Welcome to %s forums

Ken29

Hi Guys,
I had this problem too. With the GRM V3.8 and HH4 on PC, the GRM tools work fine.

Ken29

It works except you have to plug the "Midi In" Sysex out to the "Filter" midi In, else you will never trigg the filter...

Ken29

Good guess 23fx23, the midi filter detect the Sysex. The patch works,I now have 3 on receive and 0 otherwise. Previously, because of the null between the sysex messages, the output of the Display Array was never changing when I was hitting several times the same button... Best http://www.sensomusic....

Ken29

Thanks for your answer, but for some reason, "Is Null" doesn't see Sysex messages as datas and the Null output stays on "1"...

PS : it is not totally exact, on time on twenty Sysex hits, Is null detect it.... So strange...

Kenan

Ken29

I made a bug report to Senso, he will certainly explain if it is a normal behavior or not...

Cheers

Ken29

Hi, this is a good one, how do I detect Null data ? I explain : I have a sysex message coming from a machine remote. Only the fourth digit matters. I have one button play and I want to use it as play or pause. It's clear in the data flow, there's no signal [-1], between two hits, but this Null data ...

Ken29

Thanks Zucchi, I think your idea doesn't work because in remote mode, you don't need any midi input... But my patch is now finished and works perfectly, Usine is an OSC-midi interface between and old Sony R100 desk (used as a remote only) and Reaper. Reaper follows the controller, and the controller...

Ken29

I made a quick test with a simple patch. I just used a key learn on a switch and set "if patch is on". If you cut the patch with the green button in the header, the remote doesn't work. If you just use the on-off patch, the remote still work. Hard to say if it is a normal behavior or a bug. Cheers K...

Ken29

Hi dudes, I want to control 2 patches with one motorized remote controler, but never at the same time. In the midi learn page, you can set "active mode if patch is ON". I thought it was an efficient solution except I can't figure out how to enable or disable my patch otherwise than manually pressing...

Ken29

Thanks Oli,

Thanks for your answer. I finally did it another way, I created a sub-sub patch in my sub-patch, I design the layout on the sub-sub patch and then I force reoganization on the sub patch...
Kenan

Ken29

Hi Guys,

Each time I apply poly (not apply and reset), the lovely layout which took so much time to set is squashed into a pile of icons in the corner of my patch. Is there's any way to avoid this ?

Best

Kenan

Ken29

Oh great, so simple...

Ken29

Hi Guys,

I'm back on Usine for some new projects.

I'm trying to set values in an array.

When my index is 0, it works perfectly, but other index numbers I can't send any value. Any ideas?

Ken29

That's weird,

In the object "create Midi", you can choose "MTC quarter Frame", but I don't know how to feed data 1 and 2...

Kenan

Ken29

Hi Guys,

I didn't find out how to send Midi Time Code to my midi device with Usine as master. Any ideas ?

Cheers

Kenan

Ken29

I found it ! So simple : I used the unpack option of the midi input...

I love Usine !!!

Kenan

Ken29

Thanks Oli,
Hum, I'm trying to figure out your proposition but without any filtering, whatever the CC channel, all the incoming datas will go out to all the OSC addresses at the same time.
I have 48 faders and 48 pans and each one has to go to a single OSC address.

Ken29

Hi Guys, I intend to turn an old Sony DMX R100 (digital desk with midi functions) into a super remote for Reaper. Usine is used to change the Midi CC into OSC signal. It works pretty well when I move on fader at the time but it doens't when I move two. Here's a part of my multivoice sub patch. When ...

Ken29

Hi Olivier, Well, The DMX doesn't have any remote mode ! I can only use Control change parameters... That's probably why I can't use the motorized option. The purpose of this is to use the DMX has a remote for Reaper. I intend to use Usine as a Midi CC to OSC converter... Cheers PS : BTW, if someone...

Ken29

Hi Guys, I'm trying to use a Sony DMX R100 (a nice digital desk with 24 motorized fader) as a remote. The Sony is connected via MidI IN & OUT of the RME Fireface UC I'm able to control the DMX faders with a Create midi patch, I can trace the Midi Out and it goes to the RME I'm able to control a fade...

