Welcome to %s forums

grego mondo

The way I do in my workspace is : I use all midi learns to feed a big Gloabal Array and then, in each rack, I get the Global Array value(s) wich I need to control my faders and knob eg something like choosing in a combo box the first instrument : Tuba > all my faders are feeded from values 1 = volum...

grego mondo

Did some tests too over here : If you create a midi in device getting a midi bus (called "virtual" for eg) the midi learn goes the same way with no name but if you add the midi bus "virtual" to IN MIDI LAN & BRIDGE then it's learned with the name "MIDI LAN & BRIDGE" Then if you plug a real midi devi...

grego mondo

Sinon avec l'adat ...
Si tes cartes ont entrées & sortie adat tu peux utiliser les entrées/sorties de la seconde via les canaux adat de la première

grego mondo

Hello May be it's a good opportunitie to get involved with Arrays :-) I believe you can't really "faire l'impasse" on Arrays because it's such a powerfull tool ! There it looks you can get number of hands valids (> palms) recognized (1 or 2) From there you can know wich value of the Array you're int...

grego mondo

Opened in administrator mode
Rebooted

it Vanished ...

grego mondo

Hello I have his message opening Usine on my brand new computer with Win 11 25H2 (AMD Ryzen 9 9955HX 16-Core Processor) Usine HH6 6.0.251117: Usine.exe - Image incorrecte C:\Usine\Compagnies & projets divers\Light\Usine Win 6.0.251117 Mini Chime\Resources\Devices\DeviceMidi.5.240430.usr-win64 n'est ...

grego mondo

L'année dernière c'était super, j'imagine que ce sera encore mieux l'année prochaine

grego mondo

Oui c'était super

grego mondo

May be
If you save the program change value in a fader, you can use the fact that the preset "has change" to send it with a create midi message.

P.S. Don't forget to be as impatient for thanks than for answers

grego mondo

- "the idea was to get global array just when I load it" : that is what will happen if you tick th "add pass only if change" Am I right if I say that when I change value in my Editor > it change the global Array > so the value pass out of "get global array" ? - You have combobox that you use for dis...

grego mondo

Ha ha I didn't send my commented wkp yet
but I 'm working on it.

About your stuff for the wheels :
I was wondering about shutter how do you choose wich shutter you act on ?

grego mondo

cool ! - my global string trick allows for readable file and better compatibility if you'll need to add columns later on. +1 (that's a good point) - the pass module after the "global array get array" is not necessary as you can add paas if change inside that module. the idea was to get global array ...

grego mondo

I did this

with a simple global array

grego mondo

Thanks Oli

I couldn't remember that global array string trick.

It look like a bug because I tried creating an Array Editor with prefered values : save ok, loading give the same error message.

grego mondo

Hello

I use an Array Editor to make a scheduler for an installation.
10 lines & 13 columns

Works fine
I save my Array Editor to a file
when I load a file I get an Error message :
PROC:Loadfromfile
ERROR:List index out of bound (13)

grego mondo

Salut

Device panel > Video Out
Dans les propriétés de Vidéo Device Out tu as le choix de l'écran ciblé et le choix du plein écran dès le démarrage

Et alors une fois que c'est fait tu n'as pas besoin de pub, c'est chouette, non ?

grego mondo

In an other wkp I used an envellope follower witch have au vu meter output for a simple fader this one seems to work ok

grego mondo

C'est bon de savoir qu'on est pas seul.

Merci

grego mondo

Hello For the second time I have a workspace (playing for hours) that send the same error messages : E901 patch process E033 audio dropout Process Module name : control_vu_meter_horizontal It worked fine for hours and suddenly start to send those error messages. Recreate modules didn't worked. I had...

grego mondo

Hello, welcome !! What kind of background or knowledge helped you understand Usine? Lonelyness & time Did you come from audio programming, modular synths, scripting, or another field? I came from sound engineer & music, I was attracted with modular environement so I could build a friend (I'm touring...

grego mondo

Tu dois pouvoir appeler 2 états (pst) consécutifs au démarrage d'usine (l'idée du feedback étant denvoyer les changements)
Un pst zéro et un pst démarrage genre style façon

grego mondo

Yes I loaded it in a mac M4
But I'm not there (where the mac M4 belongs) anymore ...

grego mondo

Load all right

grego mondo

About Panel Editor Data As we can enter a color array for "cells color" I would like to be able to enter a color Array for "item font color" so I could enter 2 color Array, one Yellow and Red and one Black & White so I could read my text in black in the first (yellow) column and in white in the seco...

grego mondo

Et aussi le port ou ert ne doit pas être ouvert dans une autre appli

grego mondo

Nice, thanks.

