Yes, hardware routing between applications is ideal in many scenarios. The RME DSP Mixer is also usefull in this regard (Mutiface II + D/A A/D ADAT interface) , however, either I have yet to learn how to use it properly or I am limited for inter-application routing as I am using most of my I/o for hardware interfacing. Will have to find a chance to have a more in depth look at this.I just used Usine, Ableton Live and Reaper together on the same machine with an SSL MX4 MADI audiocard (the driver is multiclient).
You wrote this a long time ago, but I have questions about RME, the routing in order to connect Usine and Ableton Live.
Until now, I used Output Adat 5-6 from Usine to enter in Ableton, and Output Adat 3-4 from Ableton to enter in Usine.
It' was ok. The problem was just that I wanted an Output more from Usine to Ableton, and with Adat 7-8 or Adat Spdif 1-2, nothing happened. Would you know why? and how to do?
The other problem today is that now the RME doesn't communicate anymore by Adat. I should replace this way by the analogic I/O (which are not always free). Would you know this problem and how to do?
Thank you so much
Gwennaelle
Statistics: Posted by gwennaelle — 26 Feb 2016, 12:50
]]>
Thank you
Gw.
Statistics: Posted by gwennaelle — 18 Feb 2015, 15:05
]]>
It would be great if I could have the audio talk with other apps e.g. Sooperlooper & Ableton,
but unfortunately Usine doesn't work with JackOSX.
This is about the only A/V-soft I encountered that doesn't work with Jack.
Is this on a to do list? or can I do something to get it on a 'fixlist'?
Johan
MacOS10.6.8 & 10.9.5
Statistics: Posted by donkeyharejoe — 07 Feb 2015, 16:06
]]>
As far as I know from the beta, it hasn't got any rewire implemented yet, but to be honest I would not need to use rewire at the moment. My previous post will explain all about syncing Ableton and Usine Hollyhock. What I forgot to mention is that with Ableton as the master it also send the transport control by midi and Usine will start and stop as soon as you start or stop Ableton.
Statistics: Posted by mikebosch — 22 Jan 2015, 16:40
]]>
I tried using reastream however had complications using. I was using multiple computers, and different DAW which clocked but just drifted over time.
Giv Sync Master - from Moon Safari in the addons section had a great patch that actually helped me get on track better with Sync issues.
It has a variable BPM calculation that shifts back and forth centered around the incoming clock, but does not drift over time.
I did modify his script with an alignment "fudge-factor". This helps keep the latency between the two applications dead-on.
It works very well, and I use an input and scope to align the other audio source up to find the offset between the two.
Once aligned it's almost a dead-on calibration and seems to stay really close.
Hopefully in awhile Ill upload my modification to the add-ons to share, but at the moment I need to make some tweaks.
-S
Statistics: Posted by sephult — 19 Jan 2015, 22:16
]]>
you can load an instance of reastream in each software and you can send and receive midi and multiaudio.
the 2 softwares don't need to be on the same computer either, you can stream on a network easy !
search no more or nowhere else : it is free and "solid"
32 and 64 bit
http://www.reaper.fm/reaplugs/
Statistics: Posted by oli_lab — 19 Jan 2015, 19:06
]]>
]]>
http://www.sensomusic.com/wiki2/doku.ph ... pplication
I set usine to receive the midi clock from Ableton and I was amazed of how solid the sync was. I made a comparison with Audiomulch (which I also bought a while ago) and where Audiomulch was constantly struggling to follow Ableton's clock, Usine was spot on and took only a second to get back ion sync with the clock from Ableton.
The sync was actually perfect. Today I will do some more tests with several plugins, instruments, etc. loaded up and see how this goes.
Oh by the way I did this on a Macbook Pro late 2012 with 16gb ram and 500gb HD. Also I didn't use the IAC bus, but ipMIDI, which can be downloaded for free (just google it).
Mike Bosch
Statistics: Posted by mikebosch — 13 Jan 2015, 17:52
]]>
Statistics: Posted by nay-seven — 22 Nov 2014, 11:14
]]>
yes, you're right but it's maybe on the road map...
HelloI'd like to put Usine in rewire i, Ableton Live.
Is it now possible?
How?
