Welcome to %s forums

mat

this is a cool one, a very cool one! as 1 of my main goals is to get smooth transitions between sounds and i was working with conductor on this which gave some little problems, like the patch turning on or off in the middle of the time=hard switch ... still i am to stupid to figure out how to set va...

mat

someone in berlin area who has/will order?

letz connect then ...

mat

aha

will test

thanks

edit: perfect ...

mat

if patch is selected=1
if not selected=0

the "on activation"only gives a impuls,so not working with "toggle".

but i want a permanent value.

danke

mat

i see.

thanks!

mat

can someone explain me the technical difference between vst and vst-i?

vst can have audio in. vst-i not. is it that? processor load?

cant i just use vst for effects and instruments and forget vst-i?

mat

ahem, of cause draging a wire creates a moonbox/listbox ... bad describtion, sorry the midi idea would work, but i would have to copy/paste after every preset name change to keep the list updated. its about the reading/updating list text thing. could not get the above link (moonbox combo) to work. i...

mat

i am working on this now, too. strange behaviour: the conductor with "store vst" on does NOT store my reaktor ensembles, it just does nothing on them ... (5.08.004). is there a trick i dont know? (i did not use "not stored in conductor" in the vst patch) the preset manager DOES store the vst, BUT: r...

mat

i am at the same problem now. automate update a list box after alter a preset in a vst, (not combo box). but i am a bit dyslexia, so this mostly ends up in a steaming brain and lots of confusion. i dont even know how to connect the moon box patch to my reaktor :rolleyes: ... and on top of it i would...

mat

WOW! der hammer!
do you use stuff like reaktor and max for live also?

mat

no. never had this module running. to scary about midi loop backs! can only be a mess if not carefully filtered ...

apart from that: i hope i got it solved forever with the interface

mat

i would not go on stage with this thing :) nervous enough, and then a 70Hz or 4000Hz sound builds up and 20% of the audience has a hearing problem after :rolleyes: :/ @alland: yeah, its like a rubber delay, it does what you did, but without any timing. it happened even minutes after start playing fo...

mat

good luck with that.

so the other way round: if usine works with the fireface then it should be something else than usine.

edit:

here is my old thread regarding this:

http://sensomusic.com/forums/viewtopic.php?id=2854

mat

the babyface should be ok. my hammerfall never had this, too. i have a lot of midi data too with the hpd15, mtc+pitch+aftertouch+hihat controller data+D&B fingerdrumming on 150bpm+machine generated 64th rolls all on one midi channel. there might be timing issues on midi overload, but the "going up-d...

mat

i had exact this, too. drove me nuts ´cause it was not to reproduce. "rubber-midi".

it was my midi interface or the driver. had to get a new one, now works perfect.

whats ewi? blow controller?

mat

Hi , i need some precisions about the packard bell viseo 200t in fact i have problems with my vertebral cervical and it's difficult for me cause since a week i'm completely blocked i saw the assembly on nay's website and my question is can i incline it more than it's showing if i remember well at t...

mat

and another funny toy found here

mat

apart of all excitement about great usine i agree that updates are always a bit of a hassle, to get everything running again.

ok, i dont know about programming and the reasons to do it this way, but yes, a bit confusing to get own layouts and all adons together again ...

mat

@nayseven: your file opens correctly. i opend another midi file from my collection (comercial product) direct into usine: works. same file opened in nuendo and exported (as format 0 and 1 ): in usine both are broken, in nuendo reopened both are correct ... :P so it seems to be something with nuendo ...

mat

yes, is latest version.

will test with other source software.

mat

i created some baselines and harmonys in nuendo2 as midifiles. when i look at the midifile in my nuendo2, the notes have different length, everything looks ok. if i import the same file in pianoroll, all notes have the same length (1/32) ... ??? no quantisation on, not in nuendo, not in the piano ro...

mat

if it is compatible it can use much more ram

ah, yes, nay is right. it can use more ram if its written in 64 bit.

mat

i run usine on xp 32 and win7 64, with battery and reaktor. reaktor is not 64bit! on win7 there is a 32bit prg. folder, win automatic puts 32 bit prg in there. i tested my win7 64 bit in the beginning very extensive, did put on every stone old 32bit soft i could find to test it. had NO problems, eve...

mat

you dont tell about your audio interface/sound card. is it the on board sound chip? and speakers matter alot, too... if u used the same speakers with the different pc s and software then it might be a speaker problem. it can be a problem with guitar amp. too, maybe it has a bug. i dont know the soft...

mat

thanx

if there are questions... dont hesitate

mat

its my first NI hardware, so here my review: technical data can be easily found on the web, it has 4 balanced analog in/out and s/pdif in/out, 6ch together. look+feel: solid, metal housing, plastic on the sides. stabile connectors, the plugs snap in tight and are not loose. the usb conector is someh...

mat

ok, review (with "v") soon

mat

so, yes, it was my midi hardware. who would expect that from a device with "roland" and "cakewalk" printed on it... with the Komplete Audio 6 it runs perfect, both my wkspace and the midi overload uploaded by senso after 3-4 hours testing. could not overload usine by sending midi clock + hihat contr...

mat

yes, thanx alot for this! days of anger and testing are gone :) (hopefully) so its not a problem in my workspace! sad that i cant use my RME multiface for live, my thinkpad is to slow for that, thats why i never tested this in there and the acer only has usb. but woodslanding says he has the same is...