I like the "already existing option" (this pst already exist so I won't save it)

I 've just discover "display line number" in the listbox options, can be usefull and save some brain

grego mondo

It's fun how we went in 2 differents directions I did it : 1 to replace Luminosus (also because it couldn't recognize 2 identical controllers, even if the had differents CC messages) 2 to add audio fonction to EOS but in my case, Usine was synced by EOS, not the opposite. I might merge your fonction...

grego mondo

Hello I didi a workspace for a project just for that Midi to EOS via OSC (40 faders) + sound analysis & "crépite fx" that can control fader or sub I didn't found yet time to comment it but it works ... I'll try to do that saturday while a train time also a Usine preset can be called by an EOS Cue In...

grego mondo

As long as the output of the rack is 8ch it will record 8 channels

even if it's patched like that inside (so you hear everything in L & R Channel

grego mondo

J'y ai pensé, tu imagine bien, nez en moins j'ai potentiellement 2 index (ou plus) simultanés ... J'ai un peu exploré les "array différence" et j'aurais sans doute pu faire un patch à 5 (en imaginant cela comme un max de simultanés) voix de polyphonies en entrant le résultat de "difference" comme un...

grego mondo

Merci Olivar Je communique avec Touch Designer et Untiy d'un coté je reçois un array de 90 valeurs qui m'indiquent l'etat de 90 zones (disons capteurs) et de l'autre je dois envoyer un même message /btn_on et le numéro de la zone qui est passé ON à Unity. Je nourris un GA avec mes valeurs reçues en ...

grego mondo

Merci J'envoyais bien un Array, c'était mon but. Je comprend donc que la fonction de ce module Global Data OSC est au contraire de "concater" 90 messages différents en un seul array et de le transformer un Global Array direct et c'est super !! J'avais compris qu'il transformait direct un array osc e...

grego mondo

Bonjour, salut Je viens de découvrir le global data osc Super sur le principe mais je cherche à comprendre pourquoi il m'"espace" mes valeur en nourrissant le GA j'ai (il me semble) bien commenté mon patch mais en gros Global Data OSC recoit bien les 90 (pour l'exemple) valeurs envoyées en osc mais ...

grego mondo

grego mondo

clever

grego mondo

Hello

thanks for the tip

Well it's more something of a deep subpatches

grego mondo

Here's my trick

when you don't let pass the "trig bypass" mapper won't update value

grego mondo

Pardon alors j'ai pas vu le message où tu disais que tu utilisais ta box comme routeur. Si tu utilises ta box comme routeur alors effectivement remets toi en 192.168.1. quelque chose pour pouvoir être sur le même réseau que ta box ( et passes donc ton node & ton grada en 192.168.1. n aussi ton masqu...

grego mondo

Hello all

I'm having an Array to change several mapping out values from a "mapper values" module
it looks like if the Array changes the mapper value won't use the new output values unless I trig his bypass (on & off)
Ever experienced that ?
Is it a bug or am I missing something ?

Take care

grego mondo

J'ajouterai quand même, pour la beauté du geste et le respect des traditions de l'Artnet, que si tu achètes et dédie un routeur à cette fonction, tu peux faire la même chose avec le DHCP de ton routeur qui attribut des IP 10.0.0. ... ou 2.0.0. ... Moi c'est ce que je fais mais j'aime les traditions ...

grego mondo

Oui, j'ai souvenir d'une embrouille de priorité entre les 2 adresses (wifi & filaire)

grego mondo

I love the midi dispatch !!
I used to use a data dispatch with has changed incrementing the destination voice (out 1, then 2 then 3, ...) to get in a sub patch

grego mondo

Yours is nice too Oli (and it calls grouped switches concept)
and the VU meters are pleasant

grego mondo

and so Ariajazz

Does it works for you ?

grego mondo

Hello if all your sources are in the same patch then you can make a sub patch with a mix volume in it (and as many voices as you need) Solo-mute_sub.PNG and use seq switches to get array of values for muting each voice of your poly sub patch Solo-mute.PNG for the solo there's a trick : If array from...

grego mondo

Et alors ?

Cela répond t'il à ton problème ?

grego mondo

You mean you feed a step sequencer with your Array and move your cursor where you want to ? "Also it would be fun to be able to set the steps colour individually with a color array." +1 I think I already asked for that, it would be really more efficient to quickly read an array and find the value yo...

grego mondo

Yo

J'ai envie de dire les bus sont tes amis mais la matrix aussi !!

