Welcome to %s forums

Gilsornette

Exactly! Why had I never noticed this "fill -1 if not found" input?:-) That's what I was looking for...
Thank you Olivar!

Gilsornette

Hello, I'm using a 6x6 audio mix matrix in mode faders. Some of my cells/faders are at the minimum (value=0) , and a few have a non 0 value. I'd like to shuffle those values between their respective positions (cells/faders at 0don't move). What could be the simplest way to achieve that? It's easy to...

Gilsornette

Hello,
Super! je pensais que ce n'était que pour les commandes MIDI. Merci pour le conseil!

Gilsornette

Merci Grego, c'est une solution. Je vais passer par là. J'espèrais qu'il y ait peut être un OSC call ou quelque chose comme ça:-)

Gilsornette

Hello,

Encore une question... Est il possible , en utilisant l’OSC feedback (menu remote) que les objet de ma tablette s’ctualisent à l’ouverture d’Usine? Ou faut il dans ce cas utiliser des modules OSC send?
Merci d’avance.

Gilsornette

Effectivement, il faut que je recalibre les valeurs et alors ça fonctionne correctement...
Merci beaucoup!
Bonne soirée.

Gilsornette

...et du coup j'ai une autre question... J'ai activé l'osc feedback sur certains objets (faders entre autres), affecté un nouveau port pour osc feedback, que j'ai reporté en "receive" dans Touch OSC, mais lorsque je manipule un objet dans Usine (fader par ex), l'objet correspondant dans Touch OSC re...

Gilsornette

Hello,

De retour, j'ai pu tout vérifier. En fait le port d'envoi n'était pas le même dans Touch OSC et dans Usine...
Tout fonctionne normalement.
Merci beaucoup pour vos conseils!

Gilsornette

Merci Olivar, Voici déjà quelques réponses - touch OSC doit envoyer sur le même port que celui qui est ouvert dans Usine > oui - touch OSC doit envoyer à cet ordinateur à son adresse IP > oui ou en broadcast (adresse finissant par 255) - l'OSC doit être activé dans Usine > oui - utiliser un OSC list...

Gilsornette

Hello, J'ai créé une interface avec Touch OSC sur une tablette (Android); je visualise l'entrée OSC dans Usine avec les petites barres rouges dans l'en tête principale, mais je ne récupère rien , ni dans un patch (OSC lister par ex), ni en affectation remote OSC. Il me semble avoir déjà été confront...

Gilsornette

Thank you very much Oli! I'll check in the next few days and tell you how it's going for me.

Gilsornette

thank you! I was doing this way

Gilsornette

Thank you for the idea! and the challenge

Gilsornette

@grego : thank you for your patch!

It seems to me that it'd be interesting to have a data dispatch object and a data expand object as they exist for Midi. What do you think about this? Shall I ask for it in suggestions?

Gilsornette

Thank you for checking. I tried once again, with an empty wkp, only this patch loaded: CPU in Usine is around 8-9% , and around 35/40% in Windows (11).
I don't know what to do.

Gilsornette

Thank you very much for the advice! I'll try this.

Gilsornette

Hello,

it's a polyphonic subpatch with 8 grain cloud samplers.
When It's loaded, even if Usine is off (then CPU from Usine is 1%) Windows displays 37% of CPU consumption for Usine.
Here's the patch attached.
Thank you in advance

PS : I also sent a message to Senso .

Gilsornette

Hello, I use a matrix 8x8 and I'd like 1st clicked Cell to be routed to subpatch 1, 2nd Clicked cell to subpatch 2, and so until 8th clicked cell is routed to subpatch 8. I also want that if I release Cell 3 then 6 and that I click on two new cells those one are routed to subpatch 3 and 6 . And I ca...

Gilsornette

Hello,

I have a patch on which I'm working that displays 4% of CPU consumption in Usine but 35% in Windows Task Manager. And I can hear it

(fan is on...).
It seems strange to me. Is it?
Thank you

Gilsornette

Hello,

I am not an expert too.To delete a whole patch in IML you can use "CLEAR_PATCH" with module "Patch send internal Msg". You can add PROMPT_FOR_SAVE if you need to save changes before closing.

Gilsornette

Thank you! These are indeed nice improvements!

Gilsornette

Thank you!!

Gilsornette

Hello,

It works fine with this module. Thank you!

Gilsornette

I've loaded wavetables as wave files but when I change the frequency I've got strange results: non linear response, inconsistent, and not following the frequency curve.
As the recording attached. What am I missing?

