Welcome to %s forums

Fléau

For equalization purpose,
if we consider that 640Hz is the half value,
5 is the right coeff.

Fléau

you're always under V5?
interface design / fader(midi note) is displaying the note.

Fléau

patch updated :
endless.pat

i removed acceleration,
remember that knob cc is set to 79 (code 1)
right rotating value = 1 & left =127 (code 2)

Fléau

i'm not sure but it seems that the NANO do not send acceleration cc change, anyway, this patch should works. if you want to deal with knob acceleration, you'll have to measure time elapsed between two 'pass' impulse of the midi fiter module, and then translate it into increment/decrement value of th...

Fléau

you should try this:
patch

cc code 1 is set to 79 ( there is a '=' logical module to set it up)
works perfectly with the push and it is able to calculate the speed you turn the knob.

Fléau

hello,
does that really works without any big latency or drops?
&
is that really impossible to make a V6 'midi to the lan' bridge for V5?

Fléau

thanks

Fléau

senso wrote:We might also consider to create an OSC patch to send MIDI over the network directly in Usine.
Very easy to do.

so, is that the V6 "send midi to the lan" osc based?

Fléau

hi ceasless, not sure i've understood all. did you digged into my v5 patch (isomorphic keyboard)? there's around 90 scales coded in 12 lenght arrays. there is also a "array remove zero" script in in it, so if zero is the root note, concatenate with the same array +12(if it's octave based, or 'array ...

Fléau

hi,
i do not use the preset manager no more for vst,
but the vst params array input and a store array script.

Fléau

hello, i did something like that by the past,
fill the pianoroll with all your pattern (16*16) one after the other,
after that, chose the start position and the end position of the pianoroll in real time
with a fader or else.
hope this will help.

Fléau

thanks ,
i will send them that is a "faux positif" tomorow

Fléau

hello,
i just downloaded a fresh copy of usine 5.80,
and all of the matrix.usr are detected as a win32:evo-gen by avast,
does anybody hve the same issue?

Fléau

Hi, same here, i've been very busy and stopped the development at this point: http://www.sensomusic.com/forums/viewtopic.php?pid=29194#p29194 I've just implemented it in my workspace (now using touchscreen only for vst presets combobox and a routing matrix), and it works like a charm. I didn't manag...

Fléau

will give some explanation tomorow. i agree , not easy to understand, it not makes any blip, it's just an interface between usine and push. plus, i totally forget to said that exemple pages are on addeffect,addtrack,note,session,select buttons. AND 'up arrow' for the isomorphic keyboard you should u...

Fléau

an i forget that:
about color transition, it can be donne via sysex:
http://cycling74.com/wiki/index.php?title=Push_Programming_Oct13_03

BEWARE with sysex, it can do wrong thing on the firmware!

Fléau

Both, i was thinking that colors should be darker, because when setting up them, they are supposed to be at 'off' state. here is mine: push for v5.8 i'm really sorry but i can't make it works under hollyhock ( error, crashes) but it will certainly give you some ideas. -8 pages of encoders selectable...

Fléau

Neither TouchDAW or touchOSC have combobox,
at worst Lemur can have a 32 listbutton, and that isnt enough to control vst presets.
Tablet could makes every usb midi controller wifi-able.

Fléau

I forget to mension that xy axe of the isomorphic keyboard are inversed compared to ableton, because i found easier to play a chord with the left hand that way. vertical increase by tone and horizontal increase by fourth. major minor augmented diminished X 0 X 0 0 X 0 X X 0 X 0 X 0 0 0 0 0 0 X X X X X

Fléau

update: push4holly No blinking here, did you tried to restart the push? I had blinking issues only with sysex when the string lines weren't multiplexed. (seems you can makes matrix pads blink via sysex) if i can make some suggestion about your color setup procedure, -it would be better to choose the...

Fléau

thanks a lot Nay. should not it be auto wired?

About the textfield: it's a wrong wiring,
look at the 'string to sysex' patch:
the text is wired to the second input.

great!

Fléau

hello, some colors were missing: PUSH4HOLLYHOCK cc button lights: HALF =1 HALF_BLINK_SLOW =2 HALF_BLINK_FAST =3 FULL = 4 FULL_BLINK_SLOW =5 FULL_BLINK_FAST =6 OFF =0 ON =127 pad button color BLACK =0 DARK_GREY =1 GREY =2 WHITE =3 RED =5 AMBER =9 YELLOW =13 LIME =17 GREEN =21 SPRING =25 TURQUOISE =29...