Ci joint un petit patch qui permet de matricer tes midi learns vers le bus 1 , 2, 3 ou 4 (et plus bien sûr) dans l'ordre que tu veux puis d'en faire des preset

Schuss

grego mondo

Once updated the addons (and restarted Usine) there was no more question from computer for me, Usine figured by his own where was that (on PC)

grego mondo

grego mondo

super, merci

grego mondo

ok, il faut le faire

grego mondo

Mais pardon, où est Deploy ?
Je ne le trouve pas

grego mondo

Mersi Braz

grego mondo

Hop hop je remonte le sujet car il me semble me souvenir qu'il y a un tricks pour le faire

Bonne journée

grego mondo

grego mondo

I just loved the idea of multiplying by matrix array

grego mondo

grego mondo

I cleaned the Device in where there was some old RME midi device (wich RME isn't plug in this project) and seems to work fine.
Thanks

grego mondo

As a matter of fact I believe it occurs when I use my portable Motu microbook II (Motu ain't that good at updating drivers ...)

grego mondo

Hello

I sometimes get this message when opening Usine and I don't know what it is ...
anyone ?

grego mondo

Hello

I get this error message but I don't know what is it about ...
In this wkp I use few VST (wich I usualy don't, but they seems to works whenever

grego mondo

IMG_20250210_105804.jpg IMG_20250210_105754.jpg Years ago We have a gig with an old band (14 years ago) and I'm digging to rebuilt my old set up (Tuba FX + Sampler player + Theremin FX + Keyboards mapping and managing vst) ... Nice ! My wkp years ago was nice and tidy ! I'm quite surprised (I was a...

grego mondo

Hello

I'd like to be able to sort all midi learns (by CH, by type and then by value, by controller ...) and others learns would be great to

Cheers

grego mondo

Les 2 seraient super en fait,
- pouvoir attribuer des couleurs aux preset,
- pouvoir trouver les presets utilisés dans la grlle
voire pouvoir savoir où est utilisé un preset ...

grego mondo

Thanks, just what I was looking for

grego mondo

Hello I'm looking for a way to save an Array (something like Global Array Save Load File or Preset "save as file") is there anything like that ?

grego mondo

Hello

opening a workspace on the last version (that send OSC to Eos a lighting console) on a Mac (M2) my friend go the next message :
Error :
OBJECT : TMainForm
PROC : ProcessOSCSendThread
Error : Could not bind sockets

anyone knows about ?

grego mondo

It's funny,, here's what I use :
https://www.audiofront.net/MIDIExpression.php and piano pedals

it looks like the line 6 one ...

grego mondo

Dans le soucis de la tradition artnet j'utilise toujours des IP 10.0.0.x pour le boulot et ça marche

Quoi qu'il en soit il me semble que les cartes doivent être sur des IP semblables peu importe lesquelles

à plus

grego mondo

Hello Dans mon souvenir sous windows c'est filaire d'abord puis wifi après ... en revanche effectivement tu peux utiliser une IP fixe par carte (ou un DHCP avec adressage d'IP relatif à la MAC Adress) et aussi tu peux envoyer ton message OSC à plusieurs IP (en broadcast sous le même sous reseau ou a...

grego mondo

For smaller usb stuff, there's https://iconproaudio.com/product/g-board/ not so easy to find Hi, I saw this one or more exactly, I heard it : the switches make a awful lot of clicky noise ! good for heavy metal I suppose. Olivar Yes it makes noise (I forgot that !) but that's the smaller I know ! I...

grego mondo

For smaller usb stuff, there's https://iconproaudio.com/product/g-board/
not so easy to find

grego mondo

J'adore

merci

grego mondo

Hello For a small circus company I had to create music in surround with a very little budget I used HDMI output of the computer (even via mini display port) but it has to be a PC, never could get it working on Mac and then a small device HDMI > 6 cinch output (something like that https://www.conrad....

grego mondo

grego mondo

Alors https://bitfocus.io/companion peut s'agrémenter d'un strem deck un controller à bouton) ou pas cela reste une appli minuscule qui tourne sur ton ordi et que les autres peuvent consulter via ton ip :8000/tablet dans ton cas tu fais tourner l'appli chez toi et les autres la consulte dans leur na...

grego mondo

Coucou Tu dois pouvoir utiliser Companion pour récupérer le temps en wifi sur les tablettes. Dans un spectacle avec Usine & Resolume je récupère les temps de sections d'usine que je visualise sur un stream deck mais tu peux tout à fait les visualiser sur la page web de companion qui tournera sur ton...

grego mondo

Blu soleil ? or something like that as I remebmer

Schuss

grego mondo

Hello

Je cherche à enregistrer un Color Array dans des presets (pour piocher des couleurs specifique dans un tableau) mais je ne trouve pas comment faire ...

grego mondo

Nous en discutâmes à la maison l'autre jour donc, oui, à donf !!

grego mondo

grego mondo

Hello

J'en ai fait ça.
Un sub patch avec des entrées et des sorties à mapper.

