Welcome to %s forums

GDLive

Hi Folks, Since only legacy midi peripherals are available in uSine midi devices parameters, I wonder if something is on the roadmap to allow the use of BLEmidi peripherals inside of the application. (something like, serial or HID module ?) May be I'm missing something and it is already done and pos...

GDLive

Hum, if Usine is unable to register behind a proxy, it could explain that it fails behind complex network architecture...
Should we open or route some ports ?

GDLive

Being back after a few years, [s]I have the same issue. Thanks for the information ![/s]
In fact, disabling firewall, and router firewall and checking host file, I've no problem with mentioned address (ping successful), but registering fails.

GDLive

@Simon : uSine is a exceptionally frustrating tool for young parents, I confirm

GDLive

Et bien woualà !!!

Thanks Martin, and keep on doing this great job !!

GDLive

About this topic, it would be useful if someone of the team could confirm our hypotheses about interactions between callback and process procedure, and with the set output refresh possibilities vs nb blocks in a callback procedure. In my mind, those informations could be added in the script callback...

GDLive

No, I don't use traktor, and this is my problem to reverse engineer the hsb protocol, on which I could'nt find informations. In theory, the istage is traktor compatible, there are map on internet, but I don't know how to convert the messages. I'll miss some time today, but my goal is to post a patch...

GDLive

awesome for a vu-meter, I've to post a video !!!

To bad I'm just able to change one color

GDLive

Here we are. Trying to count blocs in the process and wait for this sum in the callback procedure => no success. One the callback has begun, it seem's that the process is in stand-by. Then I did the opposite, as proposed in midi script : loop in the main process => it work's. here's the code. looks ...

GDLive

Hello, thanks for the replies. I would prefer normal scale as integer for a multi-usage script. For example, I plan to use it also to represent a controller value. About the icon istage, I tried with no success to get informations from the support about the traktor mode or mackie control mode. Witho...

GDLive

Ok, what I want to do : I'm trying to do a "generic" patch for a new control surface I bought. (Icon iStage). It's possible to use this hardware like a launchpad (led matrix). If I want to use one line or one column like a vu meter, I should be able to send parameters to light on or off the addresse...

GDLive

Very kind ! Don't stress, since I'll have to get my childs.. I'll be back late on the forum or tomorrow.. Nothing urge !

GDLive

Thank you very much for your help !

I wonder if you are flooding the output with all of them and that is why you only see the minimum and maximum.

I imagine it's something like that, but same result in Process or ProcessIDLE procedure !!

GDLive

(we could forget the reset of the counter, I wanted to count the has changed values to be sure not to miss some intermediates values)

GDLive

Are you trying to create the in-between integers, between -10 and 10?

Yes ! (and with the [c]ftrace(getvalue(dataOutContinious));[/c], I see that it's working) :/

GDLive

No change with setmin setmax & setfastcallback false or true

GDLive

Hello, I've tried to write a basic and little script to gives intermediates integer while input has changed with a step (0-10 for example). [c]/ parameters declaration var dataIn, dataOutContinious : Tparameter; var current : single; var i : single; // initialisation : create parameters procedure in...

GDLive

Cool

I had 3 days without kids this week and planned to learn that... Next time...

GDLive

Yes, waiting for the new open source SDK too !! (sourceforge empty)

GDLive

Hello !

J'ai justement testé le WE dernier, sur mac os X, pas de latence particulière rencontrée avec un tapis usb et hollyhook de mon côté !

GDLive

you are free to subscribe to the english forum rss feed, that what I do with a RSS aggregator, and you could have news on release ....
It works well, but there are many items with the new hollyhock... You've to read the the title... if you want to pass through fan posts

GDLive

Yahooo ! Download in progress !! Happy to be at home today !!

:):) I know what I will do

GDLive

agree with Joffo, a "popular" indicator would be welcome to orient the visitor

GDLive

I play with it since 30 min, nice work !

GDLive

thanks to share ! I planned to build one, not needed yet !!

GDLive

percuson, I was only wondering if there couldn't be a clic and the end of the slice, before silent ; especially if zerocross isn't checked ?

GDLive

@ Joffo : It could be useful (for me I think) to give the hability to bypass the random slice, like it's proposed on other parameters.
Maybe it could also help to understand when cracks occur

GDLive

You're right percuson, it's better to separate.