Ken29

OK folks,

Here's the end of the story, I've finally got a PC for my project, same patches, same VST, it works like a charm...

Cheers

Kenan

Ken29

A great project with a lot of Usine and great musicians !!! Erwan Keravec Conception, Cornemuse, trompette à anche, électronique. Philippe Foch Batterie, percussions Hélène Labarrière Contrebasse Raphaël Quenehen Saxophones Kenan Trevien Traitements, Spatialisation www.erwan-keravec.eu/activite/blin...

Ken29

Hi,

The old Mac is now Up to date with El Capitan. I Still experience serious freezes. I saved the log files when it happened, I'd be glad to know what's wrong with this Mac.

http://www.sensomusic.com/forums/upload ... le=Log.rar

Cheers.

Ken29

PS:Mac OS is 10.6!

Ken29

Hi Guys, I usually use a PC to run Hollyhock (without any problem), but the production I'm working with at the moment gave me a MACBook Pro and a fireface 800. This afternoon, Hollyhock 2.0.081 freezed 5 times, is there something to check on the mac or in Usine setup ? Where can I get the crashlog t...

Ken29

Hi,

The festival Electrocution will occur in Brest in two weeks.

Dedicated to electroacoustic musics, there will be several concerts, conferences and workshops .

I will lead a workshop about Usine with a live musician the 30th of March at 2 pm !

Kenan

Ken29

Thanks Yann,

I found the "find in patch" ! Concerning the layout grid, unless there's a specific reason, it might be cool to have it in the IB.

Cheers

Kenan

Ken29

Thanks !

Actually, I was trying to do this in the IB, and I couldn't find the option... Same problem with "find in patch", couldn't find it...

Many Thanks

Kenan

Ken29

Hi guys,

This question might be stupid, but I was enable to find the grid size parameter to edit layouts like I did in the previous version of Usine...

Cheers

Kenan

Ken29

Ken29

After a couple of tests, it seems to be a bug... I'll report it.

Kenan

Ken29

Hi guys, I have something weird with the grid. If I simply open the audio file player workspace. The option "play and replay" is chosen. In that case, each time I press on play, the file is played from the beginning. Now, it I put my rack in the grid, I create an automation on the play button, "butt...

Ken29

Il y a celui là aussi

http://www.focusrite.com/answerbase/en/ ... hp?id=1071

Ken29

Hi Yan,

Well I experience it once more with files in the sampler, Usine doesn't relink the file ! Cheers

Kenan

Ken29

Well, you can use it, just quote, the show and the choreographer.
The next one is : http://www.cirm-manca.org/actualite-fiche_737.htm

Cheers

Kenan

Ken29

Et voila, Usine à Musica :

Cheers

Ken29

Ok,

I had been able to do it that way and to find the original path, but I can confirm that Usine is unable to recreate links for files in the sequencer even if it looks in the good folder.

Cheers

Kenan

Ken29

Hi guys, I have this patch in my laptop, I made different versions, moved it several time, and at the end when I cleaned the laptop and opened the patch, Usine was unable to open my audio files. The sound folder I kept was probably the wrong one. Usine search in the disk without any success. I chang...

Ken29

Ok, I'll think about it...

Kenan

Ken29

Coming soon, very soon

http://www.festivalmusica.org/manifestation/voir/1407

Cheers

Kenan

Ken29

Thanks for the answers guys !

Actually, it is for a single concert, the BCF 2000 is a great idea, I can easily have one lent for this concert.

Cheers

Kenan

Ken29

Hi Guys,

I'm looking for a good (cheap and reliable) midi foot switch (on/off). Any idea ?

Thanks Mates

Kenan

Ken29

Hi,

I called the GRM tools support, they will contact Senso to see how they can solve this. It sounds cool, Olivier always have solutions.

Cheers

Kenan

Ken29

Hi Guys, Maybe some of you use the GRM Tools V3. Some of them are multichannel : doppler, delay... The thing is when I import a GRM VST in Usine, the VST always appears with only 2 outputs even if my track has 4 outputs... For instance, when I do it into Reaper, the number of output of the VST is au...

Ken29

Hi Mates,

I designed this stuff with Usine, It works like a charm.

