Welcome to %s forums

Ariajazz

Thank for your reply. Your patch was very helpful. I didn't know about the PASS CHANGE module. I had to do some modifications to suit my needs, but it just works fine. Thanks again. I'm not impatient... some times it is a matter of hurry. I do have a musical presentation tonight. Now I can do it as ...

Ariajazz

Hi all. I'm stuck with my project because this issue. Does any one have a solution?

Ariajazz

I'm working on a workspace for controlling a keyboard that accepts midi messages. The idea is to change parameters and patches of the keyboard using HH presets. Everythig is working fine except midi messages (PROGRAM CHANGE) are not stored, I guess, in PRESET MANAGER. It does not send the midi messa...

Ariajazz

Thanks Oli for your reply. You always willing to help. Your explanation is very helpful, I learned many things from it. However I found an easier way to achieve what I was looking for using TRACE MIDI, GET TRACE and TEX PANEL modules.

Ariajazz

Any one?

Ariajazz

Any one?

Ariajazz

Hi all. After tried many procedures I have not achieved it. Show in Top Header MIDI messages sent. I.m using HH3 on a tablet which is only 32 bit. (x86)

Thanks in advance

Ariajazz

Thanks for your reply... I get the idea but it doesn't work for me. All the audio sources are in the same patch

Ariajazz

Thank you...It seems to be working

Ariajazz

180 views and no replies. where are the experts of this forum?

Ariajazz

Hello. 198 views and no replies. This seems to be an easy issue to solve... I just don't know how to do it properly. Where are the experts of this forum?

Ariajazz

No one?

Ariajazz

Any one?

Ariajazz

Hi all. I have several audio sampler modules working together playing audio files. They are comanded by a single PLAY button. They sometimes get out of sync. I need them to work in perfect sync, PLAY-STOP, cursor position, etc. I know there's a way to sync them together but I don't know how to do it...

Ariajazz

Hi all. Simple... Is there any module that allows you to SOLO and MUTE different audio sources that go to the main output?

Ariajazz

Thanks for you reply... problem solved

Ariajazz

No one?

Ariajazz

Hi all. I'm trying to built a Drum machine which will play different style patterns. I intend to use EZDRUMMER as the sound module and piano roll or grid to trigger the files. My question, how do I load midi pattern file either to the piano roll module or to the grid. The midi files are type 0.

Ariajazz

No one?

Ariajazz

Hi all. Is there any way to display HH vertically and not landscape? The way you were looking to a phone.

Ariajazz

Hi all, does anyone have an idea on how to create a promter for a singer in HH. It has to be HH3 because it will be running in a 32bit windows tablet.

Ariajazz

Hello. Thaks all for your replies. I did find a solutios usig the SELECT module. AUDIO MATRIX module using arrays is also a great one. Unfortunately I don't know much about using array althogh I understand the example given by oli_lab. I wish I could learn more about using arrays which I know is a g...

Ariajazz

Hello grego mondo. I do undestand the patch and hjow it works. What is hapening is that preset manager does not recall each preset for the given SONG selected by the pop up, it only obeys and works properly for the FIRST song at which are assigned the initial presets. When switching to the other son...

Ariajazz

Hi senso... That's what I've noticed. I still wonder why AUTO RECOGNIZE function behaves that way. I untick it and when I run HH again appears ticked. Acording to another thread about this same matter, I believe it Was SylvainT who stated that in his side is working fine. It would be fine if this co...

Ariajazz

"Yes, at first that's what I suposed it would do but it does not work, the preset manager simply does mothing when choosing presets, does not recall the presets saved" You just have to choose the target of the preset manager : current patch (that's the actual state but there's nothing to save in th...

Ariajazz

SylvainT wrote: ↑
10 Nov 2023, 11:09
Hello

Strange, works fine on my end.
Which OS ? Which version ?

Sylvain

WINDOWS 11. I haven't tried this project in WIN 10 which is my main music computer.

Ariajazz

Thaks Senso for your reply... Something weird is happening with Auo-recognize function, I uncheck it to turn it OFF but when I quit HH and launch it again it appears ON again. Why?
This forced me to use X and Y positions for each item to keep them in place, this not very functional.

Ariajazz

Hi all. A simple question: Is the toolbox configuration, settings and what is inside saved in each workspace?

Ariajazz

Thanks SylvainT for your reply.

"Then you juste have to load a specific file to change your BANK"

What do you mean by that, cab you be a bit more explanatory?

