Welcome to %s forums

tanabarbier

Hi! Sorry for bumping an old thread, but I have a similar issue, after a crash I lost my activation (along with the config, indeed), and my problem is that this computer can't go online (no wifi and faaaaar from my "internet box"). So I guess my solution would be the "activation key" ? I look for th...

tanabarbier

When I want to do this I use a selector, with an empty in, it does work (you have to select "audio/midi" in the properties of the object IIRC.

Have a good day!

tanabarbier

Thank everybody, I think it is working, I guess my problem was to have the loop in play mode, the rec mode to overdub, and so when I clear, the lenght of the loop stays stored, or something like that. To have it work the way I want I still have to make a few logic conditions and so, but it seems to ...

tanabarbier

Yes, that is what I was experimenting with. My problem is that I want to be able to record it on the fly, and I want the loop duration to depend on when I press rec a first and then second time. If I quantize this switch the loop will have a quantized duration, but I also want the loop to be able to...

tanabarbier

Hi! I'm trying to make a MIDI looper to use with samplers, synths etc. I am looking at the pianoroll to do it, and I managed to record loops, quantized or not, but there still is a few things I can't get right. I'd like the looper to reset the size of the loop when I clear an existing loop, so that ...

tanabarbier

Aaah! OK, thank you very much! Got it.

tanabarbier

Hi everybody, I can't get my head around the concept of routing in HH, I am trying to do the same things I could in Usine 5, like using a track as input of an other track, having a master track, etc, but I can't figure out how. I looked in the HH manual and did not find anything about routing. Could...

tanabarbier

Hi, thank you for your answer. There is something I still don't get, what you are saying is that you can route any track (and all of them if you want) to an other track, and so this one would act like a master if the sends are "pre" and the stereo outs muted? What bothers me is that if I do so then ...

tanabarbier

Hi! I can't find how to have a rescan, I looked at the manual, and the plugin setup tab does not look like the one in the manual photo. Is it because of an update change? The thing is that the one I have in the setup does not have "folders" and "rescan", it only has a "converter VST folder" option, ...

tanabarbier

Hi everybody, I miss my master track! Is there a way to have the equivalent of Usine 5's master track? When I route everything to a track and use it as a master track I have to use the sends levels instead of tracks faders, and have to make the solos and mutes, and can't use the de-soloing button th...

tanabarbier

Thank you very much!

I am checking the oscilator, I like it! Is it wavetable or an algo generating the signal? Sounds like wavetable to me but I can't be shure.

tanabarbier

Ok I am starting to get use to that. One thing I still miss is "find in patch", is there a way to do that?

Thank in advance!

tanabarbier

Ok, I don't really see how it is better for everybody but I don't have to get it to get used to it! So what is the equivalent of the "right click in the background of a patch", where you had a list of favourites modules to choose from? That was awesome! Is it the favourite list that is in the browse...

tanabarbier

Ah, ok. Of course you know that right click exists on Mac OSX? Just joking. I know I am about two years late for that debate but is it something definitive or something that just isn't implemented for the time being but you are planing to do it? I ask because as we program everything with the mouse ...

tanabarbier

Hi everybody! I am only starting to play with Hollyhock, currently 1.1.008m, and I can't right click, it actually has the same effect as a left click, is it normal? Is this a OldMacOS emulator? Haha, I'm sorry, I am so lost right now figuring out everything, it probably is right in front of me but I...

tanabarbier

I am so stupid! The number is in "samples", ok. Thank you!!

tanabarbier

Hi everybody! Any improvement on looping with Hollyhock? I really haven't the time right now to learn the new version and convert all my workspaces etc, so I keep on using 5.8 (that I love, besides this looping problem). I tried a lot of different approaches to that clic problem, and I don't know, I...

tanabarbier

Thanks to everyone who tried it! I pushed it a bit further with four sequences by element and a probability to use the other three from bar to bar (you like from time to time but bar quantized) and a swing, to make it even more "human". Should I update it? The one thing that I don't like with this c...

tanabarbier

Hi everybody, this is a simple toy but it is fun! It is a 4 elements drum machine, for each one you can set the probability of the element being played at each step along with its velocity. Here two pictures: http://www.sensomusic.com/forums/uploads.php?file=Definitely%20maybe%20drumming%20pop%20up%...