I'm asking myself what append if the step duration is shorter than the interval between the two markers, may be we should add a test on that ?

nb : I haven't uSine here to test the last patch version, I'll try ... this we

GDLive

I 've uploaded the subpatch http://www.sensomusic.com/downloadaddon.php?file=Len%202%20Pitched%20Len.pat, with could be useful for other

GDLive

Nice work, I tried and seems ok for monophonic instrument too. I'm a bit confused with tempo calculation and number of markers, but no matter.:rolleyes: I propose a updated version, with an ASR declenched and calculated for each step and taking in account pitch to avoid clics (when len pitched sampl...

GDLive

looks very nice and powerfull, have to test that !
No sure what he could detect as beat with a monophonic instrument like clarinet, but I will try

Thanks Joffo

GDLive

Congratulations to the team !

What a nice Christmas announce !

GDLive

ok !

The only difficulties that are staying concern colour-blinds...

GDLive

I'm a little afraid that "lego orientation" will engage uSine into "puredata" or "Max" way, I choose uSine because of it's more intuitive and direct result possibilities. Mixing desk should last ? No ?

GDLive

[yes, mais c'est nounou power cet aprem ! ]

tu as réussi à boucler sans craquements, uniquement avec des samplers en mode boucle ?

GDLive

Aller, ça me motive pour me remettre à usine après toutes ces semaines de pouponing, merci joffo !

GDLive

Bien plus élaboré que mon pauvre keeponplaying ! +++

GDLive

I've a second hand FCB1010, which was cheap but do the job.

It is a little heavy, but with lot of switchs

GDLive

Pareil. Ça me rappelle mes expériences de transposition en temps réel, je n'y arrivait qu'en faisant un truc super compliqué avec des rampes ; au final écroulais apparemment le CPU avec tout ce que j'ajoutais en plus. Mais bon, ici avec 2 samplers seulement, ça doit pouvoir marcher. Tu peux piloter ...

GDLive

Don't know, but I tried a few times Steve Reich 6 marimba, (and for the mother also during the long hours in maternity clinics before t0...)

GDLive

Thanks, Nay ! And effectively, I haven't found the mute button yet... may something like that http://www.sensomusic.com/forums/viewtopic.php?id=3311 with mother voice.... need some time !

GDLive

Sure I'll* try this with my augmented bass clarinet with the z rotation movement ! Thanx a lot for the explanation ! * I'm still alive, but I'haven't played with uSine for I while :-( ! (since I saw joffo and the lucid brain integrative project in paris... I think..) I'm just on a new project ... [f...

GDLive

Hello Joffo,
Je monte sur Paris semaine prochaine, tu peux me dire où trouver plus d'infos sur ta performance le samedi 10 mars ?
A+

GD

GDLive

sorry for the delay, no internet for 3 days...

I think that you could use the Nay proposal (step fader) coupled with a 'on activation" or 'on initialisation" subpatch to reset the fader to the first value. You could find them in "interface control" directory

GDLive

I don't know if there is a link, but I've mainly similar comportment as soon as disable the last active track with audio out in patches.

GDLive

whooo, looks very headaching collaborative work...

I'm sure this patch could have solve previous patching problems, but don't remember really where :rolleyes:

Congrats to the team !

GDLive

Hi javanaiz,

here is the more stuff I was written about :

http://www.sensomusic.com/forums/uploads.php?file=KeepOnPlayingMono%20v1.2%20version%20pedale.pat

But I must admit that Nay gave a more elegant solution...

I'll try to remember of this step module next time....

GDLive

Thanks, I use this patch in a same way. Actually if you want to pilot this patch with one pedal for example, you have to add some more stuff, like a switch with 0to1 and 1to0 detection for start and stop for example. I haven't modified this patch for a while, may be there would be stuff to optimize...

GDLive

Considering what is written before, Csound could be a great thing for serial adaptation. As far as I'm concerned, I was only imagining using arduino as a controller, no audio through this card ; that's true that midi is not the answer to interact with the card and audio events. You have arduino clon...