Gilsornette

Thank you very much!!

Gilsornette

I tried the example. But I was mistaken about how it works. Thanks for the "inline desk" explanation. Now it's ok for me:-)

Gilsornette

Hello

Thank you for your answers.

can't reproduce the bug on my side. do you use last HH6 version ?

I'm using HH 250506.
Maybe it's because the monitoring function has only to be used to monitor the recording and not the audio input (what I thought it was also dedicated for)?

Gilsornette

Hello,

Where can I find wavetables to use with Oscillator Wavetables? Or what kind of software may I use to create some?
Thank you!

Gilsornette

Hello, Thank you for proposing such module! I've tried it quickly and have noted a few things: - monitoring switches have a strange behaviour while "listening" to the original sample: if you click just one it soloes the corresponding track, but if you select two or more no sound is outcoming - it's ...

Gilsornette

That's what I was afraid of...

I'll ask him.
Thank you anyway

Gilsornette

Hi Olivar, Thank you for your help. But that's not what I need, I guess my explanations were not clear. I'm wondering how to change fixtures parameters channels from a patch, instead of opening the light plot and the corresponding fixture inside . For example, in your workspace the 46HP1 fixture is ...

Gilsornette

Hello, Is there a way to change fixture's dimmer number other than by modifying directly in the light plot? Using IML, script, or a simplier way if exist. I'd like to do a kind of matrix with which I can easily affect a dimmer number to a channel. Equivalent to a "patch électronique" in french light...

Gilsornette

Very good idea!

Gilsornette

Thank you very much!!!

Gilsornette

Thank you very much!

Gilsornette

Hello,

Do someone use the Motion Recognizer module? I can't get more than one movement recorded and the detection seems not to work.
Have you better results?

Gilsornette

C'est super d'avoir réussi à mettre ça en place!

Gilsornette

Hello, Actuellement (je ne sais à quelle version ça remonte) un preset qui est utilisé dans la grille se voit gratifié d' un petit marqueur bleu dans le coin droit (comme quand une télécommande midi est affectée à un objet); du coup il est facile de savoir quels sont les presets inutilisés dans la g...

Gilsornette

Hello, I regularly take notes of things that I would like to see modified or implemented in Usine. Here's my wishing list:-) Please don't hesitate to tell me if ot's not a good idea to post so much demands in one topic... - devices menu displays the device group name - possibility to move the device...

Gilsornette

Hello,

I also usually work with busses but this time I have a lot to try, to search (lots of patches) and I found the "drag and drop binds" solution very useful.
So I'll continue to use "infos bubbles" and submit a suggestion.
Thank you for your help!

Gilsornette

Hello, I'm using sensors and I made an interface patch with all the parameteres (as faders or knobs) that is located in the toolbox. SO I only have to bind (Ctrl+Shift + drag &drop) one of these parameters to the control I want to remote on other patches. As I have a lot of patches with different ki...

Gilsornette

Thank you Olivar. But I think we're not talking exactly about the same thing. I've got a fader A who is binded with another one, fader B (ctrl+shift drag & drop); I'd like that fader A can display the name of the bind control that remoted it. I don't know if it's clear... I supposed that connecting ...

Gilsornette

Precision: the name of binds control...

Gilsornette

Hello,
Is there a way to display the "binding" name of an object? I thought the "binding" output was dedicated for this but it's not the case.
I can fly over with the mouse and have a look to the info but I'd like to get it permanently.
Thank you in advance

Gilsornette

Thank you!!

Gilsornette

ok, tout s'explique alors:-)
Merci!

Gilsornette

Salut,
C'est un essai (création d 'un bus dans le patch 2 du rack 2):
SET_TARGET_PATCH 2 2
CREATE_MODULE TrigOut 284 200 200
Envoi par le module Send Internal Message
Merci d'avance

Gilsornette

Hello, Je voudrais utiliser la commande SET_TARGET_PATCH avec un module Send internal message pour créer un objet dans un patch/rack différent, mais, que ce soit en nommant le patch ou en indiquant son Num Rack, Num Patch, l'objet se crée toujours dans mon patch "de départ". Pour le créer dans le pa...

Gilsornette

Hello,

Thank you all for your advices! very useful for me.
Have a nice day!

