Welcome to %s forums

yes, given the specs Lenovo Miix Tablet may have trouble with DAWs in general due to CPU not up for the task. For audio processing you need as much CPU power as possible and any Atom based tablet is not really designed for power intensive tasks. as for Thinkpad, maybe without hardware acceleration ...

Thanks, x.iso! The specs for the Lenovo Miix Tablet: Win 10/32 Intel Atom CPU Z3795 1.6GHz Intel HD Graphics Bay Trail GPU 10.18.10.4491WHQL Driver Direct X 11 The Lenovo Thinkpad T410 Win 7/32 Intel i5 520M CPU 2.4GHz Intel HD Graphics Arrandale GPU 2117PC14.34 BIOS 8.15.10.2993WHQL Driver Dirext X...

HH3 works fine on my Win 10/64 Gforce G710 Direct X12
It starts stuttering with only a few modules on my T410 Win 7/32 Intel HD Direct X10.1 and also Win 10/64 Intel HD
The same problem on my Lenovo Miix Tablet, Win 10/32 Intel HD Direct X 11

HH2 works fine on all my computers.

thanks, senso.
I am working on a few compostitions with extended glissandi and a bit of additive synthesis, that's what I need the patch for.

I just did a small Harmonics Synthesizer inspired by the one Saltline did here . The Voice Dispatcher module for polyphonic patches only dispatches code1(pitch) information, but no code2(velocity). Now I use the code2 from the MIDI in, but this way all oscillators adapt the last velocity information...

Thanks trik for replying. I don't get the idea, which master sync?? can you be more specific? thanks There is a module that controls the master tempo of usine. here it is in the manual. You connect its 8th led output to the input called 'next step' in the module for sequenced switches. here With th...

From the top of my head, I'd say:
connect the 8 led out from the master sync to a switch counter that counts to 7. These switches can toggle record and playback.

When you use the Interface Builder you can always show/hide subpatches with a switch.

what about a midi in and out for every fader, knob, xy plane, etc? Then we could connect them to a midi output module, route the midi to a daw (e.g. with midi yoke) and record every session we play with usine. when we play back the recorded midi in the daw we send it back to usine were goes to the m...

The Tobybear Microtuning vst sends a pitchbend message along with every midi note. http://www.tobybear.de/p_midibag.html Yes, that is maybe not an elegant solution. To build a synth with the usine oscillators we would simply need a midi note to frequency converter that can load scl files. Even bette...

recording parts of the original, setting and jumping between the markers in the sample.
https://soundcloud.com/aalemarie/konstr ... -aalemarie

I made a 6-band harmonic equallizer. It takes a note from the midi input and applies a notch filter to the audio input on the frequency of this note and its first 5 harmonics. When the gain+- is set to a positive db value it can be used as a simple vocoder. When the gain+- is set to a negative db va...

the sample never plays to the -end pos-.
i worked around it by setting the -end pos- to 100% and then triggering the -stop- when -pos- is at the desired end position. at the end, however, it plays only to 99,9%, not 100%.

the sampler does not play the sample until it reaches the -end pos-. instead it stops between 0.21% and 0.23% early. i would e.g. play a sample that goes from -start pos- 11% to -end pos- 25%. when i play the sample it stops at -pos- 24,79%. is there any solution for that? or is there a way to calcu...

At the moment I use the sequencer to record my usine performances (i.e. fader movements). But for every fader I have to build a recording patch within a midi track in the sequencer. It would be much easier if there was a automation-record-button that records every move anywhere in usine into the seq...

i'm very happy with all the cable connections i can do in the patch editor. but my idea was to bring cables to the interface to use them in a live setup, since this would need much less buttons than a matrix solution. (is that possible with the "expand" button?) i my small example there is an envelo...

i'm building a set where several sequences influence the sound and form of each other. i got the idea from my analog modular liveset. now i tried to remodel the analog possibility to connect data ins and outs with a usine matrix. turns out this needs a hell lot of buttons and gets very confusing. it...

this is a workaround to freely change the end position of a piano roll loop. the start ist still quantized.
http://sensomusic.com/downloadaddon.php ... ition_.pat

in the piano roll the start point and the end point are allways quantized to 8th notes. now i am playing music with beatmorphing, but i can not smoothly morph from one lenght to another with quantisation. could you add a button for a free range start and end point? is there a workaround without the ...

@senso:
is the tx2 not powerful enough to run usine? or to support 4 touch points?

future 4point tablets:
HP Slate
Fujitsu Lifebook t580

trying to upgrade my setup, i tried to find a display with more than 2 touch points. for a life performance 2 is like playing the piano with 2 fingers... so here is what i found: tablet: Dell Latitude xt, xt2 HP TouchSmart tx2 Stantum Slate monitors: M2256PW clams: Dell Studio 17" Lenovo t400s (sour...

the new version gives me distorted audio output. i changed various audio settings but nothing helped. changing the buffer size changes the sound of the distortion. can you put up older versions of the free version for download so i can find out wich one works? i'm using a single core athlon 64 and a...

nay, the plugins you mentioned work fine for me. mind that you have to select the target track and press play to receive the midi on your target.
usine is the only one that doesn't work, so i think it's a problem within usine.

nay, can you tell me which plugins did not work? i'll post something on the xt board.

i used to have a license for usine till v3.68 and now i want to upgrade to use it as a vst in ernergy-xt. i tried the latest demo vst, but the midi outs don't work. in usine the "trace midi" function shows output, but i don't receive anything in xt. is it a bug or do i need a special setup? (same pr...

i don't have time for the workshop, but i'd like to drop by to hear the final set