GDLive

yes, I said too much... ;) very busy this time. After a break, I'm back to : 1 - mettre à jour mon site avec le projet 2 - profiter de cette occase pour reprendre la guideline in english for the usiners. (Je voulais pas commencer à communiquer sur plusieurs forum/sites à la fois je m'attendais à une...

GDLive

And if you have midi messages, you could use uSine...

GDLive

Arduino like other pic embedded with usb com port could generate midi messages (which are serial messages). If you use a specific com port driver which allows you to set the correct bitrate, you just have to use virtual midi port to receive it. It seems that the synpad you linked uses this solution....

GDLive

Ok, I am probably a little tired and I'm afraid not to completely understand this topic :
the 5.80.004 is a beta and the 5.80.022 is a stable version but not yet available :rolleyes: ?

GDLive

Ok, I understand,
I didn't though that every tracks are in fact stereo track, even if there isn't any input selected on his top, then I imagine that it is a consequence of uSine principles.

Thanks Senso for the rapid answer.

GDLive

As discussed earlier in this french topic months ago, a small thing that nerves me..:/ http://www.sensomusic.com/forums/viewtopic.php?id=3080 I would appreciate that the output of a track with a mono patch would behave in the same way in rack/all mode than in grid mode ! In one case, we obtain a cen...

GDLive

mmh, this gives me lots of ideas... thanks !

GDLive

I should have thought to that evidence..:rolleyes: thanks I'll try it this WE !

GDLive

Thanks Tanabarbier, but where should we find the wavetable.dll ?:(

GDLive

much more affordable and fully customisable :

http://www.youtube.com/watch?feature=player_embedded&v=r7Bp7DtlbeA

GDLive

Les bus rajoutent de la latence ? je viens de comprendre le fonctionnement bizarre d'un ou deux de mes trucs !!

GDLive

alors là il faut un usiner senior, comme ils disent ds les boites de conseil.... je passe mon tour..:rolleyes:

GDLive

Very fun, but lot of time to spend if you try this way ...

Good challenge !!

GDLive

You're a friend of Judikael Mauffret who likes scrch & chrrr a lot !

Nice

GDLive

Nice !

I like the de-structured like improvisation on top on structured basis

GDLive

That means that you assemble and mix in reaper some sounds mainly generated with uSine ?

Sounds nice even if short ! !

GDLive

I have tried a lot of thing in thoses fade in out questions..

Last time, I used ASR modules and in fact I retain it for my new patch, I suggest you to try that, because ASR does a lot of the ramp job and parametrize

http://www.sensomusic.com/forums/uploads.php?file=2011-11-07%2022-14-22.png

GDLive

Même si ça semble pas toujours plus simple à première vue car il est souvent possible de jouer sur des paramétrages et regroupements pour limiter le nombre de fils, l'avantage des solutions en "parallèle" avec x fois le même principe (tes bus) permet souvent de prendre moins de temps à debugger, com...

GDLive

In fact, it's seem's to be impossible to get automatically a single value from a polyphonic sub patch data out in order to do a "once" treatment inside of this polyphonic sub patch. I write what I understood if someone is being confused for the same context. In multiphony, the data out is systematic...

GDLive

Ah, ok, I'll have a look, thanks for the idea

GDLive

Good job !
I've pb with the workspace, missing at least user module AoN_Random.usr

GDLive

staying confused :rolleyes:

Could someone explain what we should get using data out connected with to a value depending of the voice (or not) in multiphonic subpatch ?

GDLive

Thanks woodslanding, I did with a similar technique, going back to a collection of outputs which aren't used at all...
I wonder if someone succeed using this particular use of output in polyphonic sub patch !!

GDLive

Ok, its not really what I tried to explain... the clock should not be poly, but the interval parameter should result from a poly sub-patch in witch there is one "data out" - set "as once", being wired from somewhere in the calculated poly subpatch part => x data -> only one data out It's a big patch...

GDLive

Hello, I've been experiencing troubles with my patch. I wanted to use a value from a data out of a subpatch. This subpatch is polyphonic, I have a treatment being done x times. I want to reply one value peeked inside this treatment as a data out. Since I need only one value and this value is the sam...