tanabarbier

If that is possible, that will be swell! I'm shure it's going to make every electroacustic composer (and I know there is quite a lot here...) overexcited like children on christmas day!

tanabarbier

Automation recoooooooooord, sorry, aaaaaaaaah!!!!

tanabarbier

A lot of congratulations, really excited about that new Usine, wow!!!

tanabarbier

I think we are a lot... And more important, it's extending!!

tanabarbier

An other hysterical fan question about V6: Is there going to have a kind of native 32 bits plugin wrapper?

tanabarbier

Hi everybody!

A new band I´m in, drums and guitar, the guitar being Usinized before going to a guitar and a bass amp. Total destruction inside.
It's improvisation rock oriented, deconstruction mostly. I hope you enjoy!

http://soundcloud.com/volcan-df

Thanks!

tanabarbier

Ah ah, 9.999€ ça doit être un pack "tous les produits Behringer" non? En tout cas ça a l'air intéressant pour avoir plein de boutons pour pas trop cher, et si c'est modulaire ça va interesser pas mal de monde je pense... Ils ont souvent des produits bien placés chez Beber quand même, c'est juste qu'...

tanabarbier

Ah ah, 9.999€ ça doit être un pack "tous les produits Behringer" non? En tout cas ça a l'air intéressant pour avoir plein de boutons pour pas trop cher, et si c'est modulaire ça va interesser pas mal de monde je pense... Ils ont souvent des produits bien placés chez Beber quand même, c'est juste qu'...

tanabarbier

Justement je me demande si la sortie de PUSH ne va pas être une oportunité de trouver des apc d'occaz en grande quantitá et donc moins cher... Je croise les doigts. Et l'APC d'après ce que j'avais compris c'est un sysex un peu compliqué mais de bon vieux MIDI comme on nous en sert depuis presque 30 ...

tanabarbier

I just saw that, thank you!

tanabarbier

Hi everybody! I'm glad to say that I'm going to give a workshop with Usine in the SAE institute of Mexico City, starting november 6 (that of course is depending on the number of people attending...). I think it's going to help spreading the good word about this great great software here in Mexico! h...

tanabarbier

You have a track input module (is it the right name?) that you can put anywhere, just specify wich track you want it to control, and then a input volume inlet, if I remember well. At this inlet you connect a switch with the two values (for on and off) that you want and that's it!

tanabarbier

Thank you!
I really think he deserve it.

tanabarbier

Hi everybody! I just finished a trilogy of Usine based improvised experimental music albums, and I wanted to share it here. I take this oportunity to say that Usine is really the tool I was missing without knowing it before I knew it, and again, a big THANK YOU to everyone working hard to make it so...

tanabarbier

Oooh that's a good news! Can we have a clue to try to guess with what are you going to enter? I promes I won't tell the others your idea!

tanabarbier

It is really cool that you get involve in this, because KVR DC is a source of sooooo many really good plugins!

tanabarbier

Au dessus de 10 ms j'entends plus de clic, au dessus de 40 ms j'entends clairement le fade, apres ca doit dependre pas mal du type de son que tu y met, des frequences surtout (les graves sont plus propices a "cliquer" que les aigus).

tanabarbier

Salut! J'avais fait des loopers avec fade in et out rapides pour eviter ca, je mettait les fades apres le lecteur et syncronisait le "in" avec le restart et le out en calculant "temps ecoule depuis le restart = temps ecoule - temps du fade". Ca marche plutot bien pour moi, sauf quand je me met a jou...

tanabarbier

Hi!
I guess that you're problem is that it is Usine that is monitoring the input, so you may want to try to see if your soundcard's program (maybe not with ASIOforall?) has monitoring possibilities?

tanabarbier

Aaaah, that's great news !!!

tanabarbier

Something I am wondering about, are the workspaces going to be compatible from version 5 to 6?

tanabarbier

And how come you ALLWAYS have a solution to everything?
Thank you!

tanabarbier

Hi everybody! I just ran into this page : http://www.spaceraiders.co.uk/sick.html where you can download a LOT of small VSTs, intended to be used in an modular environment. They are synthesis oriented (generators, filters, envelopes, mixers, etc), all made with synthedit and they sound really nice! ...

tanabarbier

Wooow sounds like a cpu eating monster, but one that I'd like to meet!

tanabarbier

I just double clicked in a blank part of a windows explorater window to go one level up, does it happen to other people too?