Fléau

i could't resist, i bought it and started a topic.
http://www.sensomusic.com/forums/viewto ... 084#p29084

Fléau

patched some tools for push: -push pad coord to matrix index -display all colors and their velocity -rotary encoders with acceleration factor -string to sysex for lcd display (i'm not familiar with hollyhock and i didn't managed to send sysex, but it works under V5.8) PUSH4USINE PUSH4HOLLYHOCK @NAY:...

Fléau

hi, sorry for the time it tooks. here it is: launchpad usine v5.8 workspace you can select the different page with the upper buttons i've made three exemple on page 1 2 & 3 the isomorphic keyboard is on page 8 (mixer) i tried it under hollyhock: launchpad hollyhock but only page 3 works, seems to be...

Fléau

i'm trying to make a euclidean sequencer like that: http://www.shuriken.se/?page_id=97 http://cgm.cs.mcgill.ca/~godfried/publications/banff.pdf and i need to convert array value to position ex: array of 4: 0.4.8.12 to an array of 16: 1.0.0.0 1.0.0.0 1.0.0.0 1.0.0.0 does anybody have an idea? (patch ...

Fléau

Ok, reinstalled everything. Last time i've saved this workspace was in may 2013, so it seem a bit esoteric for me now. i've started to understand how i did it and to correct some little bugs. After that i'll have to make an exemple patch (launchpad decoder/encoder is ok, but all the little slaves pa...

Fléau

hi,
my computer is out of order for the moment, i should receive a new hard disk tomorrow,
so i will isolate this patch for this week end.

Fléau

hi @ceasless, i've done it, it's a tiny part of my launchpad patch, shouldn't be easy to isolate it; i may have free time to do it in two week. @hesspet: that's for rescale individual notes or outpout chords? did you tried my midi scaler? (the visual interface (white and black keys) is read only but...

Fléau

here it is:
DEC2BIN patch
not tested in hollyhock, but there's no reason it do not works.

Fléau

yes, same for me, cannot migrate my workspace to hollyhock for the moment. I was waiting a bit before asking Caco (everybody have tons of thing to do with hollyhock for the moment). I had patched it by the past, will try to find it, was more cpu hungry than the user module, but it will help to wait!...

Fléau

heavy bug found and corrected,
new file uploaded

Fléau

16.5M file, certainly due to the 64 preset manager: http://www.sensomusic.com/forums/uploads.php?file=vst%20manager.pat 1st step: open the patch open a subpatch/vst slot http://www.sensomusic.com/forums/uploads.php?file=tagged%201.jpg 2nd step: open a vst and wire it like that: http://www.sensomusic...

Fléau

Question gestion de l'array: parfait; à savoir que, comme je t'expliquai, vu que tes 'set value' sont toujours à l'état 'on', la boucle n'est pas nécessaire. Maintenant si tu utilises un seul 'setarrayvalue' pour plusieurs valeurs (en changeant l'index) et en mettant ponctuellement l'entrée 'setvalu...

Fléau

ça dépends des cas, difficile à expliquer, je te réponds demain.

Fléau

si tu choisis '4 ball max' tu auras un champ 'nb ball' que tu mets à la valeur 3, çà t’évitera des manipulation d'array donc moins de modules. dans ce cas, je ne suis pas sur que le bouclage soit nécessaire vu que tes entrées value sont toujours alimentées, par contre il faudrait te repiquer en sort...

Fléau

salut arnaud,
quand tu as deposé ton 'xy pad' dans ton patch, tu as choisi 'array input mode'
si tu choisi '2 ball max' tu auras 2 entrées 'pos x1' et pos y1' qui sont des entrées qui vont de 0 à 1

Fléau

hi percuson, it seems to work perfectly, thank you! i have tons of things to do until next week, so i will patch it slowly, will keep you informed as soon as possible. edit: the 'no selected items' function is great i don't have to patch the 'no matches' function in case there is no preset correspon...

Fléau

for sure,
take your time,
i'm only at the first stage: planning and thinking about the better solution.

Fléau

if this script was modified to one commatext ouput instead of multiout text, it would be perfect: ideally: a listbox input, an array input and a list box output. for example: listbox input is: a,b,c,d,e,f,g,h,i,j,etc array input is: 0,1,3,6,8 result is: a,b,d,g,i with this it will be very easy to ad...

Fléau

i've found an old bSork's script that could do the job, but i need some quick help from a script guru this script output x textout and i'd like to have a concatened commatext of each output. could someone help me? (*********************************************************************************...

Fléau

Hello, i'm about to patch a preset manager, i actually use a 1024 matrixcombobox with 10 vst but it begin to be dirty and muddled. my idea is to make someting like bigtick zen with more than 128 slot zen webpage i want to be able to sort preset by synth/instrument/genre. for the moment i'm only thin...