Ariajazz

Well the combo box let you choose wich song and then you have one different preset manager per song... Isn't that what you wanted ? Yes, at first that's what I suposed it would do but it does not work, the preset manager simply does mothing when choosing presets, does not recall the presets saved.

Ariajazz

Hi grego mondo, thaks for replying and for the patch which I checked. It does not do what I want and really don't understand how it works. I will be tweaking it and see if I can find some results. Thanks again for your help.

Ariajazz

I'm not sure on what you mean. The ideal situation would be one preset module to select songs and another preset module to select presets or scenes. Hereis where I'm stuck. Could you show an example please?

Ariajazz

Hi rigsbt. Thanks for replying. My project is a sort of a guitar efects pedalboard. In some hardware units you can find a BANK MODE where you can select from different banks that contain several presets. BANKS are used as SONG select and each song can contain several presets that act as SCENES. That...

Ariajazz

Hi all. Is there any way to build a patch or subpatch that will allow to have BANKS with several PRESETS within each bank tha way old USINE used to have? I have tried with two PRESET MANAGER modules but haven't got satisfactory results

Ariajazz

No one?

Ariajazz

Hello. I have not been able to determine which VST plugin is causing this issue. I have severa plugins in the project and tested the all in different situations, one by one and combined and the results are not clear at this point. It seems that the issue appears when several of the plugings are work...

Ariajazz

Hi all. Objects in TOP HEADER don't stay in place after shutting down and running HH again, even when AUTO REORGANIZE is unchecked. Actually it appears checked again when HH is rebooted. What is happening?

Ariajazz

Hi all. I'm using HH5 latest version. I've reported this issue before and it has not been fixed. HH5 does not shut down properly, HH5 icon remains in the task bar after the program is closed. Sometimes it blocks the audio driver, some others it does not but the icon remains in the task bar forcing m...

Ariajazz

Hello. Thanks all for your help. Rack calculation mode is set in SERIE so it is suposed to work correctly and as desired. I will be doing some testing and adjustments then I will share the project soon.

Thanks again.

Ariajazz

Hi joffo78, thanks for replying. Attached are images of how the each patch and the rack are built. I understand that each VST has to have AUDIO IN and AUDIO OUT modules to transmit audio. Every patch has a different audio VST and every VST has the same AUDIO IN and AUDIO OUT modules as seen in the i...

Ariajazz

Hi all. I'm working on a project that has several racks, each rack has four patches that contain one VST plugin on each. I'm not sure how these patches transmit audio signal among them. In theory a rack is what it is in real life, it is suposed to flow the audio signal among all patches in SERIES un...

Ariajazz

Thanks for replying. Just one thing : The audio buses are stereo.

Ariajazz

Hi all. I'm looking for a module that does the opposite effect of the AUDIO MIX DISPATCH module. The idea is to get different audio signals from different audio buses in the input and be able to select which one will go to only one output. It is a sort of a mixer but only selecting the audio sources...

Ariajazz

Thanks a lot for the information and link.

Ariajazz

Forgive my ignorance... What is BWF?

Ariajazz

What I do is save a preset file created by a preset manager module associated with the sampler player within the same patch . This preset file contains the markers and any other informamtion contained in the patch. Then I load both the audio file into the sampler and recall or read the saved preset ...

Ariajazz

HAPPY BIRTHDAY HH

Ariajazz

I'm also experiencing ASIO drivers issues with latest version. Freezes and crashes when loading and managing inputs and outputs of sound card, long interruptions of audio (several seconds) like if audio engine is overloaded. Older versions of HH work fine, also all other musical softwares have no pr...

Ariajazz

Latest beta version 5.2.221018 does no shut donw properly. Certainly it does it faster than previous versions of HH but an icon remains in the Windows task bar forcing to use the Window task manager to complety close it. In Windows task manager HH appears as "not responding". I have tested in three ...

Ariajazz

X.iso. As you asked, I do only expose what is necessary from the VSTs and actually I manipulate their parameters directly from the VSTs GUI. I do no deal with VSTs internal presets, at least when audio is playing. My workspaces are quite complex and involve some patch on/off modules. Recently I disc...

Ariajazz

Hi x.iso. Thanks for replying. I think you did told abouth that I while ago. I've done it and have disable all modules that dont'n need to be chaging it status when a pesets ar recalled by unchecking "save in preset" options in those modules. I've done many tests having only Usine modules and others...

Ariajazz

The purpose of the post is to check if someone else is experiencing these issues and if any solutions have been found. I thought about sending a bug report first but then decided to share this information with the Usine community to get some opinions. Don't get me wrong, Usine is an amazing software...