Gilsornette

Hello, I have to make a sound "installation" in a small room (~20m²). Teh budget is also tight:-). It will be permanent. I was thinking about using a 5.1 hifi system (or gaming system)(e.g. https://www.logitech.com/fr-fr/products/speakers/z906-surround-sound-system.980-000468.html?utm_source=google&...

Gilsornette

@Brainmodular team: thank you very much for modifying the scroll of the grid! Could it be possible that we have an option to choose on which section the "repositionning" of the cursor is done? In some cases, the last one of the grid is too late for me , I need to know what are the next sections (at ...

Gilsornette

Hello,

Thanks to both of you. I know Global Arrays and I'm already using them in my workspaces. Very useful indeed.
I will think about that again but I'm afraid that , in this particular case, it'd be way too long and comlpicated:-(
Have a nice week end!

Gilsornette

Thank you for your answer Joffo. Global arrays won't be very useful in my case : I want to "duplicate" some patches, part of Usine (e.g. mixers, grid) to be able to go in the audience when my setup is on stage , and check things. For now I use a multi monitor app (space desk) and duplicate my screen...

Gilsornette

Hello,

Is it still possible with HH6 to share patches over the lan? As in this video https://www.youtube.com/watch?v=umwe0JmBixA
Thank you

Gilsornette

Hello Sylvain, I think I was not clear. I was not asking for a scrolling function, I know there is one, but only that the "mode défilement" (what I called grid auto scrolling) has an option that allowes the current section to stay in the middle , not on the right. What you are proposing, if I well u...

Gilsornette

Hello, Could it be possible to have an option "grid auto scrolling" (mode défilement) with the cursor that stays in the middle , instead of going to the right side? In live conditions I'm always obliged to move the grid to the left to be able see the following sections, what is essential for me. I h...

Gilsornette

Yes, good idea! That's a function (export selected) that is missing

Gilsornette

Hi Sylvain,
I found an old one with gyroscope. It works fine. And it's cheap:-)
Thank you

Gilsornette

my phone has no gyroscope...

Gilsornette

Hi Sylvain,
Thanks for the advice, that’s a good idea.
I used touchOSC on my phone for other projects , with faders and switch. I’ll try to access the gyroscope, that’s what I need for now.

Gilsornette

Hello,

Anyone is actually using a wiimote with windows? I can't find a solution and I need a (cheap...) bluetooth controller for my project.

Gilsornette

Thank you Grego. But I cannot use Bluesoleil because it asks for the pincode of the wiimote, and I don’t have it (I bought it second hand). I bypass it using Dolphin , an emulator for wiimote. But anyway I think it won’t solve my problem because Bluesoleil (or Dolphin) only works as a bluetooth driv...

Gilsornette

Hello,

Thank you for your reply. So, I'll wait:-)
Best
Gilles

Gilsornette

... OSCulator is only for Mac, and I'm a Windows 10 user. I'll try to find another software.
If you ever have an idea
Best

Gilsornette

Hi Sylvain,

So, I'll try with OSCulator. Thank you!
Gilles

Gilsornette

Thank tou for the answer Sylvain. I was not using the mouse wheel, but the movement of the mouse itself caused the fader to jump.
I'll try your advices and see...
Best
Gilles

Gilsornette

Hello, I'm trying to use a wiimote with HH6 (last version) but I encountered some problem. The wiimote is well recognized by windows 10 and well connected (Nintendo RVl-CNT 01 connecté) but no datas are received by the wiimote module. And either in the other direction. Any idea of what could be the ...

Gilsornette

Hello,

Could you be more precise about the new "tag" concept? Maybe with an example
Thank you

Gilsornette

Hello, I'm using a touch screen as a second screen for a live session; I have sometimes to use the mouse on the main screen but I recently had some bad experiences (during rehearsals , luckily) when moving a fader with the touch function and then wanting to use the mouse on the other screen: as I mo...

Gilsornette

Bonjour,

C'est une super idée. Je serai bien intéressé mais il faut que j'estime les coûts (depuis Metz...). Je transmets mes dispos par mp également.
Gilles

Gilsornette

Hello Joffo,

Thank you for your help. But it's not so efficient than the Mixeur implemented in Usine; with it you just have to drag and drop your racks and gain faders appear with also
mute , solo, on/off rack. In a very easy way. I just miss a resizable option, as almost all objects have in Usine.