Cheers

Ken29

Thanks for the answers, I might try vvvv. At the moment, Olivier has implemented in a new version of Usine the possibility of hiding the messages wich is enough for me.

Cheers

Kenan

Ken29

The patch is designed for a 3 weeks exhibition with new samples recorded all along... The solution would be to buy a dual display graphic card but I have no budget and the computer is featured with old AGP an PCI Slots... Has someone ever tried, 2 graphic cards on the same mother board ?

Kenan

Ken29

Hi guys, I resampled my video to 1024 x 768 wich is the proj matrix, it really improved the quality. I had another pb, apparently, Usine doesn't seem to like >1go video files, after 1go, Usine stop reading the file and the last part of the video is black. I had to reduce the quality of the video. No...

Ken29

Hi guys, I work at the moment on an installation with sound and video. My video file in an .avi H264 720x576 and I use a projector (1024x768) with a 4x3m image. If I play the video with the media player, it is very clean, if I play it with Usine, it is dirty and pixelized... Any idea ? Cheers PS : I...

Ken29

I guess I will have soon a training with the master...

Kenan

Ken29

Hi,

Here's a real serious document for 5.1 installation : http://www.dolby.com/uploadedFiles/zz-_ ... Mixing.pdf

Cheers

Kenan

Ken29

Hi guys,

I made a recording of a small live piece based on an old Pianet T Honer and Usine. No samples, events occur in real Time !

It's there : http://soundengineer.eu/sound-design/divers

Cheers

Kenan

Ken29

Hi,

You can use the driver asio4all (freeware), it allows you to use your internal sound card with all the asio hosts ...

Kenan

Ken29

cool...

Ken29

Done !

Ken29

Hi guys, I designed a small tool. Basically, I transformed a wave displayer to a vu-meter and I kept the loop function to make two adjustable thresholds... there's also the actual level and the maximum peak (can be reset with a simple click) Enjoy Kenan http://www.sensomusic.com/forums/uploads.php?f...

Ken29

Hey,

That:s so funny. I teach at Brest University in Master "image et son". One of the matters is "Sound in live shows" and I've used that picture for years to illustrate contemporary concert with real time transformation, even before I heard about "usine".

Kenan

Ken29

Hi, It can work that way with the callback procedure, Cheers // parameters declaration Var InA :tParameter; Var OutA : tParameter; // initialisation : create parameters procedure init; begin InA := Createparam('Go', ptdatafield); SetIsOutput(InA, False); OutA := Createparam('Resultat', PtButton); Se...

Ken29

Thanks a lot chap, That's very interesting... Indeed, I was distracted and wrote "if (n1=1) " instead of "if getvalue (n1)=1", now it works as expected... I haven't been programming for 20 years, and I had forgotten how fun it is. I forgot almost everything, so I have to search a lot on the web, and...

Ken29

Thanks Bjørn, Well I tried and failed... One question, what kind of unit is "(timeMs - startTime)", seconds, milliseconds ? What is the difference betwen Time and TimeMs ? Here's what I did : I wanted to have my output on 1 for few seconds but it doesn't work... Thanks Var In1 : tParameter; Var OutA...

Ken29

I guys,

In a script, I need to wait for a few seconds but the TurboPAscal function "delay" doesn't seem to exist in Usine, neither Incsecond or IncMillisecond (IncMonth does but useless in that case)... How could I get a pause in my Procedure.

Thanks

Kenan

Ken29

Ok, I changed my script like this and it works now... Thanks ////////////////////////// // Test ///////////////////////// // parameters declaration Var InA : tParameter; Var OutA : tParameter; // initialisation : create parameters procedure init; begin InA := Createparam('Entrée', ptButton); SetIsOu...

Ken29

Hi,

You're right, I've just add a switch to a toggle and tried. When the switch goes to 1, toggle out should be 1, then the switch goes to 0 and then to 1 again, the toggle out should be 0. But it doesn't work and I don't understand why.

Kenan

Ken29

I guys, I'm trying to get better in the art of scripting. I have this problem I do not understand... http://www.sensomusic.com/forums/uploads.php?file=Patch.jpg On this simple patch, when the "switch" change from 0 to 1, "data out" change from 0 to 1 but not the Toggle... Here's the script. Thanks /...