Ariajazz

Hi all. I decided to open this thread in order to explain some serious problems that I've found in Usine Hollyhock which, by the way, is an awesome piece of software, unique in its kind. I've been an USINE user for 10+ years since the old v5.20. I have posted some of these problems before in this fo...

Ariajazz

Thanks Sylvain for your repply. I am aware of that factor. The samples (tracks) played are recorded midiwise, so every track has its own specific perfect tempo, I think it woud be easely done. I do not understand the following: "If you plug the sampler pos*duration/1000 to ppQpos, your pianoroll wil...

Ariajazz

Hi all, How do I put the sampler player and the midi piano roll in sync?, I believe is done using SMPTE. I tried using "pos" and "ppQP" in both master and slave modes and it did not work, most probably is that I don't know how to do it correctly. Any help wil be appreciated.

Ariajazz

Hi all. My project loads workspaces that represent songs, Each workspace (containing several racks and patches) is a different song with its own settings and controls that are displayed in the IB view. When a workspace is loaded it does it fine but the RACK view is displayed instead of the IB one. I...

Ariajazz

Thanks rigsbt for the tip. Now i know how to do it.

Ariajazz

I reinstalled FTDI drivers and the problem persists. I doubt it is an USB driver related issue since it is presen in two computers and the error message is displayed in both of them. Non of the DMX interface setup parameters are shown in any of the PC computers.

Ariajazz

thaks Senso for your reply. I don't know why FTDI drivers could be corrupted. I do not have an ArtNet device. The issue is shown in two defferent computers with WI 10 and WIN 11 Os respectively and the eerror message appears in both of them: create procedure failed in: device DMX I'll try reinstalli...

Ariajazz

Thanks Joffo78 for replying. Yes, i've tested many times and the error message appears even with no interface connected every time HH starts. I downloaded a fresh copy of HH to discard any bug and the erroris still there. Too bad and sad, I do have some light fixtures that want to put in use. As sai...

Ariajazz

Hello. Anyone has an idea why is this happening?

Ariajazz

Hello. As stated before, non of the DMX configuration parameters appear in setup light tab as shown in Gisolrnette attached pdf. Instead this is what I have: DMX.jpg I'm using an uDMX 512 interface, driver is installed and the device is being recognized and working by both FREESTYLER and QLC Lightin...

Ariajazz

Thanks for you help. I will test it later on and let you know the results.

Ariajazz

Hello again. I'm starting to explore the DMX features of HH5. It gets my attention that I do not see any parameters for DMX in the setup light tab as stated in the manual and seen in previous versions of HH: https://www.brainmodular.com/manuals/hh5/en/setup/setup-panel-tab-light How is this done. It...

Ariajazz

After some modifications and tweaking the patch did its job. Now I'm able to considerably expand the capabilities of my Behringer X-TOUCH MINI external midi controller. Thanks a lot for your help.

Ariajazz

Thanks Senso for the patch. I will try it ans see if is works for my needs.

Ariajazz

Anyone has an idea on how to do this?

Ariajazz

I tried panel image and did not find a way to load the images. How do you do it?

Ariajazz

Thaks Senso for your reply. Good news, looking foward for that path example.

Ariajazz

Probably best if knobs have a endless control mode maybe with default control values. But best to make the UP and DOWN values configurable so they can be any values. Also, how do endless controllers send a initial value, or do they always start from zero and send lots of UPs to get to the start val...

Ariajazz

Hello again. The question is simple. How do I get a switch to receive cc midi messages from any midi channel (OMNI mode)?

Ariajazz

I'm having the same problem with rotary endless encoders using BEHRINGER X-TOUCH MINI. In HH5 it works very unaccurate, sometimes with big jumps in values, and others with very little movement. This external controller has 3 relative modes to choose from, I do not know exactly what the differences a...

Ariajazz

Found a solution, Resizing and repositioning both the image player and the image did the trick. Thanks anyway for you help.

Ariajazz

Thanks rigsbt for you reply. I initially tried these modules with no success. After a litlle tweaking I got "video image plager" working. The only problem is that I cannot ajust the image size on the player, cosidering I'm using a 7.5 inch display I need the image to be shown almost at full screen s...

Ariajazz

Hello. Is there any way to display or open an image (jpg, png, etc.) from Usine?. I want to display on the screen an image (when need it) that graphically shows all the midi assignments and functions of an external midi controller. It would be nice if it could perform as a slide show, selecting from...

Ariajazz

This is what I did. I placed a large button in IB (or wherever you want) attached to a create midi module which sends cc midi message to Usine's panic button via lear midi command.