Fléau

i think i've found the matter,
replaced:
//setvalue(value,getDataArrayValue(Arrayin,memIDs[m]));
setvalue(value,memVals[m]);
by
setvalue(value,getDataArrayValue(Arrayin,memIDs[m]));
//setvalue(value,memVals[m]);

now working on my patch.

Fléau

Sorry noise2sine,
even after 2 hours of investigation, i can't find the problem.
so you should use the first one i've uploaded.

about the 4 bar random action, it only depends on the script and i'm not able.

Fléau

hello,
23fx23, did you found the solution?

Fléau

hi,
another way to do it (not in real time, less cpu) :
http://www.sensomusic.com/forums/uploads.php?file=events05.wkp

Fléau

here is your patch with a real time scaler:
http://www.sensomusic.com/forums/uploads.php?file=events04.wkp
but i think it would be better and more efficient to randomize only scaled notes.

Fléau

my tought was keeping the octave with a div12 like you, but not filtering the randomized notes: randomize (rnd 1 to 7 for ex)and remap according to the scale array then add the octave. (remapping non authorised notes is a bit tricky) i use just a combobox and the 'dec to bin' module to store a lot o...

Fléau

Hello, @noise2sine: I think i can patch it, would you prefer to randomize notes from a chosen scale or from a scale made from initial notes? (how many notes in general? more than one octave?) @23fx23: i did this by the past with a get matrix column but matter comes when you have a huge pianoroll arr...

Fléau

Cool one, but i have a special request:
I really need a slave one for my novation launchpad patch,
please, could you take a few minutes to add a "memtypes" array input?
That would be great, thanks in advance.

Edit: forget it,
was really easy and simple to patch.

Fléau

Bonjour noise2sine, si il s'agit de 'recadrer' les notes n'appartenant pas à la gamme, il faut que tu utilises uniquement le subpatch 'note scaler' qui possède entrée et sortie midi, tu n'auras plus qu' à choisir ta gamme et tes paramètres ( je te conseille 'down' et 'closest note'). Si tu as d'autr...

Fléau

çà?: http://www.sensomusic.com/forums/uploads.php?file=WKPessoa.wkp Pour ce qui est de l'arpègiateur, je suis en pleine refonte basée sur une nouvelle version du générateur d'accords: sur l'ancien on choisissait le type d'accord voulu, sur le nouveau on choisi la gamme voulue ex: choix: gamme DO maj...

Fléau

Désolé de n'avoir pas été plus réactif, j'ai été très occupé ces derniers dix jours, et le peu de temps disponible a été consacré à un séquenceur stochastique. J'attendais d'avoir un maximum de retours et de tester moi même pour corriger les bugs. j'ai trois ou quatre jours de libres devant moi, je ...

Fléau

Seem to works perfect (for me)!
Leaving for the weekend, so i will test it more on monday,
now able to share a 'midi stochastic seq' in my midi harmonizing tools patch.
Thank you caco.

Fléau

Je n'ai pas beaucoup de temps pour me pencher sur la question,
pourrais tu partager ton workspace pour que j'y jette un coup d' oeuil la semaine prochaine?

Fléau

Does anybody know an efficient and CPU friendly way to shuffle an array,
like 1/2/3/4/5/6/7/8 to 6/4/5/2/3/1/8/7 (inverse of the 'sort array' module)?

Fléau

download: http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.wkp Une erreur de gamme dans la base de donnée des accords: corrigée. Un bouton 'key feedback' sur le 'note scaler' (qui rendra plus intéressant le random tonal). Un générateur d'accord et d'arpège à cadence modulée. Vos s...

Fléau

download: http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.wkp Corrected a scale mistake in the chord database. Added a 'key feedback' switch on the note scaler. Added a chord player and a arppegio player with modulated speed. I'm near to upload it in the addons, so all suggestion...

Fléau

Dernière version avec le détecteur d'accord. download: http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.wkp http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.jpg maintenant je m'attaque au lecteur d'accords triés par gammes, accords autorisés par gamme (gamme maj...

Fléau

First, a lot of thanks for those scripting help. Here is the new version with the chord detector: download: http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.wkp http://www.sensomusic.com/forums/uploads.php?file=midi%20harmonizer.jpg Next step is isolating chords according to a sca...

Fléau

I'm about post the latest version but scripting make me sick var input : Tparameter; var output : Tparameter; var transpo : TParameter; var voices : TParameter; procedure init; begin Input := CreateParam('In',ptMidi); Output := CreateParam('Out',ptMidi); transpo := CreateParam('t...