Ken29

Too Bad,

Thanks for the answer...

Kenan

Ken29

Hi guys, I work on a script at the moment and I need to get the file names of a directory. I tried to use this : var searchResult : TSearchRec; begin // Try to find regular files matching Unit1.d* in the current dir if FindFirst('Unit1.d*', faAnyFile, searchResult) = 0 then begin repeat ShowMessage(...

Ken29

Hi Guys,

I was wondering when you use the random save in the sampler, how the name of the file is generated ?

Kenan

Ken29

Hi, I've recently changed my Laptop. Before under windows XP and my Motu 828 MKII I had no trouble and I used 192 samples buffer. Now, with my new laptop and Win 7, I have many drop out. The Motu's drivers a really known for being crappy and buggy. I've asked some more information to the motu's tech...

Ken29

Thanks mate,

Looks great !

Kenan

Ken29

Hi guys,

I made a test with my files in memory. I discovered that the whole list of the player is charged in the memory. It's good to know...

Kenan

Ken29

Hi guys, I had a show yesterday, very simple, just launching stereo sounds with Usine. I had a glitch, the sound stop for a half second, clicked and start again (just one time in a one hour show). It really hard to know where did it come from (a bug, laptop, HD, sound card, power supply). Anyway I w...

Ken29

Hi Guys, I was so happy with my old Toshiba Portege M200, I've recently bought a Portege R700. This hight end laptop has an interesting feature that protects the hard drive and your data. In case of a too big acceleration, the HD heads are parked for a while... The point is if you read a sound from ...

Ken29

Thanks, It's a bit more clear. I also found this in French, it is very interesting. http://www.unilim.fr/pages_perso/jean.debord/math/fourier/fft.htm If I understood correctly, It says in the particular case of an audio signal, The Real Part and Imaginary are redundant, in that case, you can use onl...

Ken29

Ok,

But I still don't understand why there's an Imaginary part ( or Phase)> On the schema above which is the result of a FFT, there is just the frequencies on the first axis and the amplitude on the second. What does the phase represent ?

Kenan

Ken29

Hi guys,

according to the schema above, is the real part for 0 to f and the imaginary part for -f to 0 ?

Kenan

Ken29

Hi guys, I have several questions about the FFT in Usine. Is there any window used before for the conversion (rectangular, Hanning...) And most of all, I don't understand why there is a Imaginary part after the conversion ? I thought, in a 1024 line FFT, 513 where kept as shown below. But in that ca...

Ken29

Hi Joffo, Well, it's hard to say. I like to create my own tools, thus I can easily modified them according to the current project. Needs change all the time. But in Any case, it has to be 200% reliable... Concerning the current show, I've been using Usine every evening for 2 weeks now, and I didn't ...

Ken29

Hi,
It works perfectly now, thank you very much...

Kenan

Ken29

Hi,

Thanks for your answer. Unfortunately it doesn't work as expected. The whole string is getting out of the script. I'll have to search in my archives books about Turbo Pascal and relearn this language...

Thanks

Ken29

Hi guys, I find this post very interesting, but I'm not familiar with scripts and I don't know how to use this information. I tried to copy this in an empty script but I had a couple of errors. If someone can help me. Thanks Kenan // Full Unit code. // -----------------------------------------------...

Ken29

Hum, I'm stupid, I've just found the 'recall' outlet...

Ken29

Thanks for the explanation Olivier, It's good to know. A nice improvement would be a data outlet who send a signal when the recall procedure is finished.

Cheers

Kenan

Ken29

Hi guys, I have the impression the Conductor is quite slow to recall all the parameters. I tried to measure it with this patch. http://www.sensomusic.com/forums/uploads.php?file=Conductor%20Latency.jpg In memory 0 the switch is off In memory 1 the switch is On When I recall memory 1, the toggle box ...

Ken29

Hi Mat,

The conductor isn't necessarily global : on the top of the window patch, you can find a "conductor isolated" switch which inhibit the conductor action. Else, you can use a presets manager in your patch.

Cheers

Kenan

Ken29

Well,

I found the something funny, If the location is "memory", the sound is OK, but if the location is "file" (you need to set file and then load a new sound), there's a lots of clicks...

