Even one thing to solve. Depending on the model of the original in stereo, I tried to create a control volume for 8in, 8out, but I didn't understand how (where) to use it (the volume) (is it the gain?). And I could'nt reproduce the patch, because I didn't find the "audio thru" fader (the copy/past doesn't match). Would you know?
Thanks.
Gw
Statistics: Posted by gwennaelle — 18 Apr 2015, 13:12
]]>
It seems your image is not loading at the moment.
I will try to see if I can find it later.
As Oli said, you need to have your audio device enabled for the outputs, and modify the Device panel - Device you are using for output as well.
As a default only Audio 1 and Audio 2 are wired, you will have to wire an output Device, so that these also go to the rest of your audio ports.
You have the choice to wire your patches through multichannel, or you can just use a Stereo pair through your patches and split in the output device to all your channels.
-S
Statistics: Posted by sephult — 14 Apr 2015, 18:01
]]>
you need also an audio device (with 8 inputs) in the bottom part of each rack so the 8 audio channels will be transmitted to the 8 outputs of the sound card
Statistics: Posted by oli_lab — 13 Apr 2015, 14:02
]]>
So I did this
But I have sound only in Audio from Usine 1 and Audio from Usine 2, nothing in Audio from Usine 3... to 8.
Would you know what's wrong?
Gw
Statistics: Posted by gwennaelle — 10 Apr 2015, 07:38
]]>
Then open the devices panel, select add input/output for what you need.
Next double-click the new device added in the device panel.
You can just wire the IO for all the inputs and outputs you need.
In your patches you can add additional outputs or modify the device output so all the signals merge if thats what you want.
-S
Statistics: Posted by sephult — 10 Apr 2015, 04:47
]]>
Would you know how to send in all speakers?
Thank you
Gw
Statistics: Posted by gwennaelle — 10 Apr 2015, 02:06
]]>