I know it is really stupid, but it made me laugh a lot!

tanabarbier

I think it is because using two i7 too I first thought like you but then noticed that the other four "wake up" at some point, although the distribution is not equal at all betwen all the cores. I have been looking into the same parameters than you, I don't know what changed.

tanabarbier

I can't wait to see what you will do! I have to say that I'm starting to have doubts about the usability of Usine regarding synthesis, like I said in an other post, I am thinking that there is a patch calculation time problem that keep us way above the sample timing, and so keep us from doing real t...

tanabarbier

I really like it too! Great sounds!

tanabarbier

Maybe I don't get the recurency problem, but I propose only one list with all the names of the same scale for each scale, both educational and practical?
like "pentatonic major / chinese mongolian"=661
etc ?
Anyway thanks a lot for this work, it's gonna be a HIT among the growing Usine community!

tanabarbier

Bonsoir/jour tout le monde, très interessant cette idée d'arpegiateur! Si on rentre dans la polyrythmie, il serait peut-être possible d'envisager le rythme comme une division de la mesure (comme tu fais bien le rapport à la ronde à chaque fois) mais avec la possibilité de choisir des valeurs différe...

tanabarbier

Hi everybody, As I spended some time trying to use usine for synthesis I came up with a few doubts: -Is it possible to implement a FM module that would really work? I have the feeling that because of bloc size the frequency modulation isn't quite a flow but really more like audible steps, and even w...

tanabarbier

New EQs!!!! Yeaaaaah !!!

tanabarbier

very very very interesting!

tanabarbier

Ok thanks! Good to know!

tanabarbier

Ok, thanks, and sorry for the stupid question

tanabarbier

I think you're right, it's just that the official one is a little bit more difficult to find here (Mexico, land of pirates...)

And is there a problem to use two at the same time on the same computer?

tanabarbier

Hi everybody, I'm starting to investigate this Usine and wiimote thing and I noticed that there is more than one "wiimote", has anyone had a bad experience with a specific kind of wiimote? Is there noticeable diference for a controler use? Has anyone tried with non-nintendo's wiimotes ? Or has someo...

tanabarbier

Yes I know it won't be easy...
On the theory side it's ok, my problem is more understanding how to make it on the computer...
I guess if I find out how to not need to sleep, that would be a start!

tanabarbier

Hi everybody! An oscilator module would be incredible indeed, has anyone some time to work on that? I don't know the first clue about code so I feel totaly useless in here... So my gift list for this really early christmass would be: -An oscilator module with various waveforms (sine, sawtooth, squar...

tanabarbier

Yeah!
So it is the right one, I only had to re cable betwen the array and the vst, but that's it! Thanks for this patch Nay!

tanabarbier

Well I tried as you said: fresh install and unziped files in the library directory, and the same thing that cleverconqueso took in photo with the wrong cabling...
I don't get it...

tanabarbier

That's a really cool idea! Thanks Floego for that patch! I noticed that the kick sound is from time to time starting with a "clic", but not always. I guess that it is because the sound doesn't always "start" at the begeinning of a cycle? Is there a way to control that without having to change the at...

tanabarbier

Well I tried to put the synthpack in the module/user directory, then in the library, and I also tried to put the DLL folder in the steinberg/VST/ folder... I don't get why it still is the old one... Something that seems weird to me: The synthpack 2.0 is from 2011, no? Because when I open the .rar an...

tanabarbier

It is weird, I have the same problem that cleverconqueso with the aditive synth module.
I downloaded it at least 4 times (from the add on section), even tried to open directly the dll only and it is the old one.
Is there something I am doing wrong?

tanabarbier

I can't even start to imagine what your todo list looks like... Probably more like a phonebook than a short novel... Well in this one I am using note on and note off messages to trigger attack and decay, but I think that my problem is when retriggering when not at "sustain level", or something like ...