Gilsornette

Hello,

It could be useful if the Mixeur (and so the faders in it) has a resizable option.
And also an option "show only active racks".
Thank you

Gilsornette

Merci beaucoup! Je viens donc de découvrir que les modules avec le petit logo "grille" peuvent être déposés directement dans la grille...
Je me coucherai moins bête ce soir;-)

Gilsornette

Hello,

Une petite question en passant...Comment fait on pour placer un cluster sur la grille? Je ne peux faire de glisser-déposer et je ne sais pas trop
par quel autre moyen c'est possible (je suis sur PC). Merci d'avance.

Gilsornette

Ok, thank you. I'll have to try and check again.

Gilsornette

Hello,

Do someone achieve to run kiosk mode with a mac? If so, what is the configuration you're using?
It works perfectly on pc but I need to use a mac (not a recent one) for an installation and , for now, it doesn't work.
Thank you

Gilsornette

Bonjour,

J'avais le même souci avec la BCF. Il y a une option dans le Setup > Midi > Memoriser nom des devices dans learn. Si tu décoches les assignations ne se font qu'avec les num de canal Midi, , num de controleurs etc, sans le nom de ton interface. C'est une solution.

Gilsornette

ok, I've understood my mistake... If we use "flow to audio rate " module we need to change Master Vu's scale to linear...
and it works well:-)

Gilsornette

Audio VuMeter is expecting an audio signal to its input, that's why it doesn't react correctly.

But I tried to use a "Flow to audio rate" module and it also doesn't work. I thought this module was made for this.
Isn't it its function?

Gilsornette

@oli_lab: thank you for your answer, i'll try this!

Gilsornette

Hello,

Is there a way to use Usine with a bluetooth speaker (need it for an installation)?
Thank you

Gilsornette

Hello,

It was right in front of me:-)... Thank you very much

Gilsornette

Hello,

I can't find how to group fixtures, as in Light demo Wkp. Is there a module "Group" or a way to select several fixtures and group them?
Thank you

Gilsornette

Hello,

Also it'be very convenient to save / load a list of presets.
Thank you

Gilsornette

Hello,

It could be fine to have the ability to change/modify parameters of grid sections. E.g.change loop mode from loop to next section.
Thank you

Gilsornette

Thank you Olivar,

But what I need is to get the info if a remote (OSC, MIDI...) is controlling the fader (or another object) . If I'm not mistaken the "has changed" module
would send datas also if there were a recorded automation or some modulation sent to the fader.

Gilsornette

Hello ,

Is there a way to change/modify parameters of grid sections? E.g.change loop mode from loop to next section.

Thank you

Gilsornette

Sorry Sylvain, I did not see your answer. When moving e.g. a fader with the mouse we can use the mouse down output to know it the fader is activated by an external gesture. But if there is a remote on this fader (Midi controller) it seems there is no way to get such information. That's why I was ask...

Gilsornette

Hello, Thank you very much for your help! I've got troubles when using the script; here's the error message I got when trying to save a "bank" of presets process msg SET_TARGET_PATCH PGM Var not found PGM SET_VAR patch 4268517304566742452=PGM process msg SAVE_PATCH bank 1 process msg RENAME_PATCH PG...

Gilsornette

Thank you very much!

Gilsornette

Hello,

Thank you for your reply.
That can be a solution for new presets, but a bit complicated for presets that have been created before (need to recall, rename them, etc...).
I was hoping there was an "implemented" solution:-)

Gilsornette

Hello, In Preset module, "save to file & load from file" allow to save and restore one preset, but what about a list of presets? In an old post Sylvain T wrote: "In HH5, you can save your presets list as a text file and reload it with or without confirmation" but I don't know how to do that. Thank y...

Gilsornette

Nice work!

Gilsornette

Bonjour,

Merci pour la réponse. "Save & load from file" ne sauvegarde qu'un preset, pas la liste des presets. Or je cherche à pouvoir sauvegarder l'ensemble des presets

(d'un patch, module, rack...). Une autre piste?

Gilsornette

Bonjour,

Il semble que ce soit possible de sauvegarder des listes de presets (Sylvain T a écrit dans un ancien post: "In HH5, you can save your presets list as a text file and reload it with or without confirmation"), mais je ne vois pas comment faire...
Merci

Gilsornette

Thank you very much, that's a good advice!

Gilsornette

Hello,
It seems it's possible to save presets list as texte file (Sylvain T wrote in an old post: "In HH5, you can save your presets list as a text file and reload it with or without confirmation")
but I can't find how to do this...