Ariajazz

Hi all. i do have a container that I want to change its background color according to a listbox setting number. This is: if setting (1) is selected the container is one specific color, lets say green, and if listbox setting is (2) container will turn red. I've never done this before so have no idea ...

Ariajazz

Thanks Senso for the tip, I didn't know that. Rigsbt, I'll be testing you suggestion right away.

Ariajazz

Hello guys, This is something I've done many times before using "pass if changed" modules but now is not working properly. When I press switch (1) the other (2) turns on but the pressed one (1) turns off after a fraction of a second. I attach the way I do it. Am I doing something wrong?

Ariajazz

Hi all. What are the minimum CPU system requierements on both Windows and OSX for a smooth real time (lowest latency posible) usage of HH5?. Processor speed, RAM, etc. Woul be possible to run HH5 on a tablet?

Ariajazz

Audio processing is indivisible, it is not possible to split one audio signal into two or more threads. Using audio buses you can distribute VST's CPU load to several cores and aliviate the high CPU usage. HH architecture manages tasks in a multicore structure by racks. As Senso mentioned. you might...

Ariajazz

I do have a generic USB-DMX (not ENTEC) interface that haven't tried in HH5. I assume that if I use it I have to install the propper driver. Thnks for the tip.

Ariajazz

This is an error message that has been appearing from several previous versions and current one when Usine starts. It is a minor issue that does not affect Usine's overall functioning but is kind of annoying, I wonder if there is away to fix this.

Ariajazz

Thanks Senso. So far the tweak seem to be working.

Ariajazz

Any improvement on this?

Ariajazz

No one?

Ariajazz

Hello All. Previous version did it. Usine was able to keep the selected position of VSTs. Now when you open them they do it at a specific XY cordinates of the screen and not at the selected position. For me this is kind of an issue because with previous versions of HH I could open several VST GUIs e...

Ariajazz

How does HH5 behave under this OS?

Ariajazz

Hi Senso, thanks for replying. I figured out how to do it. I do have a guitar multieffect pedal that has USB capabilities and wanted to feed audio from it to HH through USB. Actually the pedal acts as an USB audio interface (and some other control things). HH detects the interfece when it is pluged....

Ariajazz

No one?

Ariajazz

Hello. Happy New Year 2022 to all of you guys, Does anyone know how to implement an audio USB input?. To be honest I haven't mess with HH to figure out how to do it, it is kind of early here and it is holyday. Is there any special setting for doing so?

Ariajazz

Hi Simon, thanks for replying. I will take all you said in cosideration, will perform some more testing and let you know about the results. My PC is powerful enogh to perform fine with no artifacts due to CPU hog. The plugin used is Overloud TH-U which is the lowest CPU usage of his kind. The issue ...

Ariajazz

Anyone?

Ariajazz

Hi Senso, Thanks for replying. In my workspace configuration Preset Manager is not managing or dealing with plugin presets internally, i other words PM is not executing any preset change within plugins, it is only recalling "scenes" in the workspace such as switches, knobs and other control modules....

Ariajazz

Althoug Preset Manager is faster in Usine v5 it is causing an interruption of audio when recalling presets. In some cases it completely silences audio for a fraction of a second or with a click or pop noise and in other cases it just decreases the volume of the audio for that fraction of time. I hav...

Ariajazz

senso wrote: ↑
02 Dec 2021, 08:42
2021-12-02_084016.png

right-click in an empty zone of the wkp

Ariajazz

New preset manager with BANK and PATCH capabilities the way the old CONDUCTOR was.

Ariajazz

USINE is a UNIQUE piece of software, there is nothing like this in the market. With Usine you can build and customize your "music machine" as you wish. There are literally thousands of plugins out there you can use inside Usine as a host.

Ariajazz

Any one?

Ariajazz

Ok. This is the thing, I do recall worksapaces using the load workspace module. Each workspace represents a song from a setlist and they are listed on a list box module so when I select a song from there the load workspace module loads the corresponding workspace for that song. The thing is that I h...

Ariajazz

Thanks Senso, I'll try it later on.

Ariajazz

Is there any way to display the current loaded workspace name on a text panel located in IB?

Ariajazz

I do have a Ryzen 3 2200G processor with Radeon Vega 8 graphics. Do I take any advantage from the Hardware Acceleration options in Global Setup of Usine HH5?

Ariajazz

Resizable Preset Manager?