Fléau

Got it!:) BEGIN r := -1; IF (((lenA - startA) >= lenB) AND (lenB > 0)) THEN BEGIN b := 0; // bx := GetDataArrayValue(pArrB, b); THIS LINE (42 i think) FOR a := startA TO (lenA - 1) DO BEGIN ax := GetDataArrayValue(pArrA, a); bx := GetDataArrayValue(pArrB, b); HAD TO BE PLACED HERE IF (ax = bx) THEN ...

Fléau

@bsork:
I've found a better solution to compare chords, using your 'array find' script,
but it don't work with my array and i can't find why.
here is the workspace:
http://www.sensomusic.com/forums/upload ... %20bug.wkp

Fléau

C'est ce que j'avais prévu de faire au début, mais au delà de trois notes il commence a y avoir des exceptions, et il aurait tout de même fallu créer une base de donnée pour sortir les gammes correspondantes. Je vais quand même faire un essai rapide de ce coté là. La version actuelle (en cour de net...

Fléau

Ok it works,
my patch was taking 0.04% cpu
caco script 0.03%
bsork script 0.02%
need to repace them all, and then 'chord detector' will be finished (it works yet)
many thanks!

need your advice:
should i make restricted scale list or should i patch a switch to chose between restricted/educational?

Fléau

The only problem is the behaviour of the list/combo boxes when using text/value pairs, as it will jump to the first item with the chosen value when the value is repeated.. agreed Confusing, but in this case educational, as you learn that scales with different names are in fact alike.. That's why i ...

Fléau

It is monophonic just for the test, when scale and a key are selected you can only play degree I II III IV V VI VII, When the chord detector will be patched you'll be able to link the tonic key to the root key, and it'll be polyphonic. Not sure to understand, but it may be possible with a dual chord...

Fléau

Yes, efficient way.
I remember that module is yours, it was me and my sister (berenice) who asked for it.
That's a great module!

Fléau

Quelques nouvelles fraîches: Un petit bug dans la conversion décimale/binaire des gammes (un array a taille dynamique, donc un gamme erronée lorsqu'elle ne contenait pas la note 'SI'). Corrigé, download: http://www.sensomusic.com/forums/uploads.php?file=midi%20note%20scaler.wkp La base de donnée des...

Fléau

Hello usiners, let's talk about a project that started in the french forum: http://www.sensomusic.com/forums/viewtopic.php?id=3402. actually there are 3 goal for this patch: 1- rescale a midi note to chosen scale (major,minor etc) 2- detect a played chord (ex major,major7,minor,diminished...) 3- pla...

Fléau

Ok donc si j'ai bien compris il s'agirait de changer la cadence/vitesse de l'arpège à chaque mesure, voire chaque nouvelle note jouée, dans ce cas ça va être très facile. J'aimerai finir la partie accord avant (que ce ne soit pas réduit au accords que j'avais proposé au début et qu'il y ai matière p...

Fléau

Merci, toutes les suggestion sont bienvenues, ok pour les accords, par contre: - je choisis : pour le premier temps : un triolet de croche / le deuxième temps 4 double croches / troisième temps 2 croches/ quatrième temps une noire. c'est du chinois pour moi, pourrais tu m'expliquer cela d'une manièr...

Fléau

@ Nay: prévu, dés que j'ai fini le sorties monophoniques supplémentaires.

Rien à voir:
Le compte "Berenice", c'était ma sœur et moi, elle est partie vivre en Australie, notre projet est en standby;
je créé mon propre compte demain.

Fléau.

Fléau

Voila la première version: download: projet scale/harmo http://www.sensomusic.com/forums/uploads.php?file=scala.jpg @ jeanrene: il y a quand même pas mal de doublons, mais quand on en sélectionne un dans la listbox c'est le premier dans la liste qui s'affiche. Pas mal pour les gens comme moi qui ne ...

Fléau

merci pour le tuyau du script midi polyphony, la refonte et simplification du patch de moody avance bien, juste un traitement ou je bloque: j'ai un array de 12 ou je voudrais éliminer les zéros et réajuster sa taille dynamiquement, example: http://www.sensomusic.com/forums/uploads.php?file=Untitled-...

Fléau

J'ai une semaine très chargée question boulot, donc j’espère avoir dégrossis d'ici le weekend prochain. Question stockage: çà marche impec, tout est mis dans un combobox façon: Major=2741 Minor=2733 Harmonic Minor=2477 Melodic Minor= Ionian= Aeolian= etc. J'ai juste du mal a croire que les 91 modes ...