tanabarbier

I'm really glad you like it! Oh and I noticed there is a "ring modulator" subpatch hanging arround, it has nothing to do there of course, is there a way to modify the file in the add-on section or should I delete it and then put the new one? And also, more of a patching question regarding this patch...

tanabarbier

Aaaah thank you! You always save me from my web-incapacity !

tanabarbier

Hi ! It's not answering your question but this patch I made is a 32 bars chord sequence player, so maybe you could use the "chord calculation" part (those are chords, not scales, but that's a start). I remember that I started trying with this script and then gave up and patched it with a lot a cable...

tanabarbier

Hi everybody, this new add-on is a basic synth with nice modulation possibilities, here you can check the wiki page 8thanks Nay for making it look good) http://www.sensomusic.com/wiki/doku.php?id=manual:modules:patches:sintana_v1.2 It is based on the synthayan and I use OSCs from the synthpack V2,0,...

tanabarbier

Ah thanks for that ! I tried my best with stuf like \ and ** and nothing. I might be code handicaped.
There it is as an add-on, I'll create the add-on topic.
(off topic, thanks, I actually answered you about the second mail, maybe this time you didn't got it ?)

tanabarbier

Well making a wiki page is a lot more painfull than patching, isn't it ?
I give up trying to make it look not so bad.

tanabarbier

Here is the V1.2 : sintana V1.2 The LFOs are now working, there is the possibility to ring modulate the two OSCs, and a crossfade between them too, if not using the ring modulator. Each effect has a ON/OFF, to spare some CPU. I think that in total it took me something like 10 hours, it's not that mu...

tanabarbier

Hi! Thanks for the comments! For the waveform options, yes actually I was thinking more options could be good, but I don't have any idea right now. Something with the possibility to mix between two waveforms maybe, more than just adding them? And yes this subpatch is crazy, it took me quite a while ...

tanabarbier

Hi everybody ! I thought I'd share this synth, it is inspired by the synthayan (wich is not in the synthesis pack 2 if I'm not mistaken, and it's too bad !). It has two 4 voices oscilators with an octave difference between them, then a filter, a distorsion, a granulator and a delay. The main idea is...

tanabarbier

I think it is because of the USB 3 port, is it possible ?

tanabarbier

Hi everyone, I'm trying to use a bcf2000 with usine, I know it should work but it doesn't, the device apperas in the list, and when I select it the console says "error: erreur externe indefinie" and then "error: le handle du peripherique specifie n'est pas valide". I have win7 64, and bcf2000 64 dri...

tanabarbier

Tu dois choisir entre des entrées audio au final si j'ai bien compris, donc tu peux le faire en mettant un selector (n'oublie pas de cliquer "audio/MIDI" ) et pour la liste un combobox parait être ce que tu veux. Attention quand tu ecris la liste de tes entrées dans le combobox ajoute des valeurs pa...

tanabarbier

I agree with those suggestions, and I'd like to had an other one, maybe not that important but if it was possible to unlock only the position of the patches to move them arround without having knobs and faders etc moving inside the patches ? Because when we move a whole patch inside everything move ...

tanabarbier

I think that kind of device should be available (mandatory even) for people who have a dog in an appartment, i specialy think to my neighbours and their small high pitched voice full of energy chihuahua.

tanabarbier

Oh it's from the synthesis pack by nay seven.

tanabarbier

Hi everyone, I feel like sharing this silly patch I'm working on : http://www.sensomusic.com/forums/uploads.php?file=Auto%20harmony%20synthesis.pat The idea is having some kind of auto harmony, just choosing a fundamental, a mode, a voicing, and entering the degrees with steps, then you have four vo...

tanabarbier

Yeah OSC learn is something I didn't dare to hope !

tanabarbier

So it's official 2012 is gonna ROCK !