Ariajazz

Microsoft just released a Win 11patch that corrects the issue with Ryzen processors. I do already have Win 11 on my laptop (i5) and it is working fine. I haven't upgraded to Win 11 on my music production PC yet, which is Ryzen 3 powered. I may wait a few months until more information is released abo...

Ariajazz

Checked with version 5.0.211007 just released and the problem has been solved.

Ariajazz

I built a Ryzen 3 machine a while ago and it is working fine and smooth with very low latency (64 samples). My workspaces are not too complex, 8 racks at the most with a bunch of VSTs and VSTIs. Latency relies not only on CPU speed but in the quality of the ASIO drivers.

Ariajazz

Using HH5 v5.0.211002, it does not mantain plugin's presets when loading a patch or a workspace. The plugins load but in a "blank" way (as if no preset were selected). The plugins' presets stored and saved do not appear. I don't know if this is a bug or not but I do notice HH5 different issues deali...

Ariajazz

Apparently the issue with NEBULA v3 plugin was corrected in version 5.0.211002. I'll keep on testing

Ariajazz

Thanks for replying. It did work, I always wondered why some plugins showed more than two (L&R) inputs. These extra inputs work as side chain inputs in some plugins. Thank you very much for your help.

Ariajazz

Hi all. I'm trying to do a match EQ curve of two different audio sources using FabFilter Pro Q3 equalizer. For this Pro Q3 needs to listen to the REFERENCE audio through a side chain input. In most DAWs you just create an AUX send to the plugin (Pro Q3) and it will recognize and listen that audio so...

Ariajazz

LogFile sent to support@brainmodular.com

Ariajazz

Hello. I started HH5 and loaded the workspace containing the patch twice without any problem. Third time did not load and freezed. Attached is lhe log file.

Ariajazz

Hello. All the plugins being used by Usine are installed and located in a dedicated VST folder (It has worked this way for years wiyhout any problem). All versions of Usine scan this folder searching for plugins (that's what I meant when I said that all versions of Usine share the same VST folder). ...

Ariajazz

I tested all the plugins in the patch and the one causing the problem is "Acustica Audio NEBULA v3" which I've been using for years in several DAWs and Usine versions without a single issue. Today I extensively tested this plugin in previous versions of Hollyhock (v3 and v4) and it loads fine. I per...

Ariajazz

I had a couple of freezes today loading the patch, I had to shut down Usine from Windos task manager.. The issue is a random thing.

Ariajazz

I could not be able to send a bug report. It seems that the page has been close. "contact & support" page does not open, 404 error appears instead. Look on the forum in the bug report subforum. There's a simple email address to send the report. Bug report subforum is locked. Did not find any email ...

Ariajazz

Here is the patch. I'm still checking it to fin a way to make it smaller or less complex.

Ariajazz

Hello, When you save a patch or a workspace with the version of Usine dated 210906 ans open it with an older version like 210802, this message appears. It's normal. In 99,9% of the time, there's no consequence. Sylvain I've seen this type of message many times before in other softwares, it warns yo...

Ariajazz

Hi cmodica. What do you mean by long fade between presets? Could you be more explanatory please?

Ariajazz

Hi... Thanks for replying. I initially built the patch with HH5 5.0.210802 then moved to version 5.0.210906 and rebuilt the patch. I tried to open the new patch with v5.0.210802 and received error message saying that the patch was created on a newer version of HH5 and could not be open with this ver...

Ariajazz

Hi all. Using free version of the new HH5. It freezes loading a complex patch, not always but most of the times, I would say more than 60%. Sometimes patch loads fine when is within a workspace and this is loaded. Some other times it just does not load at all and the whole program freezes forcing me...

Ariajazz

Hi. thanks for your reply. For the reverb is like using a reverb bus and send the dry signal to it. But wat about the the tail of a long release synth? I was thinking on using a milisecond counter that could turn the patch off after the tail fades and disappears completely. Could you please be more ...

Ariajazz

This is the situation. I have a Synth in a patch that is turned on and off by a preset manager. When the peset manger turns off the patch the tail of a synth or a reverb is cut abruptly. I would like to find a way to preserve that tail until it dissapears and then turn off the patch that contains th...

Ariajazz

Thank you very much for your help. I had to add another Pass if change module in between the know that goest to the plugin in order to work properly.

Ariajazz

Hi all. I do have several Usine knobs that control different parameters of a plugin (Guitar Rig 5). Different presets are stored in GR5 preset manager sytem. The thing is that when these presets are recalled within GR5 the knobs in Usine stay in the last position they were, in other words, they don'...

Ariajazz

Thank you Senso for your reply. It didn't work, not as desired. Actually it behavesin a strange manner. When Sampler play button is triggered piano roll stops and when piano roll plays sampler stops.