Gilsornette

Hello, Has anyone ever managed to record a dump SysEx (from a synth) with the SysEx Editor Module? On my side it's not working, the editor is always reset to size 1 with no datas recorded. I tried with other Sys Ex recorder (Midi Ox, Patch M4Live) and the dump is correct and well recorded. Thank you...

Gilsornette

Hello, merci beaucoup pour les conseils.
J'ai vérifié, le dernier message SysEx n'est pas vide. Je vais faire un post sur forum anglais pour voir si quelqu'un a réussi à enregistrer un dump.

Gilsornette

@cmodica and Sylvain T: thank you for your help. For now , I'll manage with switches and binds.

Gilsornette

C'est un Bass Station 2 . J'ai fait un test dans Live avec un patch Max4Live SysEx Recorder et ça fonctionne très bien également. SI je dois envoyer byte par byte alors qu'il y a 128 presets à sauvegarder ça commence à de venir compliqué (enfin surtout très lent... ). De ton côté as tu déjà utilisé ...

Gilsornette

Hello, et merci. Mais j'avais déjà essayé cette méthode et, chez moi en tous cas, ça ne fonctionne pas. Quand j'envoie mon dump depuis le synthé je vois bien le SysEx qui transite (en cliquant sur le câble reliant les deux modules, voire en faisant trace data), mais rien n'est stocké dans le module ...

Gilsornette

Hello again,
I understand this and use it also when needed, but in this case I want the sends (in the rack output) to be reseted.
And it seems maybe not possible...

Gilsornette

Salut , Merci pour lé réponse. J'ai mal formulé la question: je connais la procédure de dump de mon synthé, ce que je n'ai pas trouvé c'est comment, avec quel module/objet, enregistrer ce dump (le message SysEx) dans Usine? Je pensais que le piano roll pouvait le faire mais je ne récupère pas les in...

Gilsornette

Bonjour ,

Comment faire un Dump des presets d'un synthé avec Usine? Je cherche le moyen d'enregistrer du Sys Ex mais je ne sais trop comment faire.
Je pensais utiliser la sortie "events" du piano roll mais le Sys Ex ne semble pas en faire partie.
Merci d'avance

Gilsornette

Excusez moi pour ce post qui n'a rien à faire dans ce fil de discussion...

Gilsornette

Thank you for the advice but I'm not using busses, only "rack to rack" sends.I don't know if it's clear.

Gilsornette

It could be useful to have a remote output sending trigger as the mouse down output is doing. Thank you

Gilsornette

Hello, I use a lot of "sends" from one rack to another, and I often apply a controller remote to them. And sometimes I have suprises when loading a workspace with one of these sends that has been saved at full... Is there a way to send a reset to these sends on the opening of the wkp? Thank you in a...

Gilsornette

Thank you very much!
I didn't know it was possible to do that this way...

Gilsornette

Hello, In patch Groove Matrix (Library > audio > Audio groove) the 4 lines of cells have different colors and in the setup is written Colors > cells color(4), and we can see pink , orange, green, and blue segments. I can't find how to re^roduce that in a blank Matrix Panel. What am I missing? Thank ...

Gilsornette

Ok, I understand. Thank you very much!

Gilsornette

Hello, Thank you very much for this "bundle" of filters! There is a kind of bug when I connect them with modular inputs (type : audio): it works but I get this error message Error : GetEvtArrayData invalid index At the moment, I'm getting round this problem by inserting a volume module (acting like ...

Gilsornette

Hello,

I assumed that the "array shuffle" module was randomizing data's positions only when triggering the shuffle input
but, as I'm trying to use it in a patch, it seems it shuffles as soon as datas are incoming the module. Is that right?
Thank you.

Gilsornette

Thank you, I'll have a look to this.

Gilsornette

Thank you for the advice!

Gilsornette

Hello,

What would be an ideal laptop configuration (Windows OS) to make the most of HH5 (and next HH6...)?
If you can come up with some models and brands I thank you in advance.

Gilsornette

Yes I’ve tried but I can’t receive anything. thank you

Gilsornette

Thank you for the advice. But it doesn't work, no"key" seems to be sent.

Gilsornette

Hello,

I've got a (very) little pedal board (M wave -chocolate) that uses a bluetooth connection. It's detected by windows as FootCtrl.
Is there a way to use it with Usine?
Thank you

Gilsornette

Thank you!