Merci et à bientôt

grego mondo

Mersi Braz comme on dit par ici @rlgsbt Bien évidemment le plus simple serait d'entrée un Array, je suis d'accord :-) MAIS : en gros je récupère des CUE d'EOS (un jeu d'orgue actuel) que je veux faire correspondre à des presets dans Usine bref j'ai du 100 puis 102 puis 102.2 puis 105 puis .... vers ...

grego mondo

I would like to get as an array the "mapping in values" of a mapper value module (values that would be edited by hand)

I've seen there's no outlet for that.

But I was wondering what that black outlet on the mapper value module ?

Thanks in advance

grego mondo

merci

J'ai fais pareil mais en utilisant String Length & String Extract à la place de Get Value & Get Size

grego mondo

Hello

I would like to move the scroller of a panel Matrix.
Is there a way to do it ? I didn't find any inlet for that on the module ...

thanks in advance

grego mondo

Comme de par hasard une fois la bouteille (médiocre pourtant) ouverte il suffit de mettre un fader en sortie du string ... String Lengh > max d'un counter incrémenté par une clock String Extract (count sur 1) start position sur le counter - optionnel String to Lower Case sortie vers un fader donne l...

grego mondo

Yo, je cherche à transcrire du texte (une série de lettres) en numéros ascii ou autre En résumé nous avons enregistré un alphabet sonore et je voudrais créé une banque de sample qui soit lu en fonction du texte a puis b puis s puis c puis o puis n ... j'entre donc du texte (via la sortie string) ver...

grego mondo

Bravo Elsa !
Bien joué

grego mondo

Bref, je ne parle pas de monter une équipe de foot mais bien d'installation de "fenêtres"

D'aucune-un ont iels des retours d'utilisateur sur win 11 par rapport à 10 ?

Voilà, voilà

grego mondo

Oui, tout à fait ça marche, j'ai configuré mes routeurs boulot de cette façon

Je peux accéder à internet, en revanche pas à mes disques durs réseau (à la maison) car je bosse sur des plages 10.0.0. etc et mon réseau local est 192.168 ...

grego mondo

Yo Ben oui bien sûr le filtrage mac adresse il va de soi que cela fait parti des choses qui se font. En pratique évidement soit je branche mon routeur "spectacle" en filaire sur le domestique pour internet soit je suis en filaire vers ce routeur "spectacle" et en wifi vers internet (et ça marche imp...

grego mondo

Là j'ai testé avec des cartes Arpshuino ... Bien sur si je vais en filaire vers un routeur tout va bien C'est au départ d'usine, si je suis connecté en filaire à mon réseau domestique (par exemple), je n’émet pas de artnet en wifi En gros si je suis connecté en filaire ET en wifi usine n'émet qu'en ...

grego mondo

Hello J'ai l'impression que lorsque mon pc (ici avec 6.0.240130) est branché simultanément en filaire à un réseau et en wifi à l'autre le Artnet tente de sortir par la connexion filaire. juste wifi vers les machines dmx OK juste filaire vers les machines dmx OK filaire réseau domestique et wifi vers...

grego mondo

Salut

Sans doute un peu plus de précision nous aideraient à t'aider.
Quelle interface, quel problème ....

grego mondo

It works, the only things are : 1 Song Name wasn't "recall safe" and 2 Once you've changed song then you have to recall a preset here now : Song A 0 is no switch 1 is first switch 2 is second switch 3 is third switch Song B 0 is all switches 1 is all switches except 1 2 is all switches except 2 3 is...

grego mondo

Do you see the pop up ?
that's where you will select the target of the preset manager
I imagine you should use :
rack if all your FX are in the same rack,
workspace if you use several racks

grego mondo

"Yes, at first that's what I suposed it would do but it does not work, the preset manager simply does mothing when choosing presets, does not recall the presets saved" You just have to choose the target of the preset manager : current patch (that's the actual state but there's nothing to save in thi...

grego mondo

Well the combo box let you choose wich song and then you have one different preset manager per song...
Isn't that what you wanted ?

grego mondo

something like that ?

grego mondo

may be one preset manager per song and making it visible only (and selectable) only for the desired song ?

grego mondo

Hello

si j'ai compris, en Anglais c'est :
Grid clic droit (= proprietés)
global fade setting (en bas) "fades also on backward".