Thanks a lot !

tanabarbier

Happy new year everybody ! Wishing all the best to the Usine comunity and long live Usine !

tanabarbier

Thanks a lot for that hermano !

tanabarbier

Oh yes that could be cool !

tanabarbier

Whaaaa looks really cool ! Of course if I had a fireface 800 I think I'd use it for sound purposes... But it seems a really good idea to build controlers with audio signal !

tanabarbier

I like it ! It's really cool ! Cheers !

tanabarbier

It was indeed a very simple thing to patch, thanks a lot, it is just what I needed !

tanabarbier

Hi,
I'd like to be able to dynamicaly change the start and ending point of looping of a steps modules, or seqswitch, without having it changing it's speed. As anyone a solution for that ?

Thanks !

tanabarbier

Ah ok thanks !

tanabarbier

Those modules that work with a number of steps and a sync, could there be a way to have a start position (in steps) and end position too ? My idea is to have a sequence and use part of it or the whole but with the speed never changing, like the way a sampler does when on loop mode and you change the...

tanabarbier

And without quantize, a lot more easier I think, this one seems to work :
http://www.sensomusic.com/forums/upload ... antize.pat

tanabarbier

First the one for quantized loops, I used the bar recorder as a base.
It seems to be working, could anyone check this ? I'm really not shure...
http://www.sensomusic.com/forums/upload ... 0fades.pat

Thanks a lot !

tanabarbier

Thanks for your answer, I might havent understood how work your patch, or I explained badly what I need, but I can't make it do what I want. I tried a bit tonight, and here is the patch : http://www.megaupload.com/?d=XGWRT4SK I'm not shure it works well, and my problem is with quantized loops, the w...

tanabarbier

Hi, I'd like to find a way to put short fades in and out at the beginning and ending of the recording of a loop, to avoid clics. I was thinking to use a ramp, starting when rec is pushed, and an other when rec is released, and a data delay to wait until the ramp ends to stop recording, any advice ? ...

tanabarbier

I've done this : http://soundcloud.com/tana-barbier/noche-buena-todo-el-ano It's a lot of fun to do a song only with usine, but it's challenging ! I realized I was depending a lot on plugins ! And here is the workspace : http://www.megaupload.com/?d=BIWZ4HXC Looking forward to hear and try other's s...

tanabarbier

I want in too ! Gonna be fun to share ways to use usine !

tanabarbier

Yes I agree, it happens in all kind of situations, but I'm looking for the one that keep me from saving my work like you said. I can save my main workspace only if I take the master track off, and then no pb, but otherwise imposible. And then I can put it back when opening and it works fine. A bit s...

tanabarbier

Hi, not realy a patching question, but I get this "Error: Internal" message a lot when trying to save a patch, a track, a workspace, and when it happens then I can't save anything more. For all the testing I've done it seems to be due to something that have to do with audio buses in my case, but how...

tanabarbier

Nice ! Thanks !

tanabarbier

Ok, thanks !

tanabarbier

Hi !

I'm looking for a way to keep pop up windows allways on top (wich they do except when you touch something on the grid with the mouse, and then you have to bring them back, and they do all at one).

Is there a way to do that ?

thanks !

tanabarbier

Thanks for the link ! I really like this, been playing with it a lot !

tanabarbier

Ce n'est pas possible de faire un "key learn" pour chaque bouton ?

tanabarbier

Bonjour !
Je ne l'ai pas essayé mais il me semble que dans les addons il y a le "mx_numeric keys" ou quelque chose comme ça, dans la section "others", de 23fx23 qui a l'air de faire la même chose.

tanabarbier

I love it ! Thanks a lot !

tanabarbier

Thanks all for listening, and coments !

tanabarbier

Bravo !
I really like both, and the one with the karlax makes this instrument look a lot more interesting to me that the previous videos I had seen with it !

tanabarbier

Ok thanks !

tanabarbier

Yes that's what I was affraid of. So no way to make preset manager exportable ?

It could be awesome to have the possibility to save and recall preset manager with specific VSTI or else, from a patch to another, or workspace...

tanabarbier

Hi,
when I try to copy paste some elements, for exemple to put them all in a subpatch, the preset manager doesn't work after moving it.
Is it normal ? Is there a workaround ?
Thanks !

tanabarbier

Aaaaaah ! What an excitment !

Is there an approximative date for the release of this incredibly waited new version of usine ?

Oh and it's a bit off topic but, if Usine 6 is 64 bits, does it mean that it will actualy be able to work with more than 3Go of RAM ?

