rec up to 16 datas, each are synced only , but each can have an independant lenght from 1/8 to 32 bars,
I will try to find a way to deal with a non-synced 'loop' option.

Statistics: Posted by 23fx23 — 15 Mar 2011, 22:30

Script challenge of the day:master/slave encoder

2011-03-15T21:10:28+02:00

I will test it as soon as possible. It seems to be very interesting for recording automation in Usine.

Is it possible to record some parameters without synchronisation ?
For exemple record parameter changes during ''x sec'' and when i stop recorded play the same ''x sec'' automation in loop mode ?

Statistics: Posted by cmodica — 15 Mar 2011, 20:10

Script challenge of the day:master/slave encoder

2011-03-05T20:56:02+02:00

nice. cool ex. yup you are right.

yesterday i fighted and implemented the shift/scale/roll function of my vst automations addon, but i would need, and also to get a correct vizualization range, to pick also min/max values of wanted modules, studing the best ways not too boring for user...

Statistics: Posted by 23fx23 — 05 Mar 2011, 19:56

Script challenge of the day:master/slave encoder

2011-03-05T20:38:38+02:00

Just a thought : maybe a more concrete example could be cool..?
here a little one ( use the 5.50.45, cause .47 has a little bug with the grain sampler )

Download

Statistics: Posted by nay-seven — 05 Mar 2011, 19:38

Script challenge of the day:master/slave encoder

2011-03-05T01:37:44+02:00

great !
gone to test this baby tomorrow !
and yes it's could be a good addon

Statistics: Posted by nay-seven — 05 Mar 2011, 00:37

Script challenge of the day:master/slave encoder

2011-03-04T22:04:57+02:00

@ nay, im a bit ot now,

but if you want there is a more sexy data recorder to test with various enhancement and fixed bugz, ( fixed ranges and other)
now the recordings are saved with the workspace and recallable via the preset manager.
Also added a sync system and display and changed the sampling rate frequency to more musical uses,
precision is now in nb of steps per bar. 32 or 64 default give great resuls. same circular buffer recording type as my previous addons. dlike some reviews before posting as add-on maybe if worth ?

rec_anything_A5

Statistics: Posted by 23fx23 — 04 Mar 2011, 21:04

Script challenge of the day:master/slave encoder

2011-03-04T11:57:40+02:00

thx guys, btw that wasn't the original idea (more storing/recall midi mess, but bsork should make a better job for this )

@ nay, i don't really know the limit, depends on precision and nb of datas, CPU and ram. but i think it can handle a descent amount of time.

for exemple by default it sample 8 datas each 32 blocs (at prec of 32). So the arrays size increment of 8 each 100ms (roughly for a 128 buffer). I wouldn't try to go with memory array of >16000 size, wich make roughly (16000/8= 2000 cycles of 100ms or 200 seconds, about 3mn by default). to know the data lenght you can see it on the fader when recording, (have to multiply by N datas). It could handle more but CPu/ram could suffer, best is to try and find the bad limit...
precision means it will sample the x datas each n blocs. a too low gap beetween each sampling could lead to very big arrays very quickly, try to remain a 16 or 32, unless you record very fast changes or need hi precision, then can go to 8 or less,
but proportionally should reduce the recording time as well. i will try to instestigate and convert this as a more secured addon with adapted limited recording time if got time a bit later..

for the Store array it should work if i use the new option senso imlemented a while back about storing arrays in scripts; i will have a look. then the preset manager could be also able to store/recall different recs.im on it

this just triged me an idea:
a variance could be to use it as a 'manual snaphots manager'. it would have the benefit of being able to store/recall huge amount of presets for various items located anywhere at different places in the workspace, without heving to copy them in same subpatch first, and act as kind of a 'SubPreset' Manager, the normal preset manager could tehorically recall ie 16 sets or memory arrays of 512 'subpresets'.
i also suspect it could react faster than ie conductor or PM in certain cases as it will apply the value in a bloc accurate way,
for such automations or sequenced applications. the cherry on the cake would be an utility to smooth morph between sets.
kind of manual 'sub conductor'. dk if im clear lol

Statistics: Posted by 23fx23 — 04 Mar 2011, 10:57

Script challenge of the day:master/slave encoder

2011-03-04T01:17:30+02:00

@nay If you want to store the record with the patch, you can simply use a "store array" (or several? ) script in the array folder of usine. I haven't the time to deeply look at the 23fx23's patch however, so you have to find where to store the value !

@23fx23 You have a lot of good ideas ! Excellent !

Statistics: Posted by moody33 — 04 Mar 2011, 00:17

Script challenge of the day:master/slave encoder

2011-03-04T00:44:47+02:00

Great ! that's a cool example 23fx !
could be really useful !,
btw, when you say " don't rec too long " what will be the correct limit for you...?
and an other question : is there a way to store the record with the patch ..?

Statistics: Posted by nay-seven — 03 Mar 2011, 23:44

Script challenge of the day:master/slave encoder

2011-03-04T00:19:10+02:00

@ nay, i didn't found yet personally a good use of the sort function (im sure there are), but extended on the queue n data ideas ive made this little patch called "anything recorder".

like it's name describes it can record a set of datas coming from any items with various ranges, ie fader, xy, lisboxes ect from the patch and replay/recall the datas quite easily by using busses. here can rec 8 datas and can be extended to 16, or more with a bit of wiring.

http://sensomusic.com/forums/uploads.ph ... HING_A.pat

Statistics: Posted by 23fx23 — 03 Mar 2011, 23:19

Script challenge of the day:master/slave encoder

2012-02-05T21:16:20+02:00

thanks 23fx, your's is cool too , will use it for sure !