GDLive

I think most constraints come from being a portable application, what is very appreciable when we work with more than one computers. In this case, it is very important to have separate folders on each release.
My be the compromise could be improved but I think it explains the difficulties :rolleyes:

GDLive

oui, driver de comm série spécifique (pour pouvoir dialoguer au bon débit), plus midi yoke par ex pour capter le port série

Ceci dit, le cable usb n'est nécessaire que pour la prog ou l'alimentation (si pas de pile)

GDLive

Y a tonne d'articles sur le web. Je fais ça avec un montage maison tout basique ; une seule résistance de 220 ohm nécessaire : http://itp.nyu.edu/physcomp/Labs/MIDIOutput => câble midi Pour un midi in c'est jute un poil plus compliqué (isolation nécessaire): http://www.arduino.cc/cgi-bin/yabb2/YaBB....

GDLive

D'accord, ça peut optimiser, mais vu la complexité de développer une comm spécifique et de ne pas pouvoir utiliser les fonctions de base midi learn sur n'importe quel bouton uSine, je trouve la quantité de développement un peu cher payé, vu que de toute façon il y a de la prog dans l'arduino. Le mid...

GDLive

J'utilise une arduino pour dialoguer en midi avec usine, l'ajout d'une simple carte arduino/fille ethernet doit permettre de dialoguer en OSC avec Usine ; quel serait l'avantage d'un module "Usine" pour Arduino ? L'avantage d'arduino est de câbler les capteurs que l'on souhaite et les gérer selon so...

GDLive

Nice concept ! I not sure I'll have enough time to compete, but love this challenge

GDLive

Salut bcjbn, Je ne sais pas si on a la même config, j'ai (entre autres) le rack hoontech "adc dac 2000" avec les mêmes drivers. Pas de problème pour faire fonctionner ma hoontech DSP 24 avec usine Par contre, un seul plantage du logiciel client Asio et il faut rebooter l'ordi pour accéder à l'Asio =...

GDLive

OK, I received an explanation by the boss himself : The problem is the result off my bad comprehension of the circular buffer technology. Even if the playing time is smaller than the recording buffer size, using circular buffer could not give the answer. In fact, I've to create/pilote my own buffer ...

GDLive

And the sound extract :

http://www.sensomusic.com/forums/uploads.php?file=crouc_1-track-3.zip

(wav.zip)

edit : precisions about the link

GDLive

Hello !! I have been trying for two weekends to have a patch working. Whatever I do, I have some crackles using this patch. I post here a simplified version (audio in is continuous oscillator, fade in and fade out to avoid beginning and final audio clic ). With this version, I'm joining an audio exc...

GDLive

Thank you for the fix !
My Dell laptop hp didn't resist to this two weeks ago.. I'll have to use the warranty :/

GDLive

Des nouvelles sur ce point ? :rolleyes:

GDLive

Awesome, very good work, headphoner !

GDLive

Oui, il me semblerait normal d'avoir le même fonctionnement qu'en mode grid (et ça m'arrangerait

)

GDLive

Yep,

Here is it :

http://www.sensomusic.com/forums/uploads.php?file=ExportPourNay.zip

nb : en fait, la piste passe en stéréo dès lors qu'elle est paramétrée en mode All ou Rack, pas en mode grid

GDLive

Canaux audio => oui, mais en une seule sortie stéréo : out 1 avec out 1 L et out 2 R

Master section => ok je viens de comprendre ; cette section est indépendante des workspaces !!! Tout s'explique (je ne voyais pas pourquoi parfois je la mettais, puis avec le même workspace elle n'y était plus...)

GDLive

Bonjour, J'ai la difficulté suivante : - ma prise sonore (parfois mono, parfois stéréo - dépend de la prise de son) est toujours dirigée vers un bus audio mono que j'utilise ensuite dans tous mes patchs. - j'ai donc des pistes d'effets, composés de patchs qui traitent ce signal mono (provenant du bu...

GDLive

thx Nay, me too

J'ai pas mal d'outils à ranger et de nettoyage à faire avant....

GDLive

Rah, ça y est ! Je ne résiste pas à vous annoncer la bonne nouvelle : la colle est sèche, les ajustements effectués, les soudures réalisées et testées ! (C'est hors sujet, mais ça explique pourquoi j'ai pas passé trop de temps à la programmation ces derniers temps :cool:) http://www.sensomusic.com/f...