Et hop

grego mondo

Delete value !!

Génial

merci

grego mondo

C'est beau, beau

merci

J'ai cleané un peu la chose en supprimant les doubles et rangeant

grego mondo

Hello

It's made as in a real rack
Audio from above goes in the audio in
and the audio out goes to the patch below
where
Audio from above goes in the audio in
and the audio out goes to the patch below

in your picture audio goes in the MXR DIST and then in the KLON

grego mondo

C'est beau en tous cas En fait J'ai un matrix (qui est aussi une sorte de plan, mettons de projos par perche) J'ai donc des perches avec 2 projos puis d'autres avec 4 J'aimerai garder l'idée d'une ligne par perche et donc d'avoir des cases "vides" Je nomme les cases pleines avec mon nom de projo. Je...

grego mondo

Salut J'essaye, proprement, de soustraire la liste de switches actionnés (genre 1,5,8,9) à une liste totale (1,2,3,4,5,6,... ,9,10) pour n'obtenir que la liste des non sélectionnés (ici 2,3,4,6,7,10). En gros j'aimerai remplir deux arrays et les comparer pour ne garder que ce qui n'est pas récurent ...

grego mondo

à y re-réfléchir, pourquoi pas avoir un tel visualiseur de Array ? je vais essayer

grego mondo

That won't really do the trick for me, it's for an easier (quicker) way to read array without counting the steps (something like for a projector have the RGB steps in R, G and B, the dimmer in black ....)
Thanks anyway

grego mondo

grego mondo

Hello I'm tryting to find several instance of the same word in a Comma text I tried using CommaText Get String Index but I only gives me the first instance of the desired string to search Is there another way ? I can build a patch that would search again from the found index +1 and again and again b...

grego mondo

It's almost all in the title

I'd like to be able to set different color for each step of an Display array (or step sequencer ...)

grego mondo

Mersi braz comme on dit par chez nous.

Je vais suggérer ça : entrer un Color Array pour choisir la couleur de chaque colonne valeur.

A samedi

grego mondo

Coucou de Brussel pour une fois est il possible d'entrer un array color pour choisir indépendamment la couleur de chaque step ? le big step fait la farce pour indiquer 1/4 ou un truc du genre mais j'aimerai le step 2 en rouge, le 3 en vert, le 4 en bleu (par exemple, au hasard , hein, je dis ça ...)...

grego mondo

Malgré le fait que les pouces en l'air n'aient aucune retranscription ASCII j'écris sur mon clavier sans pouce (et il va sans dire que la barre espace, 64 si mes souvenirs sont bons, n'est pas aisée)

grego mondo

Que j'en serais, déjà tu le sais !!

grego mondo

ok, thanks I already used the button "set off" trick but I was wondering I there's something I missed about the grid (as a fader where you can write a curve in the grid). For the preset in the grid symbol could do the trick if your grid is large enought to read the text but I understand the choice m...

grego mondo

Hello It's more about the beauty of the gesture (la beauté du geste) cause I don't believe it cost much CPU I need to get synchro information (cycle lenght, start, ...) in several patches. Is it better to get information from one SYNCHRO MASTER feeding a global array and get values from this GA in e...

grego mondo

Hello two questions about the grid Is there a way to choose the color of preset (dropped in the grid) ? I find it easier to read (I should say recognize) where the preset comes from (delay rack or ...) when u can give it a choosen color. Also I can't find how drop a switch in the grid in an "OFF" po...

grego mondo

Voilà : Gwen correct.wkp 1, 2 et 3 se contrôlent mutuellement. Comme souvent, c'est des histoire de pass if change J'ai aussi relié le combo box au Bus pour le voir changer J'ai retiré le contrôle midi sur les sampleurs 2 et 3, celui du sampleur 1 suffit puisque le bus synchronise les 2 autres sampl...

grego mondo

Le but c'est quoi ?

Le lecteur 1 change le 2 et le 3 ? et vice et versa ?
le bus en GLOBAL

au contraire ils sont autonomes ?

grego mondo

Hello

Le quick link ne fonctionne qu'à l'intérieur d'un patch (et de ses sous patch)
dans ton bus tu peux choisir sa "portée"
- global (all usine)
- rack only
- top parent patch
- current patch

c'est là que tu va pouvoir selectionner rack only

grego mondo

Salut

C'est ton bus "file number" qui va vers tout usine qui communique d'un sampleur à l'autre

Bonne journée

grego mondo

Hello

Wouldn't it be nice to be able to see the channel in the learns ?
Also I would love to be able to sort learns by type (note, control change ...), value number, channel, name of the control ...

