Welcome to %s forums

goyya76

Hi all, as far as i see the Midi Expand Voices Script can be used to split the notes of a chord and send them to different MIDI channel - i would like to modify it in such a way that the lowest note is sent to ch 1, the second lowest to ch 2 etc, like in this example: C2--->ch1 C3--->ch2 E3--->ch3 G...

goyya76

hi all, i quickly scrolled through the discussion - don't know if it's on topic, anyway...i remember some time ago i've seen some hi-fi system by Yamaha which claimed to give surround sound with just two units.... http://usa.yamaha.com/products/audio-visual/hometheater-systems/front-virtual-surround...

goyya76

don't know if it's been already posted.... http://www.harmonycentral.com/blogs/News-Music-Computing/2010/11/02/music-computing-rolls-out-new-large-format-motion-controlled-multi-touchscreens They say "affordable" - maybe 1500 USD for a 32" multitouch is RELATIVELY not a lot (for me, it's a lot in AB...

goyya76

Hello all....anyone heard/tried Keetouch touch panels?? it's a Chinese manufacturer, with a huge catalogue - i was having a look at prices for 24" touch screen kits, and found this single touch/multi touch (surface acoustic wave technology) for 106/165 $ (!?) http://www.keetouch.cn/catalogue/saw_tou...

goyya76

Congratulations!

(both for V5 and the prize)

goyya76

Same to you! (and let me join you in your greeting to everyone here!)

Cheers,
Goyya

goyya76

regarding the dawtouch... i thought (without cheking on their site) that it was multitouch, just by looking the youtube vid (obviously, i have to improve my English listening!) then...the fact that "The system currently acts like a standard mouse input to your software" make it sound rather overpric...

goyya76

Hi all!

About "dropping lots of cash" (2995 USD)...so probably it's just out of curiosity for most of us:

http://www.youtube.com/watch?v=4xO1rDezfzY

http://dawtouch.com/default.aspx

Damn if it looks good!

goyya76

@23fx23: which brand of touch panel you have chosen? in another thread (opened by me, BTW) you told that you got your one for 75 EUR on ebay...i just wanted to check and be sure that if i get one on ebay, its driver allow for multi-monitor use...

Thanks in advance!

ciao, Goyya

goyya76

23fx23, your 2 cents make sense!

goyya76

hello guys....i noticed that more than one touch panel at a time can be used - at least panels by Keytech (www.magictouch.com), i got a confirmation email from them....

goyya76

thanks guys - i was pretty sure i would have found an answer here! in Italy we say "hunger comes while eating"...meaning that (after 23fx23's answer) i wonder if three monitors could be used at the same time (apart from having i guess two video interfaces or anyway a compatible setup)..... the origi...

goyya76

hi all, just a quick one - how does a 24" monitor + a 17" one with the touch screen kit sounds like? the idea would be to use the smaller one only to visualize VST/VSTi GUIs (and of course use a finger to interact).... My feeling is that it would not work...as far as i know, a touch screen kit is ju...

goyya76

Thanks Bsork!

goyya76

Hello guys, i tried to "play" with the new phase vocoder module...and a question came to my mind: how can i multiply the elements of two arrays? i mean, given array A and array B, do A1 x B1, A2 x B2,..., An x Bn (where n is the lenght of the array) and put the result in another array...i hope i'm n...

goyya76

Nay i guess you are right - i'll do some trial&error then re-post in the patching question to share (hopefully!)...

goyya76

hello! i have to admit i still have to learn how to deal with arrays...so here's my question: am i wrong if i think that i can use the output of the FFT forward module to do some resynthesis on the input sound (for example enhancing some frequencies, splitting the input sound into different bands et...

goyya76

Thanks a lot guys for your answer.... Anyway i'm getting away with the idea of using a joystick: some button combinations aren't possible....buttons have pins in common (for example, button 1 and button 2 are linked to three pin on the joystick board - obviously one pin is common): when i keep them ...

goyya76

Hi guys! I have seen a USB module, under the "interface control" menu....but i didn't find anything on the wiki nor in the forum (maybe it's just my fault!) - i tried it with a joystick and i realized it outputs the position of a control with no reference to the control itself (for example moving th...

goyya76

hello Nay Seven...+1 to try the plugin (though i must be honest: i'm rather busy with non-music stuff these days!)

goyya76

hi all, i used a usb joystik electronics to build a pedalboard with 11 buttons....so i can't use the Usine built in joystick module (cos it supports 4 buttons only) - i tried the joystick addon (thanks nay seven!!) but i notice it adds some latancy which does not fit with using the pedalboard live f...

goyya76

Good God...that's what i call a bad day!

