Welcome to %s forums

funkyguitarist

hello,
thank you for your prompt reply,

that does all make sense and it is much simpler than i expected.

i will give it a try

cheers

mark

funkyguitarist

Hello, i created a list. now if i select an item on the list A,B,C or D I want a separate midi CC to be send. So I need some kind of logic which creates a midi message in relation to the selected item. I know that a list send values like 0,1,2,3 etc. . Something like an if statement which only produ...

funkyguitarist

Hi Gurulogic,
thank you so much for gettng me started,
that s exactly what i needed to know.
works like a charm.

cheers
mark

funkyguitarist

Hello,
i need to build a simple toggle button for a midi controller signal.
when the button is on it sends a controller value of 127
when its off it sends 0.

please can someone help me get started

many thanx in advance.

cheers

mark

funkyguitarist

hi shawnb
thank you for your response

your explanation sounds logical. but indeed then i have to connect the module programmatically
which i have no clue of how to do so, to be honest.
Is there any documentation you can point me to?
or some kind of a starting point?

cheers

mark

funkyguitarist

hello i can t find anything about it in the forum so sorry if this has been asked before. I have a patch that i use as a subpatch in other patches. when i change this subpatch i thought it would also change in the parent patch when i reload the parent patch. but that isn t the case. it seems like th...

funkyguitarist

hello i want to add a cross fader to a reverb module, changing the signal from totally dry to totally wet with out the dry signal. can some one tell me how to achieve this ? furtheron i want to limit the totally wet signal to a maximum level so that overall level is not getting out of control. any h...

funkyguitarist

hello

i tried the preset manager in hollyhock and found its not working the way its supposed to
when i use patches containing other patches.

in usine 5 i m having no problems with this.

has someone experienced the same or am i am doing something wrong?

cheers
mark

funkyguitarist

hello i d like to sync reason to using reason gives midi clock out. in hollyhock i used the receive midi clock patch. when i adjusted the frame to 30 both were in sync. when i try the same with reason and usine5 usine drifts slowly apart. i looked into the receive midi clock patch and couldn`t find ...

funkyguitarist

hi marco

i gave it a try
and it worked just perfect.

amazing program is this.

thank you for your help.

cheers

mark

funkyguitarist

i m trying to implement some kind of snapshot functionality into my setup. that means that i want to recall the position of certain knobs and faders by clicking on a button. has anyone an idea where or how to start with this. i have barely an imagination of how something like this can work. any idea...

funkyguitarist

hi woodslanding

thank you for the fast reply

you re right that is working like a charm.

cheers

mark

funkyguitarist

hello i m trying to achieve the following; when i press the switch i have assigned to the piano roll s record function i want the piano roll to play automatically. then when i press another switch connected to the "play loop" function i want the piano roll to stop. switching both when recording is e...

funkyguitarist

i have it working now.

but i needed to add a "toggle module" after the "quantize button".

so now it s button ->quantizeButton->toggle->PianoRoll play inlet.

puttin a switch before the quantize button is not producing the expected result.

thank you again nay seven

cheers mark

funkyguitarist

yes that makes a good start and stop button for all piano rolls.

but how can i start one piano roll in sync with another piano roll that is already running?

cheers

mark

funkyguitarist

yes i see

then the question would be
how can i start the button in sync with the overall bar structure.

i m looking for an "ableton live" approach on sequencing.
so i need several piano rolls looped in sync to each other.

i guess hollyhock is capable of this task.

greetings

mark

funkyguitarist

hello nay seven i tried it but can t get it to work. the " is playing" outlet should send a "0" when i stop the sequencer. but it does not. when i connect a LED to the "is playing " outlet its always on although i stopped the sequencer via the space bar. there is no change event i can connect the "a...

funkyguitarist

nay seven
thank you for the reply

i have found the module which is sending all notes of

but i don t see how i should implement it.

there is no onstop event for the piano roll.

i guess it has to happen after the piano roll stops.

any idea how to do it?

greetings

mark

funkyguitarist

when i stop hollyhock using a pianoroll for sequencing and then restart it again it seems that there are notes still sounding. it is like the piano roll when stopped is not sending a noteoff signal to the cutoff note. do i have to implement it manually or is there something that can be done in the g...