GDLive

Ok, alors je ferai une vérif après avoir fait une mise à jour, (après demain ? - je suis en train de finaliser une autre "grande" évolution (j'attends que la colle sèche), côté instrument - +7 signaux supplémentaires sur la clarinette basse[dont le joystick !!] - je n'ai pas envie de retarder mes pr...

GDLive

Ton patch est très peu différent du mien ; sauf que ton tableau est dans le sub patch. Le tien fonctionne, le mien non !

exemple.pat

On constate en fonctionnement que les valeurs de couleur dans le sub patch sont différentes de celles sélectionnées dans le tableau

GDLive

ps : j'ai plusieurs versions de retard, je ne saute pas sur les mises à jour tant que ça fonctionne, si il y a réellement un truc bizarre qui ne vient pas de moi, peut-être que ce comportement a été corrigé entre temps => si ça a une chance d'être ça, n'y passons pas trop d'énergie :rolleyes: le tem...

GDLive

La sortie de mon GetArrValue (value) affiche des valeurs correctes. Donc je ne pense pas que le pb vienne de là.
Je ne vois pas de paramètre "max" dans l'EditArr qui me sert d'entrée pour mon tableau

GDLive

Par contre, quand j'entre mes valeurs de couleur depuis un array vers le color(in) du sub patch set color, celui-ci me tronque systématiquement le dernier chiffre et règle donc une couleur incorrecte : => 144764 -> 14476 => 1005061 -> 100506 Les couleurs sont un type de variable particulière ? y a t...

GDLive

Normally, you can change the caption color with the sub patch "set color" (no caption in the example => switch to prm to the ball for ex.)

nb : The patch has to be active on usine's engine on

GDLive

Thanks a lot !

GDLive

Tip top ! Ça marche en 5 min !
(Le temps de comprendre qu'il fallait que le moteur d'uSine tourne pour que les changements soient visibles...

)

Génial, merci bcp Olivier !!

GDLive

Merci de ta réponse, je vais laisser au chaud alors en attendant la révélation ou l’opiniâtreté nécessaire !

GDLive

Bonjour,

Ça doit être tout bête, mais je tourne autour :

=> je souhaite modifier la couleur de la "ball" d'un "XY pad" en fonction d'un événement

(si variable = 1, couleur de la balle rouge, jaune sinon..)

Comment qu'on fait ? Faut passer par des scripts ? J'ai jamais fait cela

GDLive

Hi CCQ, Your descriptions looks very interesting. What I understood is that your request aims to create a random live based on a structured composition. That's my actuel goal too, even if I plan to play with my instrument and catch some live sounds ; my movements should be recorded by embedded imu a...

GDLive

Not in the menu, but probably on the top of the sub patch editing window

GDLive

News from this project.... :

http://networkedblogs.com/klLDY

ça avance, ça avance !!!

(it groes it groes

)

GDLive

I understand the concept, which looks interesting, but I think that the video doesn't show clearly the interactions between dance and music. May be since this is only a stereo track ?
Needs to be seen in a true exhibition

GDLive

J'avais bien un keeponplaying stereo dans le tuyau, mais il est resté à l'état de friche.. D'autant que prioritairement, faudrait bosser sur le fonctionnement des rampes en les remplaçant par le nouveau module (pour tenir compte des évolutions d'usine). Ceci dit, le fonctionnement des nouvelles ramp...

GDLive

Ouaff...:rolleyes:

GDLive

Bon, j'ai potassé le chapitre 4.4 du Getting Started => effectivement, en paramétrant les checkbox de la partie snapshots, il est possible de dire que c'est le maître seul qui est "recall by midi" => et du coup on peut changer de preset avec un midi ctrl change (par contre sur all, pas sur la canal ...

GDLive

Salut Nay, J'ai trouvé function, et effectivement il y a un pavé qui me semble lié : Snapshot => store by parent / recall by parent, Recall by midi... Par contre, je n'ai pas trouvé de ID for files ! Pour mes tests, j'utilise comme ensemble, par ex le vocoder "classics vocoder" dans Ensemble/Classic...

GDLive

Bonjour, Un appel aux utilisateurs de Reaktor.. Bon ben voilà la problématique, comment rappeler un réglage donné sur un VST Reaktor composé d'un ensemble ? J'ai essayé avec le "preset manager", mais lui me ramène carrément des instances différentes de l'ensemble Reaktor (avec warning de sauvegarde ...