Thank you.
Gw.
Statistics: Posted by gwennaelle — 12 Nov 2014, 14:15
]]>
+1 for RME TotalMix.
+2Also creamware (soniccore) soundcards, even more intuitive with the visual modular interface.
I have to scratch my head for 5 minutes before setting up software rerouting with the RME.
Much more favourable using these solutions to high latency software "cables" which are shite for live situations.
Statistics: Posted by creepjoint — 30 Aug 2014, 12:57
]]>
http://vb-audio.pagesperso-orange.fr/Cable/index.htm
http://vb-audio.pagesperso-orange.fr/Vo ... /index.htm
and other apps dealing with virtual audio..donationware, made in france
Statistics: Posted by iococoi — 26 Aug 2014, 16:41
]]>
Statistics: Posted by gurulogic — 31 Jul 2014, 11:11
]]>
]]>
]]>
The grid is an awesome sequencing solution which I have yet to really dive into....
Not sure why I left rack exploration until now. Considering its the about the first thing touched upon in the documentation. It's genius. It's makes more sense than the linear way. Thank you Senso.I wonder how deep one could dive?
Statistics: Posted by Blaakk — 23 May 2014, 15:10
]]>
I just used Usine, Ableton Live and Reaper together on the same machine with an SSL MX4 MADI audiocard (the driver is multiclient).
Yes, hardware routing between applications is ideal in many scenarios. The RME DSP Mixer is also usefull in this regard (Mutiface II + D/A A/D ADAT interface) , however, either I have yet to learn how to use it properly or I am limited for inter-application routing as I am using most of my I/o for hardware interfacing. Will have to find a chance to have a more in depth look at this.Statistics: Posted by gurulogic — 11 Feb 2014, 08:49
]]>
I used Reaper at the same time to make a 24 multitrack recording.
I used this kit for two weeks in rehearsal and then in shows without any problems or glitches whatsoever.
I was damned impressed by SSL MX4 and the modular software mixer that comes with it and allow almost any routing imaginable.
I can give more info on my software and hardware setup if you're interested!
A little link to the project page (audio is coming soon) :
http://cemproduction.com/productions/femme-aimee
Statistics: Posted by gthibert — 11 Feb 2014, 02:33
]]>
Once again a night where Usine teaches me a new thing or two.
Statistics: Posted by ceasless — 10 Feb 2014, 21:21
]]>
]]>
Thank you for enumerating these recording options. I hadn't thought to look to VST solutions.
I've been thinking about it and the reason it felt more 'natural' to be recording into tracks in S1 is that a Usine workspace can become a galaxy of instruments, and I'm used to recording instruments in a linear DAW. The grid is an awesome sequencing solution which I have yet to really dive into, but I'd still like to have it all bounced down into a linear project for mixing and further exploration.
Regarding ReWire support in Usine, will we be able to create new ReWire inputs/outputs on the fly for streaming to/from a separate sequencer?
Statistics: Posted by ceasless — 09 Feb 2014, 16:47
]]>
Edit: Also just noticed, as a VST in Usine, Plogue Bidule's audio recorder might be a decent option for multitrack "no fuss" capture. Will investigate further. Hadn't explored Bidule in some time.. Still running a 2011 build, lol.
Statistics: Posted by gurulogic — 08 Feb 2014, 21:17
]]>
Even so it is a nice solution, I didn't want to make a big announcement about it though as it gets around one of the limitations of the free version.
That said it just felt nicer and more comprehensive than Usine's current bounce to disk functionality. I'm going to try it with the new Tracktion very soon now.
Statistics: Posted by ceasless — 03 Feb 2014, 12:42
]]>
Windows it't the gate to hell
@sephult
Yes I could do that, sure. But I would like to see it e.g. in the device indicator. So if "sync" is an integrated function of a device in the new Holyhock version, it would be nice, Usine shows a "'I'm working on sync indicator" This can't be managed by a patch. Cause only Usine "itself" has knowledge about it's internal states. Only a nice to have and helpful to detect problems on stage 2 minutes before the show
Statistics: Posted by hesspet — 02 Feb 2014, 19:11
]]>
Statistics: Posted by grainular — 02 Feb 2014, 18:10
]]>