Ariajazz

Is there any way to have in sync sample player (wave player) with a piano roll? Play, stop and cursor position mostly.

Ariajazz

Hello. Sorry I'm bothering again. The "set off button B" worked fine but there is a little problem: Button A has to be clicked twice to turn on switch A again. This is an issue since this button A is intended to be engaged by a cc midi message and it will only happen once at a time. Any idea on how ...

Ariajazz

Thanks again for your help. I tried that before but thought it had to do with "TOOGLE" function in the switch. Now I get the idea about "SET ON and SET OFF" that were not present in old USINE v5 which I have use extensively.

Ariajazz

Hi rigsbt, thanks a lot for your help, the patch works like a charm but now I need a way to turn off switch B from a another button (a second one). I have try several things with no success.

Thank You.

Ariajazz

Hi all. I need a button that can perform the following task: When the button is clkicked once it engages (turns on) a switch A and when the same button is clicked for a second time turns off switch A and turns on switch B (a secondary one).

Thanks in advance.

Ariajazz

Certainly preset manager can store markers for different audio files. My poject has two preset managers that target workspace, the result is a complete mess because when one prset manager controls some settings, like in this case, markers, the other chews it up. I have to find a way to make both pre...

Ariajazz

SylvainT wrote: ↑
12 Oct 2020, 06:23
You can store markers in array and recall them with audio files.

Sylvain

How do I do that?. I have no idea on how to deal with arrays. Could you post an example please?

Ariajazz

Thank you. I just discovered this module... I missed it when I was searching for the solution. Thanks anyway

Ariajazz

Thanks a lot for your response. It did work but the thing is that the sampler contains several audio files in a list. How do I get different wave displays with different markers for each audio file in the sampler? The idea is to trigger midi internal messages that recall different presets for a song...

Ariajazz

Hi all. I need a module that when it receives an specific value, lets say "2" a "1" value is sent (switch style). If the value received does not mach the desired specific value "0" is sent. If been browsing math modules but I cannot find something tha could do the job. The idea is to activate an dea...

Ariajazz

Hi all. I've been using Usine for a while and always wondered about the array modules usability, I know they have great potential and functionality. However I have no idea on how to use them. No matter how much I search on the internet or Usine manuals I cannot find any information on how to use arr...

Ariajazz

¿¿¿¿ Any one????

Ariajazz

Thanks for your reply. Not really. The idea is to have a second waveform display in a popup window with all the functionallity of the sampler's one, I mean: cursor, markers, etc. The overall purpose (asked in another post) is to have a wave file loaded into sampler that sends midi messages every tim...

Ariajazz

Audio sampler - player only

Ariajazz

Trying to add a second waveform display to a sample player. I'm having trouble with this. I cannot achieve cursor movement on the second waveform display, nor showing of the markers of the player on the second display. I don't know what I'm doing wrong, Can someone show me the correct patching? Than...

Ariajazz

I have a wave file loaded in a sampler which has several markers. How do I achieve (if possible) that when the cursor reaches a marker a midi message is sent. Every marker has different midi message.

Thank You

Ariajazz

Thank you

Ariajazz

Hi all.

This probably has been asked before but I do not find any answer. How do I control a button from a switch?

Thanks.

Ariajazz

Thanks all for your replies. I'm getting all the ideas you've posted and trying to come out with a solution. I use Usine as a "pedalboard" for live guitar playing. I hanen't been able to use the grid for achieving my needs, actually I have not used it before and do not know its potential. Old coduct...

Ariajazz

No one else come with some ideas?

Ariajazz

Thanks for your response x.iso. I get your idea and certainly will check that out. However old USINE's conductor module has bank feature that new preset manager does not, and that is a very usable feature that totally fits my needs. As I said before, each bank is a song and each scene from the corre...

Ariajazz

It is not stupid. I have tried Hollyhock many times since version 1 and its preset manager takes about 1 second and sometimes more to make the changes over the workspace. Not suitable for live situations. The old USINE's conductor is instant. What I want from you guys is a solution not and sterile c...

Ariajazz

Hi all. I know this can sound weird after almost four versoions of HOLLYHOCK but this what is working for me. I'm using USINE STAGE v5.8 and implementing the conductor module as a preset controller for a workspace this way: Each bank of the conductor its a song and each escene of a given bank is a p...

Ariajazz

It currently takes around 1 second (sometimes even more) to recall a stored preset. It would be great if it could be as fast as the old CONDUCTOR module from v5.