Fléau

Je suis dessus, je m'inspire du "Note Scaler" de "moody33", je recopie les 'scales' du vst "W2 harmonizer 7aliens" (91 au total! je réfléchis sur un moyen de les stocker : sous forme de notes autorisées (ex: array101011010101) , donc certainement une conversion binaire vers décimale (ex :2741). Je t...

Fléau

@ multiphone:
could you give us some feedback?

Fléau

J'ai acheté le dell st2220t, je le préfère à mon ancien acer t321h, consommation de 200mA au lieu de 500mA sur le port usb, mieux au niveau des ghost point, hub usb parfait pour les petits contrôleurs midi , et je pense que le matériel dell sera plus robuste (l’écran acer a cramé 3 semaines après la...

Fléau

I had the same issue with a kaosspad driving a scratch-looper: i remember that it happened less often with midi monitoring option off, you can try to use the dashboard with a 'reset all midi device' button ( like a panic button) cause i remember i had to switch my midi input to 'none' then set it ag...

Fléau

J'ai l'intention d'acheter le dell demain, est-il bi touch?
Sinon, avez vous un avis sur le iiYama - ProLite?

Fléau

je déconseille le acer, la fonction tactile est morte sur le mien
( deuxième produit acheté chez eux qui tombe en panne trois semaines après la fin de garantie...)
j'hésite entre le samsung et le dell, quelqu'un a-t-il testé ce dernier?

Fléau

Found the solution,
the script is ok, was the "PR_OUT" fader with a max value of 255.

Fléau

sorry to harass you again 23fx23, we need to do the same (512) for '256PRESETS_MX' it would be great if you give us the entire code again, but i prefer you give me (fleau) the lines to be replaced (i'd like to understand :cool: ) thanks. edit: working on preset rating with something like 'concat str...

Fléau

Working well now, the problem with the precedent version was if integer was 128, 64, 32, 16, 8, 4, 2 or 1 the result was the same: a 1 at val1 output and you had to decode it with the array size. CPU now at 0.02% in the same workspace ! now able to easily make cheap "midi" controller in usine Nice o...

Fléau

yes caco, that's it, and it's more cpu friendly. but it can't works due the the fact the array is resized dynamicaly: the first array value is the last bit, so two solution here: a static array ( 8 output ( 128 64 32 16 8 4 2 1)) and it'll work, or inverting the order of the bits ( first array value...

Fléau

Thanks 23fx23. So you mean that if i have a 10% global load of CPU, 2.5% in the patch is 0.25% of cpu? I don't think it can be done with bit operator. here are two method: http://www.wikihow.com/Convert-from-Decimal-to-Binary i did this patch with the second one, will try with the first one but it s...

Fléau

Hello, I'd like to isolate all the button from a hid device. Made this solution and it work: http://www.sensomusic.com/forums/uploads.php?file=AN%20conv.jpg BUT the cpu can raise 2.5% !!! that's too much for a simple A/N converter... Maybe i've missed an existing module? Did someone scripted somethi...

Fléau

Thanks a lot, had to recompile+ init ( not just reload), and it works. If the matrix had some more inputs than colors: like bitmaps, this patch would be wonderfull (you could put some "stars" to give a 'rank') but color is enough. (Merci 23fx23, tu m'enlèves une énorme épine du pied, merci aussi pou...

Fléau

Hi usiners, i'm using the "256 preset manager" that i pulled to 512 on my slave computer (and it work perfectly for a vst with no program change). To drive it via OSC on my master computer i use that wonderfull "MX combobox" , but i do not manage to make it works with 512 slots: in the script, i cha...

Fléau

ok, i've never noticed and used those master section patch...
(i have just used a 'constant' module wired it to the 'on' input, and it work well)
thank a lot!

Fléau

it do not work,
work only when audio engine is started.

Fléau

i want to use a second computer connected via osc,
with no screen, no keyboard, etc...
like an expander.
so, it have to start usine on boot with autoload workspace, no matter here;
the problem is the audio engine is always off after loading,
is there a way to autostart audio engine?
thanks.

Fléau

it's supposed to receive the audio/midi clip lenght ang warp/loop infos if there is a clip. found it: http://www.sensomusic.com/forums/uploads.php?file=liveosc%20clip%20bug%201.jpg the LV_SELECTCLIP sendbus is based on clipsnb/selectrack/scrollx getbus, i think it should be scroll Y. so, here is a ...

Fléau

hello, i've found a problem on the clip/loop button:
it send osc on this adress: /live/clip/loopall
but do not receive anything at all,
i'm totally newbie with osc and python, how can i resolve that?

thanks,
bérénice.

Welcome to %s forums

Search found 95 matches

Login • Register