Gilsornette

Hello, I'd like to get specific datas from Leap motion Gesture; i.e. "swipe left" which begin with ID 200 and have 11 different values. How can I filter easily those datas from the gesture array? Knowing that those datas are melted with other starting with different ID's (but each time with the elev...

Gilsornette

Hello, I've listed some requests, ideas, that I miss in Usine. Maybe some have already been asked, please excuse me if it's the case. And also don't hesitate to tell me if it's preferable to ask one by one. Here they are: - being able to rename libraries - having the possibility to resize the grid t...

Gilsornette

Yes, it's quite easy to patch. I use a rack with midi inputs and clock sources that I can patch to Mutant Brain.
Here is a screenshot

Gilsornette

Hello,
I’m using this one http://www.hexinverter.net/mutant-brain which is really "multipurpose" ( several cv, gates, you can configurate as you want...), but have no USB and is not cheap.
Or Doepfer Mcv 4, cheaper but with less possibilities https://doepfer.de/mcv4.htm

Gilsornette

Thank you very much for this quick, and clear, answer!

and sorry for the typing error...

Gilsornette

Hello,

When shall we use the thread option in Rack Calculation Mode? Is it when there are lots of patches inside
or "big" patches with heavy cpu consumption? Or in other cases.
Thank you

Gilsornette

Je vais refaire des essais alors. Merci!

Gilsornette

En fait c'est dans un sous patch que j'ai les presets. Du coup le module Usine Patch Settings ne fonctionne pas dans ce cas là, c'est bien ça?
En tous cas pas chez moi...

Gilsornette

ok, merci!

Gilsornette

Bonjour Sylvain, Une question en passant. Ne peut on pas le faire directement sur un Module Preset? Dans l'entrée "current". Chez moi le changement de preset s'opère mais j'ai un message d'erreur E032 erreur dans la procédure Callback TARGET:TuListBox/current MSG:00FAB679 WPARAM:0000AF01 LPARAM:0000...

Gilsornette

Hello Ariajazz, Here attached is a screenshot. In Setup Menu > lights: - the USB interface, if recognized, is listed and you have to click to activate it - you can choose the number of light plots that you want (here I've chosen 2) The lights plots appear in top header, between Tempo and Panic in th...

Gilsornette

Hi rlgsbt,

It's a very good idea. I'll have a look at it. Thank you!

Gilsornette

Hello,

I was wondering if it was possible to have a "point" cursor with a matrix module instead having a vertical or horizontal moving line?
Which means triggering only one cell instead of several (from a row or a line). It's to be used with a 8x8 matrix .
Thank you for your help

Gilsornette

ok thank you

Gilsornette

Thank you for the quick reply!
How can I modify the size of the bloc duration? use a * module? And shall I patch it to the in of delta?

Gilsornette

Hello, I need to calculate acceleration of a sound source moving in front of a microphone. I was thinking about measuring the increase (or decrease)of db level, using an enveloppe follower. and then calculate the difference of level during a certain amount of time (which give me the acceleration/spe...

Gilsornette

Ok! Thank you very much

Gilsornette

Hello,

In the release notes of V 5.2.220331 is written:
-[usine] new volume-gain fader on grid-module element
I can't find where or what it is. Could someone give me some information about this?
Thank you

Gilsornette

Merci!

Gilsornette

Bonjour,

Je vais faire des ateliers avec une classe de BTS et j'aimerais utiliser Motion Kit avec eux. Je voulais m'assurer que j'ai
bien le droit d'installer le logiciel sur leurs ordis, sans besoin de licence particulière.
Merci d'avance

Gilsornette

Thank you!

Gilsornette

Hello,

I can't find how to use the "new option to inc/decrement values of faders with arrow keys" in 5.2.220122.
Where does it appear?
Thank you in advance

Gilsornette

Hello,

Avec du retard... merci pour cet addon! Je n'ai pas encore tout exploré mais les filtres et disto sont effectivement très intéressants.
Super boulot!

Gilsornette

Hello,

J'ai installé le pack mais lorsque je tente d'ouvrir des exemples je n'arrive pas à trouver les fichiers media nécessaires (par ex accordeon dans persolivar\audio\piscine).
J'ai regardé entre autres dans le répertoire d'install d'Usine > config > addons mais je ne trouve pas.
Merci d'avance

Gilsornette

You're welcome!