Ariajazz

Thanks for replying X.ISO. I'm not using the grid. My project is mainly for playing guitar live, lets say it is a sort of a pedalboard with many capabilities. As I stated bebore the first preset manager (1) is for selecting songs that have their own effects configuration. The second preset manager (...

Ariajazz

Hi guys. I have two preset managers in the same patch and workspace. One is for selecting songs and and their chracteristics. The other is to turn on and off different plugins that affect the selected song. How can I make them to work independently not affecting eachother, they're both working and a...

Ariajazz

If driver is NOT DIGITAL SIGNED for using with Microsoft, WIN 7 won't allow it to work, even if the driver seems to be installed. That's why the device does no appear in Device Manager.

Ariajazz

The question is simple. How does HH3 takes advantage multicore processing?. In other words, How it distributes the workload through the different cores of a CPu, in this case an AMD Ryzen 3 2200g ( 3.5 Ghz. 4 cores).

Thanks.

Ariajazz

Thanks all for replying. Joffo's patch worked with some modifications I did. I'm not good working with arrays so the other alternatives were not useful. Thanks again.

Ariajazz

Hi all. Sorry but I haven't found a way to do it... I need a sort of dispatcher module that sends "1" value as a switch to the selected output and "0" to the rest of outputs. I know how to do it with switches grouped but in this case the selection is made by a set of numbers 1 to 16, the way a dispa...

Ariajazz

Thanks Nayseven and Joffo for your effort. Joffo's patch did work perfectly, the issue was at the input busses for the stomps. I came with my own version adding another stomp instance to make them six (6)) to fit my pedal controller. Nice add-on, I learned new things from it. Now I want to be more a...

Ariajazz

OK Your patch and everything I've tried did not work. It happens the same in all cases. all the stomps receive signal but only through bus1, there's no change in buses when you move the boxes. The issue has to do with the track based desing of the add-on. We defenitely need Joffo's help.

Ariajazz

I've come with this so far:

http://www.sensomusic.org/forums/upload ... e=exp2.pat

Ariajazz

That is exactly the problem, the additional track number inputs. I've been doing some experimentation by adding additional outputs to every and each stomp and assign them to the mentioned additional inputs but nothing seems to work. We definitely need Joffo's help.

Ariajazz

Finally I could upload joffo78's add-on. Here it is

http://www.sensomusic.org/forums/upload ... arrack.wkp

Ariajazz

Hi all, especially to joffo78. Today I found a very interesting add-on for Usine v5 made by joffo78 and it is exactly what I was looking for. It works very nice but it has a problem for me: all the effects are placed in different separated tracks. I wonder if there's a way to place all the effects (...

Ariajazz

Sorry for the inconvenience, I should have mentioned it before. HH does not work for me, in despite of that I know it is more advanced and powerful many things have changed from v5 and I have too many patches and workspaces that would be a nightmare to adapt to HH, I have given it a try and ... no w...

Ariajazz

Thanks a lot for your help. Two problems though: 1) I'm using USINE STAGE v5. It does not support SAVE WORKSPACE in IML modules. 2) I have no idea on how to use scripts, how to execute or run them. All I have achieved is to access the (Shift+Ctrl+S) save workspace command by using a plugin inside US...

Ariajazz

Thanks a lot for replying. That is exactly what I was looking for, however it does work for everything I've tried except for c:windowssystem32osk.exe... weird... I just replaced the osk.exe with a third party on screen keyboard app and it is working fine. What I need now ia a way to "force" SAVE WOR...

Ariajazz

Hi all.

Is there any patch or script that allows to run (open) an external application or a windows function from within USINE?. In my case I need to be able to run an on screen keyboard, either the Windows one or any other 3rd party. This is to be able to type some information to USINE.

Thanks.

Ariajazz

Sorry for the inconvenience, I reviewed my work and I was patching erroneously 1 to 0 and 0 to 1 DO WORK. I appologize. Thanks to all.

Ariajazz

I NEED HELP WITH THIS PLEASE

Ariajazz

Thanks Nay-seven for replying. I have a function that employs a milisecond counter, as far as I know the counter's START is activated by a button not a switch. I need to be able to start it by a switch, that's why I thought that triggering a button with the press of the switch could work but I don't...

Ariajazz

Ok guys sorry to tell you this but the "from 0 to 1 and/or 1 to 0" did not work for triggering a button with a switch, Any other ideas?. I'm stuck. Thanks all.

Ariajazz

THANK FOR REPLYING. It worked. What about the opposite - Trigger a switch by pressing of a button?, in other words: turn on a switch with a button

Ariajazz

Thaks all for replying

Ariajazz

Any other opinion?