mat

yes, i testet around with the blck size. 64 starts crackeling. 128 did not solve. i know its difficult with so much possible combinations of hardware to exclude all problems. but i realy did spend lots of time with this. i was hoping to get some general hint on how midi is treated in usine to narrow...

mat

i was thinking (and testing) a long time before writing this post, cause i was not shure at all about what happens. but its obvious for me now: usine sometimes gets a "midi overload". it stops responding to midi input. then i stop drumming. then i can watch faders move and knobs being pressed just t...

mat

yes, heavy price.

the 17" 2-point is 199. did not figure out its only 2 points at first.

would prefere 15" or 14" multy for my setup anyway, so i could travel light. but noone makes something like that, only huuuge cinema displays ...

mat

something new with multitouch:

http://www.youtube.com/watch?v=ujTnub2W ... r_embedded

mat

thanx for this post. i always was wondering why i am not able to make some kind of "loop" from out to in to make it refresh the list. so: lots of ctrl+A ctrl+x ctrl+a ctrl+v ...

mat

ha ha ha

alles kaputt!

mat

ok, now i got it. it is obvious for the dashboard (only one start/stop possible).

so lets dive a bit more into this great software.

have to take care not to drown...

thanx

mat

thanks, i´ll try to understand that patch. i´m bad in maths and logical things. so using the conductor module only within a patch is not posible, just to get the preset fade times? it always stores and recalles globally (exept isolated controlls)? its difficult for me to understad how the F8 conduct...

mat

well, maybe i better say: i want to "morph" one sound to another on one single patch, maybe with the use of a mixer which crossfades from one vst on channel 1/2 to another on 3/4 within the patch, or any other way. without affecting any other patch. all by hitting one pad on my controller. i have 12...

mat

well, thats the point where i am not really shure how this works, how the command structure is. so to isolate a patch means it is only responding to a conductor module which is inside the patch? and it only isolates to the global conductor and not the one inside the patch? hmm, have to think about a...

mat

the idea is to trigger presets/snaps only on one track/patch, like changing the sound with fade time on the track/patch "melody" without changing it on the "rhytm" track/patch to get smooth crossfades to another melody without changing the beat coming from another track/patch. it seems the conductor...

mat

it seems to work now, one hour playing and no hangup. the key was i guess the 64ms bloc set to 128. and maybe the (i think new) midi clock patch in 5.5, using 5 midi in modules instead of one in-module and 5 filters. tempo realtime changing is not perfect yet, but well ... less is more. now cpu in u...

mat

thanx nay-seven and floego for the tips.

i will work on that hopefuly tomorrow again and tell.

mat

memory: i have 4 gig, about 1.5 to 2 used in the set. cpu: the help says with multiprocessor you can go to 100. anyway, i will test it with 95. only 35 percent used max in my setup. 64: i will test 128. but for fast live drumming i thought 64 would be best. i run the drums audio through usine for FX...

mat

hi, i ve uploaded a file called "OptMetronom" in the upload section: http://www.sensomusic.com/forums/uploads.php?file=OptMetronom.pat my idea for my performance: usine plays the background beats/atmos, in 4 instances of ni reaktor and one ni battery. i change the programs in the reaktors with a kor...

mat

thank you very much, nay-seven.

mat

anyone in the forum berlin based?

it is about midi clock sync problems, tempo of usine goes in a weird way up and down after runnin good for some 15 to 20 minutes with a roland HPD 15 as master. no midi loop. might be a patch problem to analyze. me helpless

thx alot.

mat

mat

as im always on the hunt for max performance i was immediately fascinated by the topic. same problem since a long time *aaarrrggg*: crackeling on only 50 percent prozessor, i always was wondering about that (even thinking about a mac.....) so now first time i looked up my irqs. i have 190 irqs on wi...

mat

@ woodslanding / bsork: same here: hammerfall pcmcia shares with graphics (xp). no way to change that, except change from ACPI to "standard-pc" in device manager via "update driver" on "computer", then u can manually assign irq. but that seems to be a big hassle... i will not test it :D i´ll rather ...

mat

it was also for start/stop with the start button on the drums, now i changed the midi clock module so it reacts on start/stop, but tempo is by usine, remote controlled with another knob on the drums, could work . i will try your tips anyway, did not try unpack and blocksize sounds like a good idea! ...

mat

yes, lessons... who t** f*** did plug in that midi cabel ... :rolleyes: spend a day reading manual and trying things... this is great stuff! still - problems with clock sync: i play a e-drum with hihat pedal. this drum gives midi clock. it sends controller when i step the pedal. so if i play fast sn...

mat

@ gurulogic

u know what? it _was_ midi loop.....

stupid me :rolleyes:

mat

ah, unlock...

done

fascinating toy already......

mat

@ gurulogic:

the patch from 23fx23 made it, see my edit in the post.

hpd worked with reaktor standalone with the same setup so i did not think about cable or bad midi data. no loop either.

i think i will be buisy the next days ....

mat

thank you 23fx23, this was fast! i did read about the tempo range in other post but could not find it, now i understand: subpatch.... got your patch, will test it. seems i make no mayor mistake in my setup? will test another plug instead of reaktor, too. EDIT: it works! only problem: there is a grap...

mat

hi all, just today discovered this great peace of software. first thing i want: midi clock responding to start/stop and sync it with my hpd15 which should be master. i load a new empty workspace, put the receive midi clock patch on track 1, reaktor on track 2, switch on sync in usine (yellow arrow)....

mat

this is what made me download it today

Welcome to %s forums

Search found 56 matches

Login • Register