Thanks !

tanabarbier

Hi ! Here's my last work, played live with usine, no edit. This software is really amazing ! I mean REALLY ! => http://soundcloud.com/tana-barbier/tana-narval Any comment, suggestion, advice or anything is welcome ! And last friday first show of Mr Eddy ( http://www.dogmazic.com/mr_eddy ), lot of fu...

tanabarbier

Hi, I live in Mexico and I'm starting to think about making sort of "introducing Usine" classes here, as it could interess a lot of people (all the ones I've shown what it can do, to start with). My question is about license and price : I've noticed that you offer free Usine pro for emerging countri...

tanabarbier

Bonjour, J'en utilise deux en même temps, je peux les mettre sur n'importe quel port usb (1, 2 ou 3, par l'intermédiaire d'un hub usb, d'un hub usb expresscard...) donc je pense que ce n'est pas le problème. Ils apparaissent comme nanokontrol puis un numéro, différent pour les deux appareils. Peut-ê...

tanabarbier

Aaaah ok, thanks a lot !

tanabarbier

This would work but I could have some visual feedback too ? I'd have to show tha two faders, or only the one that i sbeing used ?

tanabarbier

Hi, is it possible to assign two differents midi notes to the same fader, button, knob etc ?

thanks !

tanabarbier

Hi When two patches are one over the other in IB mode, would that be possible to have a way to say "this one is allways on top" or something like that ? As the patche's shape is rectangular, I happen to have empty space in some patches and can't get them all to fit in the screen. If one could specif...

tanabarbier

Hi !

I think this is really doable, the only thing that you'll have to worry about is the latency, but it can be really low with usine. You could even try with the free version to see how it works with only 2 ins and outs (if I remember well the limitation).

tanabarbier

Hey what a great news for Usine 6 64bits ! Thanks !

tanabarbier

Whao I have to say that if this is some day possible, I will use it a lot ! Just the idea to be able to change wiring and recall it is amazing !

tanabarbier

Hello
I don't know what the limit is, but I'm using a win7 64 with 8Go of RAM, and usine says "out of memory" when I'm about 60% use of total RAM. If there is any way to improve that, that would be best news of the year for me !

tanabarbier

I re uploaded the balls patch, it seems something went wrong with it at some point. http://www.sensomusic.com/forums/uploads.php?file=playing%20balls.zip The same here I don't know where to start with csound, and for now think I will stick to usine, there is so much to learn for me ! =>23fx23 : yeah...

tanabarbier

I just opened the two patches you've done, that's great ! Thanks ! I have to say that I won't be any help because this is going too far for me. I don't use strings and anything else that patching, and allmost only audio... But Im interested in learning, so I'll study your patches ! Yeah KT granulato...

tanabarbier

Thanks for trying those patches and giving me feedbacks ! I like the grain engine too, but this one was for me more like an atempt to do something that changes with the time, and more like trying to reproduce something between montage and micro-montage like when you spent hours cuting small parts of...

tanabarbier

Hi everybody ! Here are two patchs I'd like to share, after a few months of having fun with Usine. I don't know if it will be of any interest for anyone, but here they are ! So the first one is a kind of automatic random micro montage patch. A fader controls the size of the sounds parts it will play...

tanabarbier

You're right, it seems to be due to CPU overload, but the funny thing is that it doesn't happen with other controlers. I setted the latency of my external sound card a bit higher and it's ok.
Thanks !!

tanabarbier

Hi everybody ! I have a problem with a controleur I'm using since a few days only, the AKAI mpk mini. Te thing is that when I turn knobs fast, Usine stops for like a second, and then restart normaly. It doesn't happen with the nanokontrol or the joystick. I've also tried to use differents usb port, ...

tanabarbier

Wahou thanks a lot !
It seems that I'm never gonne be able to leave Usine aside for more than two days, and you don't help !!
thanks²

tanabarbier

I have a profire 2626 for my desktop computer, and I am not really conviced by the brand, it is indeed quite cheap and decent for the price but I have a few issues that don't help me trusting the brand. Where I live the electrical tension isn't very stable (actually it's horrible), in fact it is so ...