funkyguitarist

hi nay seven thank you for the fast reply i almost have it working the selector is expecting an integer for the selection of the output how can i convert the numerical output of a switch into an integer? with a combo list it is already working but i need 8 separate buttons or switches. cheers mark

funkyguitarist

hello

i want to route my midi keyboard to different destinations inside one patch.

i need something like a midi patcher which determines to which pianoroll my input keyboard data is routed.

i want to switch different destinations via a combo box .

any help greatly appriciated

cheers

mark

funkyguitarist

hello

i was wondering if the space of the interface builder is limited to one screen.

i remember in using 5 one could shift to the right and left get more controls on the screen.

cheers

mark

funkyguitarist

hello i m trying usine and/or hollyhock on my lenovo think pad with x230t with convertible touchscreen rme interface. very often when i touch the screen audio crackles are showing up. it has nothing to do with cpu load i think cause i m running only one instrument right now. do you have any advice w...

funkyguitarist

thank you nay seven missed the synchro menu completely hollyhock is starting on the one everytime i replay but stylus rmx always takes to bars to sync. after two theres a slight hiccup and then it s there any idea what i can do about it. i m using the lastest hollyhock version on mac os 10.8 another...

funkyguitarist

in hollyhock i`missing the timesignature and/or position field that shows on what beat i am in the bar. i m using spectrasonics stylus rmx to make some bar locked grooves. its running ok but it alway takes a bar till the vst is in sync. starting in the middle of the bar kind of throws stylus rmx of ...

funkyguitarist

hello nay seven that worked too although there s only a little spot when the trash bin lights up. if you don t make it there you cannot complete the operation. is there a manual where i can find these things other than the wiki manual. and here is another question. can we add the solo button on the ...

funkyguitarist

nay seven

yes this is working

thank you

but how can i remove a rack from the input of a rack?

dragging it out is not working

cheers mark

funkyguitarist

hello

i cannot figure out how to add a master effect into the master panel.

i m sure its possible.

many thanx in advance

greetings

mark

funkyguitarist

hello senso thank you for your quick response. the bloc size was not the problem. i change the frame rate of the mc receive module to 30 instead of the default value of 24. it seems that reason 7 is sending 30frames. didn t even know that a midi clock has a frame rate. i thought it was only importan...

funkyguitarist

hello nay seven

that was it

thank you

cheers mark

funkyguitarist

hello

i notice a drift when feeding midi clock into hollyhook or usine 5 from reason 7.

after a short while they are out of sync.

what can i do about this?

cheers

mark

funkyguitarist

hello everbody a short question for hollyhock when i try to move a fader on my touchscreen laptop the movement seems to be somewhat scaled. (i haven t had that in usine 5) in other words i have to move my finger 5 cm and the fader moves 1 cm. can i change this behaviour to make it a more 1 to 1 expe...

funkyguitarist

yep

this makes sense
have it working
thank you so much

cheers
mark

funkyguitarist

i want to make a midi controller a fader going into the midi create module and then to the midi output seems to be the way to go. but in between the fader and the midi create module there is some math missing i suppose. so far i have the fader sending a controller value of zero. everything in betwee...

funkyguitarist

hello this question refers to hollyhock i have two racks loaded . inside the racks i have a vst instrument and a pianoroll feeding midi into these instruments. how can i make the two pianorolls stay in sync. i m guessing it has something to do with the master sync but i cannot figure out how to do i...

funkyguitarist

hello i m getting slowly forward reamote seems to be a good choice still the only problem is that i can t see the reamote driver in the system/ audio dialog in Usine5. reaper is installed correctly. In ableton i can see the reamote asio driver. it seems that the driver is maybe installed in another ...

funkyguitarist

hi guys thanks for the fast response easine has multiple outputs but i dont know how to adress the different patches to different audio outputs the rearoute idea sounds good. but at least in my stand alone version from usine 5 i cannot find different rearoute channels. i already have a midi clock sy...

funkyguitarist

hello everybody i m new to this forum and new to the software. my questions are refering to usine5. i make electronic music with a real drummer and a bass player. i m looking for a way to record drums and bass and the output of usine on separated tracks. the tracks coming from usine should also be s...

funkyguitarist

my security post required to post a new topic

Welcome to %s forums

Search found 39 matches

Login • Register