I've a midi version on the way , thanks r.erorr for the inspiration: Download

Hi, Nay... intresting! there is multiple playback on overdub mode.

Statistics: Posted by r.erorr — 05 Feb 2012, 20:16

Script challenge of the day:master/slave encoder

2012-02-05T20:47:49+02:00

ive looked at your wksp r.error, nic (think it could be optimized, not sure i understand the unpack array, you could drive directly the cell nb to be reced no? but well if it works ) l added few modules that makes visual feedback normally:
mx visual feedback

edit: here is an i feel better/optimized version, just 1mx instead of 2 and no unpack but directly rec cell nb.
mx optimized fb

Statistics: Posted by r.erorr — 05 Feb 2012, 19:47

Script challenge of the day:master/slave encoder

2012-02-04T22:22:46+02:00

thanks 23fx, your's is cool too , will use it for sure !

I've a midi version on the way , thanks r.erorr for the inspiration: Download

Statistics: Posted by nay-seven — 04 Feb 2012, 21:22

Script challenge of the day:master/slave encoder

2012-02-04T21:54:33+02:00

hey ive just looked at your patch nay, it's cool idea for the patern stuff well done!

Statistics: Posted by 23fx23 — 04 Feb 2012, 20:54

Script challenge of the day:master/slave encoder

2012-02-04T20:49:32+02:00

Statistics: Posted by 23fx23 — 04 Feb 2012, 19:49

Script challenge of the day:master/slave encoder

2012-02-02T22:36:26+02:00

whooo, looks very headaching collaborative work...

I'm sure this patch could have solve previous patching problems, but don't remember really where :rolleyes:

Congrats to the team !

Statistics: Posted by GDLive — 02 Feb 2012, 21:36

Script challenge of the day:master/slave encoder

2012-01-31T18:58:54+02:00

Statistics: Posted by nay-seven — 31 Jan 2012, 17:58

Script challenge of the day:master/slave encoder

2012-01-31T17:58:46+02:00

r.error : I've test a different method, far to be perfect , but can be a start..?
Download

Statistics: Posted by r.erorr — 31 Jan 2012, 16:58

Script challenge of the day:master/slave encoder

2012-01-31T16:41:40+02:00

Thanks Nay, for helping... first I will tray to understand your version, and replay later

Statistics: Posted by r.erorr — 31 Jan 2012, 15:41

Script challenge of the day:master/slave encoder

2012-01-31T16:20:38+02:00

r.error : I've test a different method, far to be perfect , but can be a start..?
Download

Statistics: Posted by nay-seven — 31 Jan 2012, 15:20

Script challenge of the day:master/slave encoder

2012-01-31T15:07:42+02:00

yup, i will check the wsp an tell ya

Statistics: Posted by 23fx23 — 31 Jan 2012, 14:07

Script challenge of the day:master/slave encoder

2012-01-31T14:42:41+02:00

Statistics: Posted by r.erorr — 31 Jan 2012, 13:42

Script challenge of the day:master/slave encoder

2012-01-31T03:18:01+02:00

Statistics: Posted by 23fx23 — 31 Jan 2012, 02:18

Script challenge of the day:master/slave encoder

2012-01-30T23:23:52+02:00

Hi... Amazing tool !
1. does it work only when sequencer is turned on?
2. Can I record Matrix behavior with this data recorder?

Statistics: Posted by r.erorr — 30 Jan 2012, 22:23

Script challenge of the day:master/slave encoder

2011-03-17T15:51:19+02:00

Statistics: Posted by cmodica — 17 Mar 2011, 14:51

Script challenge of the day:master/slave encoder

2011-03-15T23:30:24+02:00

Statistics: Posted by 23fx23 — 15 Mar 2011, 22:30

Script challenge of the day:master/slave encoder

2011-03-15T21:10:28+02:00

Statistics: Posted by cmodica — 15 Mar 2011, 20:10

Script challenge of the day:master/slave encoder

2011-03-05T20:56:02+02:00

Statistics: Posted by 23fx23 — 05 Mar 2011, 19:56

Script challenge of the day:master/slave encoder

2011-03-05T20:38:38+02:00

Just a thought : maybe a more concrete example could be cool..?
here a little one ( use the 5.50.45, cause .47 has a little bug with the grain sampler )

Download

Statistics: Posted by nay-seven — 05 Mar 2011, 19:38

Script challenge of the day:master/slave encoder

2011-03-05T01:37:44+02:00

great !
gone to test this baby tomorrow !
and yes it's could be a good addon

Statistics: Posted by nay-seven — 05 Mar 2011, 00:37

Script challenge of the day:master/slave encoder

2011-03-04T22:04:57+02:00

Statistics: Posted by 23fx23 — 04 Mar 2011, 21:04

Script challenge of the day:master/slave encoder

2011-03-04T11:57:40+02:00

Statistics: Posted by 23fx23 — 04 Mar 2011, 10:57

Script challenge of the day:master/slave encoder

2011-03-04T01:17:30+02:00

Statistics: Posted by moody33 — 04 Mar 2011, 00:17

Script challenge of the day:master/slave encoder

2011-03-04T00:44:47+02:00

Statistics: Posted by nay-seven — 03 Mar 2011, 23:44

Script challenge of the day:master/slave encoder

2011-03-04T00:19:10+02:00

Statistics: Posted by 23fx23 — 03 Mar 2011, 23:19