Have a god day

grego mondo

Thanks, I'll try that when back home ...
Glad it helped

grego mondo

I love the Inspector !

grego mondo

@ oli_lab, thanks

Nice way to control the random colors "pickable" but my actual purposeis to fill cells with random colors and to "fine tune" it by hand.

grego mondo

Hello

I'm planing to record a dmx stream (and play it later), how should I do ?

grego mondo

ok
I did :
Random color Array > Color Array to Colors > pass if changed > color fader

grego mondo

Hello, I can't find the randomize inlet for color fader
I have sub patches with 4 color fader that I want to be able to fill myself or to randomize ...
What trick can I use ?

Good day

grego mondo

Ok, it is not in the setup expert tab as the manual seems to says
but it's the magnifying glass icon in the main menu.

"Pourtant c'était simple"

grego mondo

Hello, Trains journey are great to read manuals, aren't they ? I'm interseted in Inspector (lokks like a great tool when building complex wkp) but can't find how (and where) to activate it. Manual talk about Setup/Expert tab but (on win) I can't find it. Is it me ? Is it somewhere else ? Have a good...

grego mondo

grego mondo

grego mondo

hoppy one

grego mondo

Hello, it's in the title as we say.

Should I go on win 11 or stay with 10 (wich seems ok to me) ?

Have a good day

grego mondo

Hello

Something like midi input / midi filter multi ?
filter num let you pass desired cc whatever the midi channel (remeber to untick "force out range in 0.1" if you use value out)

hope it helps

grego mondo

There's an inlet PANIC in the Module/Interface Control/Usine Panels/Usine Master Settings
that allow you to control it from any button or bus ...

Hope it helps

grego mondo

Waouh !

grego mondo

Hello, I remeber Arturia controllers have 2 relative modes for endless controllerrs :
one is 1-127 and the other 63-65 (or 64 can't remember or test just now).
the second one worked for me.

grego mondo

Salut Pour des retours d'infos sur un launch pad c'est la vélocité qui va donner la couleur à ton pad, donc la motorisation n'est pas la solution. Sans doute y a t'il plus malin mais moi je créé un message midi pour envoyer telle ou telle couleur à chaque pad ... Sur un switch midi learné je récupèr...

grego mondo

What I try to understand is where would this feedback go ?

in my osc learn tab I see :
OSC message
OSC tag order
OSC mode
OSC feedback
OSC feedback port

but no IP destination for feedback.

What I am missing ?

grego mondo

Hello I just bought a Stream Deck I figured out how to dynamicly send from Usine to the stream deck Column name, number and color, also elasped time. Great tool for a remote for shows (always good to to have all information on a controller). I would like to get feedback of the "on-off" state : I tic...

grego mondo

L'Array est ton ami (pour la vie), c'est sur

grego mondo

Thanks

grego mondo

Hello

I would like to change my working computer (actually windows i7 Lenovo laptop) and I wonder if anyone has (or has tried)
a Mac Mini M1 or a Lenovo p340 (tiny) i9 (10900T with Quadro p1000) ?

grego mondo

++++++

grego mondo

Looks like the problem was Avast

grego mondo

Hello, have any one experimented midi interface (usb) disconected after a while ? I'm trying to understand if it comes from a power problem or if it's due to inactivity in Usine. I already experimented that it can happen with a powered usb hub or on the usb port of the computer. Then I'm fighting wi...

grego mondo

Remote expert.wkp: OSC ports in the popup; (228.62 KiB) Downloaded 671 times

Hello

Sorry about delay
I found this patch and cleaned it and updated it
You can affect easily mute group (1/4) and alomost any fader of the input.

Hope it helps

grego mondo

Hello

I used to control my RME UFX in osc from HH (years ago) I can search for the patches I used but it seemed (to me) easier to use OSC than midi.

grego mondo

merci, oui, super que ce soit lié au wkp !!

grego mondo

Salut à tou·te·s dans HH5 je ne trouve pas comment faire apparaitre la grid au chargement ... et aussi j'aurais quelques petits bugs à rapporter dans le genre knobs (ou faders) qui s'affichent (une fois le wkp sauvé puis rechargé) dans le control panel malgré le fait d'avoir sélectionné invisible ou...

grego mondo

grego mondo

Hello, if I understood what you want : movement trigger play clips 1 at the end : no move = stop still moving = next clip If so, I would use the movement trigger to restart a counter (let's say for 2 sec) and use the counting outlet. 1 means there was a movement less than 2 seconds ago 0 means no mo...

grego mondo

Hello

maybe something like :
extract first part of array
concact it (3 inlets) with the sub array and the other part of the array ?

grego mondo

Yeah yeah yeah !!