Cheers,
Goyya

goyya76

....having a one shot 1 value that returns to zero? I'm trying to build a patch that outputs a constant "1" unitl the audio input goes below a threshold...apart from the peak follower, I tried with a simple A>B module, but it seems that the output value is re-calculated each Usine cycle (so i have a...

goyya76

hi Nay, a quick one: i suppose your joystick addon is compatible with USB ones - correct?

goyya76

Thanks!! i've read both answers, your add-on seems fine for me - now i just need to buy a USB joystick

cheers, Goyya

goyya76

Hi all - i just bought a playstation like cheap gamepad discovering that both joysticks aren't potentiometers (simple switches instead)...any suggestion??

goyya76

(the title says it all)

cheers,
Goyya

goyya76

fair enough - thanks!

goyya76

@23fx23: another very useful feedback, thanks! luckily Usine interface allows to resize knobs....that means that i'm going to jump on the touch screen board! just another question: do you think such kits can be taken on stage? i have built a pc into a tool case (the screen is mounted inside the uppe...

goyya76

thanks a lot - i realized these kits controls the mouse position (maybe it's obvious) within a certain operative area - things are much more easy than i thought!

goyya76

Hi all, i gave a quick look thorugh the forums, i hope i'm not doubling another thread... has anyone tried a touch screen kit (those that can be applied on an existing monitor)?? Also, i'm pretty sure that the touch panel has to be of the same size and resolution of the monitor (say 17",1280x1024) -...

goyya76

? usine values should always dominate hardware values and not the other way around? which behavior is more logical? hi! I had a strong feeling that remote update was for motorized faders and led rings....i vote for the first option: i think most of the times you want the hardware to follow the soft...

goyya76

hi guys, thans for the feedback! @Amiga: i read your post, i'll read it again to grasp everything and answer...@Ethnix: i'll try your add-on asap, in the mean time i ask myself: with the new skinnable graphic engine, maybe it's possible to have your new knobs on the same position...i mean, a knob wh...

goyya76

Hi all! i was looking for a compact controller (something that could be taken on stage, to control a Usine-powered guitar rig) - i already have an Evolution UC33 lying around...the main issue is that it has potentiometers, and i was looking for something with encoders to avoid parameter jumping (i k...

goyya76

hi Bsork, i'll post them asap - i suggest not to build such a thing: if you're wife sees you're able to DIY for music....imagine what she can ask for your home!!

just kidding....

Ciao,
Goyya

goyya76

hi all, my two cents....i'm about to use Usine as a guitar amp+FX simulator - i've built a PC into a case (you know, those used by plumbers for their tools) - a 19" wide monitor fits the upper lip, the PC components are mounted on plywood in the lower part, and i made a cover with an aluminium sheet...

goyya76

thanks for the attention! even auto-naming of a text field or label could work (don't know if it's easier than a knob)...

Ciao,
Goyya

goyya76

here we are again....the "fast creation" mode is really useful - i was wondering whether is possible to do something similar in the opposite way: suppose i have a sub-patch with 16 knobs, a way to auto-name them when i connect them to a pin.... If there's no way, it could become a suggestion! Ciao, ...

goyya76

@nay seven: trying in a few minutes.....i should have read the fu****g manual i guess!

thanks,

Goyya

EDIT: i tried it - fantastic! thanks a lot....i could not believe it was so simple!

goyya76

+1!
Actually, i was reading the forum and was ready to post a similar suggestion: if i link a knob to a VST parameter, it would be nice that the knob automatically gets the name of the parameter (so you don't have to type it manually.....) - maybe it's simpler than the combo box??

Ciao,
Goyya

goyya76

hi guys - just to check if my mind still works well....i've seen some days ago a beta2 link....was i dreaming, or maybe it was just removed??

i eventually have some time to play with the vst version...can't wait to give it a try!

Ciao,
goyya

goyya76

yeah!!

goyya76

dloaded yesterday night - pretty curious to try it! BTW, i worked a little bit with your NRPN patch - if i add a module to generate cc 38, works fine with my REV2496 (turning the knob i genereate the four CCs which made up a 14 bit NRPN)... The trouble is that the CC is generated each time the Has C...

goyya76

yesterday evening a thoyght and a question came to my mind... Thought: if i understood correctly,Usine VST will allow ten stereo UsineVST - say i need five more...would it be possible to load more, just opening a second Usine instance, and route the five more Usine VST to it? (maybe just having Usin...

goyya76

runagate wrote:I wonder how many of the 800+ views on this topic are from me checking every couple days?

This is going to be so great.

i check once a day from the office, once a day from home at night - you are not alone!

goyya76

It looks more than powerfull ! i agree...but then a question arise: will UsineVST 1, 2, 3 be simple bridges to the main Usine (in which we'll set up channel 1, channel 2, etc, with a single GUI) or they will have their own modular environment (so each instance would act as a FX chainer like Energy/...

goyya76

thanks senso , but was first for goyya76 , exept if you have also a rev2496....;-)) hi nay-seven....i check this forum twice a day, but i missed your post with the patch! sorry - however i downloaded and tried it yesterday - i see it creates CC 98, 99 and 6 - the REV2496 receive LED blinks,but the ...

goyya76

the title says it all - will it be possible in the future? just out of curiosity, i recognize it's not a priority! (but there are very nice "BCR like" knobs made by Kvr member asseca....)