Gilsornette

Hello,

I had the same problem some time ago and Senso resolves it by adding in Setup > Midi > Midi options > memorize device name in learn.
Uncheck it and Usine will only keep controllers , channel numbers for your assignations.
It should work I guess
All the best

Gilsornette

Hello, I've got problems with patches that are (graphically) reduced. I mean appearing in a small size by clicking on "-" in header. Sometimes when the patch is read in the grid it keeps its size but often it returns to the original (larger) size. I've tried to uncheck "auto resize" in the menu but ...

Gilsornette

This is the simpliest way...
Thank you very much!

Gilsornette

Hello, I'd like to extract (short) file names of a list comma text and to get all of them in a list box. [extract file name] is doing the job but only for one single name. I cannot use [comma text extract] because the paths will be different so the indexes will change. I' m sure there is a simple wa...

Gilsornette

I've tried again, with no results. And I'm also on Win 64.
here's my patch attached

patch.pat: (27.97 KiB) Downloaded 433 times

Gilsornette

Hello,

I don't find how to use microtuning function of midi sampler. I use an array (size 12), randomized (-1 to 1) to fill microtuning input,
but when I play on my keyboard I always get normal tuning. What am I missing?
Thank you

Gilsornette

Merci!

Gilsornette

Thank you Joffo. I had the same idea and I'm actually trying to manage with module Data Manipulation Rec XY, but I still have not found the right solution :-) Merci Joffo. J'ai eu la même idée et je cherche actuellement avec le module Data Manipulation Rec XY. Mais je n'ai pas encore trouvé la solut...

Gilsornette

Hello,

I've already posted this suggestion at the end of the previous topic but I'm not sure it was read.
So: for me it'd be very useful to have "quantized automation", which means to decide, before recording, if its length will be 1 Bar, 4 bars...

Gilsornette

That's a good idea. I'll try this.
Thank you!

Gilsornette

Another suggestion regarding automation: for me it'd be very useful to have "quantized automation", which means to decide, before recording, if its length will be 1 Bar, 4 bars....

Gilsornette

Gilsornette

Hello,

I'd like to insert a sub array of n elements starting at a specific position; in fact , the opposite of module Array extract.
How can I do this?
Thank you

Gilsornette

I was particularly interested in motion detection:-). No way, I'll use the old ones.
Thank you for your quick replies

Gilsornette

Thank you, that's a very good info I didn't know this. I return to my previous problem. Path Groove is correctly running when loaded from Motionkit directory but it's not the case for some others. E.g. Ringtone, additive, droid... Some data values are 0 and should be something else (Const, / amplitu...

Gilsornette

Another question, but maybe I should write a new post...
Is it possible to download PoseNet, and to run it offline?

Gilsornette

Hello,

If I open the workspace from Motionkit directory it works correctly.
It solves my problem, thank you!

Gilsornette

So, I've tried to save patches, rack and workspace, and then import them in Usine , but anytime it's not working.
Clicking on the window makes samples boxes disappear.
Some faders values are not correct. i.e tempo is 0 to 1, also for sample's fader.

Gilsornette

I'm using the same version of Usine ( also Win 64) but something is going wrong.
I'll have a look again. Thank you

Gilsornette

Thank you for your quick reply.
I've imported PathGroove in Usine but it doesn't start reading (moving), do you have an idea about what I'm missing?

Gilsornette

Hello,

Is there a way to edit Motionkit's patches inside Motionkit interface or should I save them and import them in Usine to do some modifications?
Thank you

Gilsornette

Thank you very much Sylvain!
all the best
Gilles

Gilsornette

Yes , please, I'd appreciate you send me an example.
Thank you very much!

Gilsornette

Hello, sorry I was a bit away (mentally speaking) for a few days.
@rlgbst: thank you very much, it's now clear for me!

But one more question: I did not specified I wanted to use Oscilloscope XY. It seems this module has no pixel size input.
Is there a way to manage with this or not?

Gilsornette

Thank you for your answer Sylvain. I'm not sure to well understand everything you said, so I'll do some tries and see if it's what I'm looking for.

Gilsornette

Hello,
It would be nice to use module Oscilloscope as a video module; so could it be possible to have its output (bitmap, or else) in
higher definition?
thank you

Gilsornette

Thank you for your answer. I've tried changing the graphic quality but it doesn't change a lot.
I'll suggest it.

Gilsornette

Hello,

I was wondering if it was possible to get the output of the Oscilloscope module to be used in "high definition mode".
Thank you

Gilsornette

That's a way to do it... Thank you!