GDLive

some frequency analysis to modulate the timbre ?

GDLive

Welcome Capitan !

Trying it means accepting it

GDLive

Like some sounds and esthetics of the second one too !
I think you could have an ear at Judikael Mauffret, a friend of mine, who works with electrical clic and cracks.., since some research looks similar ! (but he isn't on Usine)

GDLive

looks great ! didn't had time to follow the development process, but I hope I will soon have time to try it ! The description of this patch looks useful for live bass clarinet !

GDLive

ouff, lot of questions here ! :) I will soon write a project description, then I won't go to much in details here. waolelaid : you'll be able to act on usine by moving the clarinet or some keys of it you're right, it's my goal. More precisely, I want to do this while playing, then I haven't so much ...

GDLive

Accelerometers + gyroscopes wireless + midi converting thru Usine :) http://www.youtube.com/watch?v=oyPpKM8e5Sg (sorry for the bad video, it's just to show where I am) Avec une somme de petits pas, on fait un long trajet... Next steps for my Augmented Bass Clarinet project, - embedded on my bass cla...

GDLive

Not wiimote, but I think this could be the next easy multitouch tool !!

http://www.youtube.com/watch?v=tlLschoMhuE&feature=player_embedded#at=26

GDLive

Since there are existing products for vj, my opinion is that Usine video functions should focus on using video as input. I'm not using such software but I think linking with vj softwares could be done via osc ? Working on complementarity could be more efficient than trying to do all functions in Usi...

GDLive

Tu fais bien de dire "soi-disant"...

(appologise for my answer, I'm not sure it's so usefull to reproduce the Mac vs PC discussion here... but it is not easy to let this idea without responses) :rolleyes:

GDLive

more efficient than redbull

GDLive

Having googled a lot since saturday... I post a link witch is about wireless midi Bjorn, you should have a look here to, because it talks about a driver who seems to directly transform serial port into midi device : :D http://www.ladyada.net/make/xbee/midibee.html I haven't tested since I haven't ar...

GDLive

Thanks very much for all these precisions.

I will have a look at the different solutions, but bjorn's one may be nice for me

GDLive

but most of projects are midi ones, so no particular problem with Usine..? I didn't find midi out device or developments , which could help to get directly in Usine. In most cases, as say headphoner, people use additional software to get arduino variables. I don't really want to run another soft on...

GDLive

2 years after...

Is there any progress linking arduino parts and Usine ? Is this project down ?

GDLive

Hi,

Seem's we need the PhaseVocoderInv.usr and PhaseVocoderForw.usr files to ? :/

GDLive

EDIT version 1.1 :

New Manual Loop Length mode to manually specify the end of the recorded sample as requested by Plaf in AF. Done by replacing count millisecond timer with a custom one.

GDLive

Very disappointing. May be there is some commercial goal with this illegal upload

Just thinking : if someone uploaded the pro-version, he should have access on gold member section so what difference with add-ons ?:(...

GDLive

woodslanding is right, I suggest all 32 bits xp users to use the /userva value to avoid pbs. I did it a year ago for my sequencer, and everything goes well with this tip. There is another tip I did to use unused RAM : virtual drive with swap memory on this drive... Sounds great but I recognise I had...

GDLive

thanks for the comments. Nay, I'll have a look at your method for video capture. If anyone else has other proposals, don't hesitate to mention.
I've to travel to Marseille now

see you Tuesday next week !

Gilles

GDLive

Thank's Nay.. Recording sound + video was much much much difficult than playing, I spent more than one day long to produce a video with correct sound and correct video. I used camstudio, a sampler in usine to produce the wav file (I don't understand why, but files directly generated thru the usine g...

GDLive

Just to tell you that I've uploaded this patch. You can show two examples here : http://www.youtube.com/watch?v=pcG0l2md5Ys http://www.youtube.com/watch?v=UOXhtqtRIYY Easy to use patch to catch the sound off a mono audio sound (designed for my bass clarinet) and loop this identical sound for awhile....

GDLive

Nice, easiest use with this version !

Welcome to %s forums

Search found 134 matches

Login • Register