Ciao,
Goyya

goyya76

hello....quick question (while waiting for the VST version....): will standalone Usine patches be compatible with the VST one? (if the answer it's yes, it's time to anticipate some work and start builfing monster synth/effects configurations!)

Ciao,
Goyya

goyya76

ho , and for info senso your bcr2000 can handle NRPN i think..;-) I confirm it, i have it too - i made a program to control my REV2496 (which uses NRPNs) and it worked flawlessly (actually i used the BCEditor from the BCR/F yahoo group people) - however, i opened this thread: http://www.sensomusic....

goyya76

yes of course!

goyya76

woo...i have a Behringer REV2496 which works with NRPN (so i guess i'll be candidate #1), but actually i'm not very expert of floats/integers etc - i suppose the idea is: - receiving NRPN: combine two 7bit CCs in a 14bit number, then convert it to a float parameter that can be interpreted/assigned i...

goyya76

The title says it all....

goyya76

senso wrote:yes of course!

LOVELY....

goyya76

+1 for the beta testing....also a question: will usine vst show paramters to the host? Xlutop Chainer, for example (i suppose EnergyXT too): each istance of it show 127 parameters to the host - inside chainer, the parameters can be assigned to the loaded vsts....that would be very useful (if you use...

goyya76

Just downladed twicw but....the file seems broken! you know, when you try to decompress it, a pop up "pops up" saying it's damaged....

Ciao,

Goyya

goyya76

beautiful.....looking forward for it!

goyya76

Hi, I did some trials - the output msg from cubase is correct (checked with MidiOX), the problem should not depenf on MIDIYoke (it happes even using a hardware MIDI in/out, i.e. cubase outputs on the MIDI OUT of the soundcard, which is cabled to the soundcard's MIDI IN, activated in Usine).... maybe...

goyya76

You are right...too much things together! yesterday i realized that probably in the patch remote panel of the two knobs, the "remote" button was off - switching it on seemed to solve the problem (gonna check again), maybe it was just the right thing to do.....

Ciao,
Goyya

goyya76

Hi all, i'm using Usine to process midi traffic between a BCR2000 and Cubase; i have two knobs on two different tracks which receive the same midi message from cubase through midiyoke - after a few minutes of use, they stop responding the incoming message... Any suggestion/pointing towards similar t...

goyya76

hi all, just thinking about the VST version...i think a double VST/VSTi version like energyXT would be very useful - i must admit i didn't look if this has just been mentioned on the forum...i have a feeling it should not be difficult - as far as i've seen experimenting with Synthedit, the .dll shou...

goyya76

Or Chainer VST host, for that matter. hello, i have Chainer...but i'd love to have a modular "chainer" in Cubase! as a guitar player, it would be useful to create guitar sounds on the standalone usine, then simply load the patch in Usine VST as an insert when it comes to record - also while buildin...

goyya76

Hi Nay-seven&bsork, thanks a lot for your feedback - i'm going to try with Usine and let you know (nay, thanks for your kindness!).... In the meantime, i bought Usine Pro, and i must say that it seems a perfect tool to manage the midi flow between hardware (keyboard, BCF, BCR, effects) and the seque...

goyya76

hi all...i know about Usine since v1, but i still didn't dig into it - quick question: if i create an interface (say 8 knobs), i see it's possible to assign a CC each one knob to control them remotely (say CC 1-8, from a BCF2000 encoder to Usine knob) ....can i assign a different midi output to the ...

goyya76

hi guys - Zoot, have a look at http://launch.groups.yahoo.com/group/bc2000 -
there's a guy who disassembled the FCB1010 firmware and reprogrammed it adding more functions - i don't know more cos i got into the group has a bcr+bcf owner, but maybe there's something that could help!

Ciao,
Goyya

goyya76

hi, it's nice to know that the vst version is in progress! Personally i'd go for a vst plugin version, but i guess i can get used to a "legree-like" solution too....

have a nice day and a "happy coding",

Goyya

goyya76

Hi all, after reading these later posts, i agree on the one-patch version - Usine as a VST/VSTi in another host could leave the "sequencing" functions to the host, retaining the modular structure/total remote control/interface building capacities....maybe multi outs could be handy too.... to me the ...

goyya76

Hi - i tried Usine long time ago (i guess it was 2.2), now i'm back on it...i think a vst version would rock - for me the best solution would be the patch version, because it would represent a modular environment perfect to work with FX within a host: modular, with EACH parameter assignable to a key...

goyya76

don't know if someone has just suggested it.....i've read in the forum that turning Usine into a vst plug-in would be difficult - maybe rewire compatibility (Usine slave) would be more feasible??
however i really like Usine....thanks!

cheers ^_^

Welcome to %s forums

Search found 69 matches

Login • Register