Kenan

Ken29

Hi, well, I tried the patch Ethnics73 proposed for a pause solution but the fact is it doesn't work... Actually, this patch is like connecting Pos out to Start pos In ( with an exception at the end of the file) but that is what I mentioned above, you can't do it because it disturbs the sound. Kenan

Ken29

And the sampler is now glitchless !

Thanks

Kenan

Ken29

If some are interested, the show "Rue St Denis" plays in Paris from march, 24th to April, 17th at "l'épée de bois, la Cartoucherie, Vincennes" The Sax player is Joonatan Rautiola, a young Finnish guy finishing the CNSM, the composer is Patrick Marcland... I've been watching the work of Joffo78, it's...

Ken29

Hi,

Thanks for this pause solution.

About the export, my patch is quite complex with many presets... The only exported files are the ones which are loaded.

Kenan

Ken29

Well, It's good to know the zero crossing is CPU greedy, I'll take care specially with my old laptop... Thanks, Nay seven, but the question was rather " why does my solution doesn't work ? " I'd just like to understand. I tried to export the workspace but it didn't work in my case... Maybe the idea ...

Ken29

Cool...

Ken29

Hi guys, I had my first show using Usine. It was theatre with a Live saxophone. The sax triggers (home made wireless system) some 4 tracks samples and some effects... There's also some sounds I manually launch. Usine has been a great tool for that ! http://www.sensomusic.com/forums/uploads.php?file=...

Ken29

First : Why the "zero Crossing" option seems to work only with start and stop pos and not with the pos request ? "" Secondly : Is it possible to use relative paths for the sound files like " \my patchsoundbass.wav" instead of "d:\my patchsoundsound.wav" in case I want to set my patch in an another f...

Ken29

Hi guys ! I'm back home and I,ve found the new Usine release... That's great ! I made a test with the patch above. Well, it's really better but there's still a glitch and I'm now able to reproduce it all the time. The sound is not played the same way the first time and next ones (if you reload the p...

Ken29

Great, I'm looking forward ! I'll keep you posted.

Kenan

Ken29

Hi Chaps, Ok, I built this patch http://www.sensomusic.com/forums/uploads.php?file=patch%20ken.jpg You can download the workspace here . I use the Usine demo file Bass11 Here's the facts on my laptop : I open the workspace, I click on play on Track 1, I almost all the time have a click. Same problem...

Ken29

Thanks for the answer...

I tried but it didn't work.

I also tried with another sound card, same glitch.

Ken29

Hey, It's getting really wired. I made many tests. Finally, I sometimes have the problem in "memory" position but less On my actual patch which is quite complicated, I can reproduce the problem all the time. I built this very simple patch : here I have the same problem but if I restart Usine, it som...

Ken29

Sorry guys,
I said something wrong, it occurs that it only happens when the sampler is on "file" and there's no click on "memory"...

Kenan

Ken29

You Can find a picture of the players part of the patch here : http://www.sensomusic.com/forums/uploads.php?file=Clipboard01.jpg (There's always a long time between the "File add" and the "play") I trigger off the player with the mousse. I'm able to reproduce it on several files but I suspect to hav...

Ken29

Hi Guys, Here's today's subject : I have to trigger off some samples that start quite sharp. The point is sometimes, I can here a click when it start. Probably, the sample does not start at 0 but few milliseconds later. I use the sampler of course, I notice I have the same problem reading the file f...

Ken29

it works perfectly as expected !

Thanks

Kenan

Ken29

Hello, Here's a simple patch that doesn't work the way I expect. I'd simply like to drop a file, then save a preset and find it back in text box when I recall the preset but the "drop file name" output doesn't seems do be memorized by the preset and always send the last drop to the text input. Any i...

Ken29

Thanks mate,

Looking forward this new feature...

Kenan

Ken29

Hi Mates !

In a case I have several identical subpatches wired in a patch, if I modify one subpatch, how do I reload all the others without un-wired-rewired ?

I tried the function "reload patch', but apparently, it always reload the top parent patch.
Hope I make myself clear.

Kenan

Ken29

Nice !

Welcome to %s forums

Search found 106 matches

Re: GRM Plugin VST not recognized and AU crashing Usine

Login • Register