Thanks

(P.S. Can't wait to test the HH5)

grego mondo

So I created a fixture of 200 channels, naming each channel (as LED RGB fixture), I've noticed if several channel have the same name only the first one has a visible inlet (when you drop the fixture in a patch) Dispatching value to different inlet of that fixture actually work, took a long time to w...

grego mondo

Thanks,
I had created fixture of 200 ch with names and ... but I don't want to send the whole array.
I'll try to make 200 fixtures of 1 ch and make a dispatcher in a subpatch so I can send only one dmx value. (I don't really need to be able to control the 200 channels, 50 will be ok).

grego mondo

Hello I'm looking to be able to change dmx channel dynamicly. I'd like to be able to choose on wich dmx channel I send value, sometimes on the 64, then on the 98, then ... somekind of a dmx matrix. I tried using a direct dmx array choosing wich value I was sending but it sends all 512 values Hoping ...

grego mondo

OK
Here you have a "play" button (was named Restart in pop up window of version 2)
and a "end loop" button wich stop looping and play until end.

And a "Total stop" wich does it

In the pop window you have a switch to activate (or not) the automatic play when patch is activated

Enjoy

grego mondo

Good.

Pop up window is there just to show extra controls or informations when you need it but is easly "hidebale"

grego mondo

Something like that ?

in the pop up you have a trigger that act like patch on activation.

Don't forget to walk in the snow if you can

grego mondo

Here with a fader to set the start of the loop (the pass flow was passing 0 as start point)

Video Loop in.pat: (38.53 KiB) Downloaded 562 times

grego mondo

Hello

Playing with video player I tried (unsuccessfully) to play a video in backward
I'd like to play a loop forward and then backward ...

Any idea of how could I do that ?

Take care

grego mondo

HI @ Sylvain I had tought of CPU consuption so I made a samll tool writing the max CPU consumption of each section in an array, unfortunately the greediest cpu section aren't the ones where it occurs. Thanks @Senso Trying to isolate the problem but obviously the more I search the less it occurs (fro...

grego mondo

@ Sylvain

oui, même encore plus simple le button sur entrée millisecondes du get smpte.

merci

grego mondo

Salut Merci Sylvain, le get smpte je l'utilise (comme retour horloge et pour remplir mon tableau) Le set je n'avais pas réussi à m'en servir pour remettre à zéro (plus d'une fois) mais, grâce à tes conseils j'ai insisté puis compris qu'il fallait en gros get smpte > set smpte et à un moment faire st...

grego mondo

Salut, j'utilise régulièrement des bus dans mes devices pour des routing audio ou midi et c'est super car sauvegardé mais je ne vois pas comment utiliser un bind dans un device pour activer le rec d'Usine ou "restarter" la smpte sans learner les dits boutons, peut être suis-je passé à coté de quelqu...

grego mondo

Salut à vous Je perds à chaque re-demarrage d'usine mes learns des fonctions du master panel sur la fonction rec et le start de la smpte par exemple j'ai essayé avec un binds, un midi learns, en les glissant sur le grid ... suis-je passé à coté de quelque chose ? y a t'il une astuce permettant de co...

grego mondo

Hello and hoppy new year (yes I like beer, don't you ?)

I've experienced small cut in the sound with sampler playing when I press next section in the grid (with my patch with sampler across two sections) as anyone experience that ?

Take care

grego mondo

Hi it' mostly in the title I would like to be able to sort the Learn list (all midi and key learns ) to easily find a conflict (like 2 controllers learned on the same midi message creating conflict when acting as motorized devices) or being able to sort it by midi chanel ... Also I've noticed my lea...

grego mondo

Hello I'd use a switch for rec to activate a pass flow getting a master sync cycle trigger to set on another switch recording and another switch for play to activate a pass flow getting the master sync cycle trigger (setting off that play switch) to play the sampler. It's in that quantized rec &...

grego mondo

Mersi bras !!
Thanks

grego mondo

Hello

trying to recall Bank in midi sampler, I don't get it
What's the text input I should give ?
something like C://Usine/Compagnie & porjets divers/..../mybankname ?

thanks

grego mondo

Hello, working and scales these times I think there's a small error in some limited Messian mode the 4th in Usine is 0;1;2;5;6;7;10;11 and I believe it should be : 0;1;2;5;6;7;8;11 and the 5th is 0;1;5;6;7;10 and should be 0,1,5,6,7,11 Am I wrong ? anyway it's a good reason to start using user scale...

grego mondo

Classe, des super idées, des bons tricks !!
Toujours chouette de voir la structure de patch d'autres personnes.