Ariajazz

Thanks for replying. So I assume it wil load patches and workspaces much faster.

Ariajazz

Do Usine v5 and Hollyhock benefit from SSD? If so, how?

THANKS

Ariajazz

Hi all. I need a way to send a button message with a switch. In other words, trigger a button with a switch. I've tried everything I know and can imagine but don't get any satisfactory result.

Thanks.

Ariajazz

Thank you guys. 23fx23 solution worked perfectly.

Ariajazz

The idea is to have two switches that respond equally whether you press one or the other. One is placed in a container and the other is on IB. They interact with each other. I have tried many things with no luck.

Ariajazz

Hi, I need a way to convert a midi note message into an integer value (1,2,3...). Thanks in advance.

Ariajazz

Finnaly I've found a way to achieve this using NDC Midi Channeliser plugin. I created a patch on a separate track that listens to midi channel 11 (default in X-Touch Mini) from its own midi port through Usine's midi input 1 only. This patch allows me to select the midi channel that I want using seve...

Ariajazz

Thanks Gurologic for replying. I get the idea but I don't think X-Touch Mini has that feedback capability. This device works similar to Korg Nano Kontrol, you can only set their type of messages and channels with propietary editor. It seems that Usine only listens to the midi channel that is sent fr...

Ariajazz

Anyone?

Ariajazz

Hi guys. Working with USINE STAGE. This is the issue: I have a patch with several faders and knobs that control parameters of VST plugins. Due to limitations of a Behringer X-Touch Mini controller I need to make the faders and knobs respond to different midi channels. I need to find a way to switch ...

Ariajazz

Hi. That is...

Is there any list of DMX interfaces of supported by Hollyhock 3? Help files and manual only reffers to ENTEC. Is any other USB to DMX supported?

Ariajazz

Is there any way to do automation for knobs, faders and other elements in USINE v5?

Ariajazz

Messing around I found what apparently causes that strange behaviour of the.Knobs/faders, they cannot be attached to any other module, this is: the "display number" module was producing all the problem. I deleted it and found another way to display the value that does not interfere with the correct ...

Ariajazz

Thanks for replying. Absolute mode does not work for me. X Touch mini has no motorized controls only endless rotary encoders, buttons and one fader. i don't see how "on init" module can help

Ariajazz

Hi all. I'm having a very hard time getting Behringer X TOUCH MINI encoders to work properly. I have many faders and knobs that control output gain and other parameters in mi rig, they're are set from -80 to 12 dB limits. Lets say that I have a current value of -10dB which is the proper level for an...

Ariajazz

Ctrl+S keyrokes can be used but the thing is that keytrokes ia a Windows based function, not an internal USINE one. I've been trying to figure out a way to send such commad to USINE internally and not using any external tool such as BOME Midi Translator or MIDIOX with which it can be done.

Ariajazz

Tanks for your reply. I tested it in Hollyhock and cerainly works but I'm using USINE STAGE and it does not work there. I'm thinking that US does not support this command (worksapace saving) I'm also thinking about the idea of using scripts, but again, I have no idea on how to implement them so it w...

Ariajazz

Nobody?

Ariajazz

It does work for PATCH saving but not for WORKSPACE. What could be wrong?

Also tried with both .WKS and .WKP file extensions... no luck

Ariajazz

Thank You so much... I will try it later on...

Ariajazz

I'm trying to implement SEND INTERNAL MESSAGE module. What I want is pretty simple: Save Patch and save Workspace. Honestly I have no idea on how to do it with this module. Everything I've tried has been unsuccessful. Could anyone please explain how to use this module?. i have read the help files bu...

Ariajazz

Thank for the example but did not work. Popup still behaving weird positionwise

Ariajazz

Thanks for replying. I get the idea but not sure how to do it. Older versions of Usine did "remember" the position of popup windows and containers. Could you please be a little bit more explanatory on how to get it. BTW there's no way to set containers as stand alone in Hollyhock, the option it just...

Ariajazz

Popup window does not stay in place when reloading patch. No matter what I do, when I reload the patch popup window appears in another position and not centered in the display or in the position I want. What's wrong. Is there any way to set its position permanently?

Thanks.

Ariajazz

Thanks La Tenaille. Popup window solved the issue. In Usine stage popup windows are always on top and centered. How didn't I think about it? Maybe because I haven't use popup windows before. Thanks again.

Ariajazz

No one has a clue?

Welcome to %s forums

Search found 348 matches