Gilsornette

Hello,

I'd like to use a keystroke inside a patch. How can I "capture" it? Is there a kind of [ASCII to Numbers] module?
Thank you

Gilsornette

ok I'll try to search this way, thank you. I'll also mention it as a suggestion

Gilsornette

@Joffo78: thank you for the patch. It's almost the right solution. But as the player reads first a small part of sound, than jump to the marker, we hear a click.
It's really audible if the maker is set in a low level part of the sample.

Gilsornette

Using normal sample player, I want the start position of a sample being on, for example if it's a rythmic sample, second beat . Not starting from the beginnig of the sample but looping on the whole sample anyway. Maybe it's not possible with this player but it seems, for me, to be a very basic funct...

Gilsornette

Hello, Yes I've tried but it's the same problem, reducing the sample loop to the length between two markers. What could be fine also is to "snap" markers on grid lines otherwise it's not very convenient Something else: it seems that cross fade looper is not working properly: on start it's not loopin...

Gilsornette

Thank you for your quick answer. This way will reduce the length of the loop but I want to keep the original duration.

Gilsornette

Hello,

I want to set an offset , to "shift" the start position of a rythmic sample using normal sample player. I can't find how to do that.
I don't want to use crossfade loop player because th grid (of the sample player) is useful for me to set my new start position.
I hope it's clear.
Thank you

Gilsornette

En fait j'ai trouvé une solution, mais pas super pratique. J'utilise un patch Max (V 5 32 bits car ne fonctionne pas en 64bits) pour récupérer les données de la wiimote et je les route vers Usine

Gilsornette

Ca n'a malheureusement pas la discrétion de la Wiimote. Mais il y a bien les boutons;-)
Je crois que je vais me rabattre sur un petit smartphone mais ça ne m'enchante pas.

Gilsornette

J'ai déjà tenté de changer le Wiimote num mais ça ne fonctionne pas.
Qu'y a-t-il d'autre en capteur sans fil , ergonomique, et avec quelques boutons? Genre wiimote quoi;-)

Gilsornette

Bonjour,

Je relance ce post car j'arrive à connecter une wiimote avec Windows 10 (en utilisant Bluesoleil + 1 Bluetooth USB) mais le module Wiimote (le module HID également)
ne m'affiche aucune donnée.
Une piste , une éventuelle solution?
Merci d'avance

Gilsornette

Thank you very much!

Gilsornette

Even in Bezier mode it can be very long and not "human/natural" when you want it during a certain duration. Do you think it "drag and drop patches of curves automation on the grid" could be a future improvement? No matter where I shift + click, I'm just accessing to the menu of the sections or lines...

Gilsornette

thank you for your quick answer!
Creating a curve is not so efficient and smooth than recording automations (fast moves of a fader for example). Or is there a way to draw a curve, like with a pen?
Sorry for this question, but... where should I Shift + right click to add a design tab?

Gilsornette

Hello,

Am I missing something or it's not possible to drag and drop patches of curves automation on the grid?
Also one question regarding the grid interface: is there a way to customize it, especially the global background and the vertical lines inside the sections?
Thank you
.

Gilsornette

Thank you x.iso!

Gilsornette

Hello I'm using a [stepslider] object in Lemur to control a [data sequenced steps] in Usine. They have 16 steps. I use an OSC lister in Usine to receive the different parameters (stepslider/x-01, stepslider/x-02...) and apply them to the [Data Seq Step] and it works well. First question: is that the...

Gilsornette

Thank you Oli!

Gilsornette

Maybe.But If I use "save name" the reading is not interrupt and does not restart...

Gilsornette

Hello, I want to use the "save random" function of module [audio grain sampler] while reading a sample. But when I trigger the "save random" input it also restarts the reading at its beginning. Do you have an idea on how to avoid it? Having a continuous play and saving at the same time. Thank you fo...

Gilsornette

Thank you Sylvain! I made little modifications and tht's exactly what I wanted

Gilsornette

Thank you x.iso, nay-seven! I'll have a look to that really soon and get back to you.

Gilsornette

My question wasn't clear enough. On loading a certain rack I'd like a midi remote to be automatically assign to the gain output of that rack. For that I could just record the rack with the midi remote asssignment, but I'd like to be able to load severall racks and that my midi remotes increment at e...

Gilsornette

I can't see how.

Gilsornette

Hello,

Is there a way to assign, in a patch, a midi remote to a rack output? Via a message or a particular module?
Thank you

Welcome to %s forums

Search found 278 matches