Merci

grego mondo

Hello Don't forget to activate Share active in the network tab of setup before trying to use Midi to Lan & Bridge ;-) I'm saying that because I was : Trying to use Midi to Lan (& Bridge) and looks like I'm missing some basic point wich is ... Both machine on the same network, IP similar 10.0.0.40 & ...

grego mondo

Définitivement : La classe !!

Ultra stable ! Bien joué, Jean passe et des meilleurs

grego mondo

What a teasing !!

grego mondo

J'ai envie de dire la classe !

Allez, je le dis : la classe ! (sans Bézu)

grego mondo

Hello Sunday people

Reading the manual I found some cool modules I'd like to use in the "new module" chapter
But I was unable to find them in Usine ... Is it normal doctor ?
e.g.
Multi bandpass Audio filter
Logical Multi compare

Best weather and health

grego mondo

Hello A workspace extracted from a complex array's quick link and other data buses In both patches pop up will give you information This is a step sequencer (like on rythm box) viewable (and editable) on a laucnh pad. I made it on a Midiplus Smartpad (no aftertouch but 8 encoders) but it should work...

grego mondo

Thanks for that long answer (and the long thinking about it) Good for that multi-threading thing, even if unpredictable, it's now understable for me (I thaught I remember that order thing form an olkd version, but my mind isn't has clean has my patches) Yes I moslty (always) use on/off for patches (...

grego mondo

Thanks for that quick answer !! I don't know how to change the name of a cluster value but my names 2, 3, ... 11 are the begin of the names of the tracks, actually it's more : 2-Tuba, 3-Serpent, 4-Music Box (where I nammed the track Tuba, Serpent & Music Box, and Usine renamed it 2-Tuba ...) so I'm ...

grego mondo

Hello Using this home time to optimise my global architecture of workspaces I'm trying to understand how to optimise theards and core calculation I have a 4 core cpu (i7-3720QM) so 8 threads I understood calculation goes thread 1 (tracks 1, 9, 17, 25 ...) thread 2 (tracks 2, 10, 18, 26, ...) ... thr...

grego mondo

Hello Looking for a way to control volume track from 2 différents midi controllers midi motorized device : OK, working feedback between smartpad & midifighter twister : OK, working (found a trick so I can have different order in both of them) I first thaugh of using buses to control tracks volume bu...

grego mondo

Loin de moi l'idée de cracher dans la soupe, pardon si c'est ce que je laisse entendre, c'est que je me suis mal exprimé et j'en suis désolé. J'utilise Usine depuis un paquet d'année (en donation ware quand j'ai commencé, c'est dire) et cela reste mon logiciel fétiche, je l'utilise pour tous mes pro...

grego mondo

La Classe

grego mondo

Oui, oui, bien sûr ce n'est pas lié à la communauté d'Usine (pardon si c'est ce qui c'est compris), juste à l'utilisation de la majorité des utilisateurs qui (et c'est normal, à moins que tu ne veuille synchroniser d'autres machines) utilisent Usine comme une "fin en soit", ces variations étant infi...

grego mondo

Salut Oui j'ai eu ces problèmes déjà, déjà soulevés aussi mais cela semble laisser les gens indiférents. Pour les prises que j'avais faites pour un disque j'ai recalé chaque mesure à la main et depuis soit Usine est esclave d'une clock si j'ai besoin d'une stabilité parfaite, soit je joue avec ces t...

grego mondo

thanks

I have to say I'm happy the problem didn't come from me

grego mondo

My method seems to work on the master sync

grego mondo

Hello there I 'm using a local sync for a looper patch. I tried to change the metric of this local sync but I can't ... Using a sting to comma text I entered 6/4,6/4 in bar list (I see it when looking at my local sync) but still the local sync shoes (and act) 8 beat per cycle and ignore my bar list ...

grego mondo

Hello

Why don't you use a button key learned ?

grego mondo

Sorry.

there's also the 32 encoders

grego mondo

Here it is ...

May-be there's a smarter way to do but it works.

grego mondo

Hello all I have a few questions of differents topics How do you upload a patch to share (the smart pad adaptation version of Joffo's Launchpad wizard) ? Is there a cpu difference between 12 busses of floating value and an Array bus of 12 value ? Does a subpatche add latency ? e.g. the same patching...

grego mondo

Great, thanks to share. Never tought I could feed control 1 of a "create midi message" with an Array, I used to create as much "create midi message" as I needed. But that was before. I'm making a version of your patch for midiplus smart pad (because as it doesn't have aftertouch it need note off bef...

Welcome to %s forums

Search found 456 matches