tanabarbier

Thanks everybody, Thanks for your ideas, actualy I'd really like to have an RME or MOTU, but it's too expensive for me right now, and to answer to Walsh I'd like a sound card because right now I'm using my laptop's one, and for it to run smoothly I have to put the latency to 2048 samples (bof bof). ...

tanabarbier

Hi everybody, I'm looking for a sound card for my laptop, and I really don't know what to choose. My laptop has a firewire 400 (mini) port, but I use it for a ssl mini duende, and anyway it doesn't seems stable as it is not a texas instrument chipset. So I was wondering should I go for an express ca...

tanabarbier

Hi ! Nice to see some people from latin america using Usine, I am myself in Mexico d.f. !

tanabarbier

Sounds really interesting ! I'd say something with convolution, for certain, but I can't say more. It seems to change the timbre and space around the sound too. But how ?

When will we have the chance to play with it ourselves ?
Anyway your teaser worked : we are teased.

tanabarbier

Thank you very much !

tanabarbier

Hi everybody

I'm trying to adjust the delay line time to the sample lenght, and to keep it adjusted when I change the pitch. I've been looking for the formula, but I don't find it anywhere...
Anyone can help me ?

Thanks a lot !

tanabarbier

Thanks for listening and giving your thoughts !

tanabarbier

Hi !

Here are two improvisations I just did with Usine :

http://www.dogmazic.net/archive/upload_ ... 368378.mp3
http://www.dogmazic.net/archive/upload_ ... 370928.mp3

I hope you'll enjoy it, and thanks for listening !

tanabarbier

So I tried also with LAATIDO, wich is supposed to enable the large adress aware function for the 32 bits apps, but it doesn't change anything either. The thing that seems weird to me is that when I check the taskmanager, it says that the memory used by usine (with the big workspace) is more or less ...

tanabarbier

Hi
I just did, and it doesn't seems to change my problem.
I guess it is due to the 32 bits of usine itself, but I don't get much of these RAM issues.

tanabarbier

Hi ! I was wondering if there is a way to make usine use more than the 3Go of RAM. I have a workspace that is knida big, and when I load it the memory use goes up to 51%, I have 8Go of RAM. It works nicely, and if I let it turn for a an our the memory use goes down to 21%, more or less. But my probl...

tanabarbier

Thanks ! I added a 2 points line, commanding the gain of a audio volume module, but it seems that the problem was that I needed to put an other data delay before the "synchro" input of the sampler, and I setted the different modules with delays at differents times. here's the fonctionning one : http...

tanabarbier

Thanks !

The sample are loaded in the memory. I'll try with the ramp line module, and the ramp generator.

tanabarbier

Hi everybody ! I'm working on a patch with several subpatchs with players, and I'm trying to find a solution to keep the sampler from clicking when I stop it, specially because after it goes through a delay, and the clicks are repeated a lot of times. Kind of ugly... I tried to make a sort of ramp f...

tanabarbier

Aaaah thanks a lot, waiting for it eagerly !

tanabarbier

Hi ! These preset key learn problems seem to have spreaded into some others patches. Now in every patch that as more than one preset manager all the remote assignations are copied from the first to all the others (first from up to down and left to right). This is quite unpracticle... Anybody as an i...

tanabarbier

Hi ! Something wierd is hapening in a patch I'm builting : It contains sample players going through an fx section and then loopers. The thing is that when I use the "key learn" (or "MIDI learn", too) fonction on the preset manager that loads differents sounds with each sample player, first it works ...

tanabarbier

They look better, but that's too bad that they removed one fader of the nano kontrol.

tanabarbier

Ok, thanks for the advices, I'll try this right away !

tanabarbier

Hi everybody I'm starting to work with usine, and I really enjoy this incredible software. Here's my beginner question : what should I choose on the CPU setting that is in "setup" to optimize the use of my i7 cpu ? I tried 4 cores and 8cores, but when I look at the performances with the "gestionnair...

tanabarbier

Hi everybody, I'm new on the forum and recently using this great² software.

I'm looking forward to see (and hear!) something with this new step that usine is for this textile interface.

This forum is a great help to start with this software, so thanks to everybody here !

Tana

Welcome to %s forums

Search found 152 matches

Login • Register