Welcome to %s forums

sephult

Hello! So I am using my touchscreen, and I am working with multiple displays and video. Well since I am using a touch screen I cannot push the video to the other display without attaching another mouse and moving it each time. Would it be possible at the Video-Out Device level to specify which displ...

sephult

Hi! Working with my fixtures I am curious if there is already a solution for this or if this is something that might be added. So the DXMIS fixture format allows to specify the label for the range of the parameter like below. As you know one input fader is 0-255 translated in the patch to a 0-1 valu...

sephult

Good Morning! I was trying to use the VU Meter this morning and was assuming that the Fader Color Changes would be indicated at the output, or I would have some way to indicate that the signal was over using the VU Meter. Unfortunately, I was unable to find anything that output any indication of wha...

sephult

Hi noise2sine! I just hooked up my Spark LE, and yes you must have the engine running, as well as press the connect icon manually sometimes to connect. I think I've had issues too where I had to disconnect and reconnect, but hopefully that helps. Let me know if you need help I have mine out on the c...

sephult

I've used the spark LE for quite some time, I believe I remember it is tricky. One thing is the engine has to be started in order for the controller to recognize, and I think also for the MIDI you need to find the device and make sure your MIDI clock is set to output. I'll try mine out here in a lit...

sephult

Hello Everyone! Been some time, and I've started to dig into a new setup which is requiring a lot of external sync. Although things are much tighter than before with MIDI Sync, there are still some things to be desired that keep holding me back. One of the current issues I am facing is using an Artu...

sephult

Hi oli! IRQ being shared? This would be my first place to check and see. Graphics card... and... Intel's wonderful controller chip if USB 2.0 for your interface. I doubt RME would have this problem, a few years ago I picked up and A&H QU-32 with serious issues. After they had no solutions, 2 days la...

sephult

Buses are sent when a patch is reactivated.
Awesome!!!

That always gave me headache in the past....happy to see improved!

sephult

Hi Nay! yeah I did do a workaround with the inc/dec buttons ....I get frustrated because I always see the inc/dec value and many times want to use this way...but it doesn't seem to apply to the fader itself when clicked and manipulated with the mouse. For example a minor tuning knob that steps in fi...

sephult

I love having the button increment/decrement steps on the faders/knobs, but wouldn't be useful to define the step size of the fader? I'd like to see being able to checkbox and having the fader follow the step size, not just the buttons. example of 0.25 step size....the fader would only output 0, 0.2...

sephult

Hello! I like the show value on click option, however many times I use the scroll-wheel. Many times the scroll gives me more the fine tuning and easier for me to control, however unlike click-and-drag...there is no "show on scroll". Any way to add for both scroll and click or the additional paramete...

sephult

Hi Everyone!

One thing I've noticed over time...and I always wondered if it should be there....
Comma text input for the x/y pad...I always want to put the values or be able to change the
text indication of the objects, but it's not there.

-s

sephult

I was surprised to not see an array output for this module.
Might be easier to utilize with one.

-s

sephult

So curious I am still having oddities with the highlighted "New" posts. It used to be that all of the new ones in each section were highlighted....and that they wouldn't disappear until you entered the subsection of the forum. Now even if I enter one of the subsections, all of them just seem to de-s...

sephult

Awesome about the TouchFader!
-s

sephult

The Power Management throttling CPU performance (most likely fixed when parking modified), I generally max these out the first thing I do...as well as the Graphic performance. So is the CPU% solely based on the difference of idle/Usine, or are you adding in the idle? If idle is running high...then m...

sephult

I use MIDI Beat Clock Sync to the Intellijel, which in-turn has 16th clocking at 96ppm. I run this to a TipTop Trigger Riot which is where I am reading the external BPM received. I will have to do some block size adjustments etc to see what happens, just thought it was odd that almost 10 BPM higher ...

sephult

Hello! I was wondering how people were doing with sync of external gear nowadays? I am using an Intellijel uMidi interface for my modular setup, using Ableton on 16th (96ppm) the clock does fluctuate. Although it fluctuates it is always around the target tempo. It seems so far in my experience that ...

sephult

Yeah I would find it cool to have a clock output in the MIDI devices...be very cool to modify with clock multipliers/dividers/stops etc
-s

sephult

Had to tease too didn't you 23fx23

Love your interface.

-s

sephult

I actually found it pretty interesting. I don't think I have ever looked into one before. I've heard the name, but didn't realize early on what it was. Kinda reminds me of the Karlax with a breath controller attached. Be cool if there was a Controller Section with odd and DIY controllers. I love the...

sephult

Usine can be networked with other instances of Usine. With this you can have a Master patch and share this with another computer on the network. So say if I create a drum sequencer on my computer I can share this to another so someone else can play it.....then I can focus on playing something else. ...

sephult

Hello Everyone!

Very interesting actually found one of these Eigenharps at Guitar Center Used right now for $300.
Thought someone might be interested, very cool looking controller with breath.

Eigenharp Demo

Eigenharp - Guitar Center Used

sephult

Interesting about the snapshots, you know I had not thought about it only being the specific settings tab that was saved (obviously why size wasn't saved). Awesome idea about the Copy/Paste, I agree with you about the God Mode-Validity. Yes that does sound a lot more efficient and I am looking forwa...

sephult

Sounds good, I have no qualms. Just something I picked up.

Maybe a design upgrade in the future.

-s

sephult

Well the option currently exists for "Can be randomized" With the current way things are implemented when you select a patch it is expected that you are able to do the full-patch randomization immediately. Not sure if you could do something with the IML upon creation, but seems like it would be a hu...

sephult

I see Sylvaint had brought this up too. Back in HH2 (around early 2016) Senso was doing some work with the Randomize. Originally subpatch items would not randomize or have a full-randomize of the patch either. I believe we had talked about the hidden item randomize as well, and he was aware...but I ...

sephult

I can agree on that, yes sometimes you just want to duplicate some attribute, but not the others. I have had that as well and you are right. So If there was actually a snapshot menu that had checkboxes, so you could specify what attributes you want to snapshot onto your interface. This would probabl...

sephult

Hello! I believe I have mentioned this before, possibly in this same thread. I know I have talked about it direct. Spending a lot of time with Hollyhock, one of the biggest pains I have run into is Design and Redesign of my User Interface Objects. In cases I will have many knobs and I realize I need...

sephult

haha they just keep coming. Multi-Bus Outputs. All samples go to the main outs, but there could be like 2-4 more pairs, where you could assign a single sample output to this for processing individually. Oh and I didn't remember if I said this before...The Note Range (I think I mentioned above). This...

sephult

Also I was going through and thought that it would be extremely useful to have the samples list on an output node as well. Maybe a trigger index would also be useful. This way you could display the sample names if you wanted for the midi channel, and/or indicate the sample externally of the MIDI Sam...

sephult

As the title says: Add Snapshots on VU Meters for Customization.

I like to modify the VU meters, but no snapshots.
Would be cool in the future to have options for Attack and Release, or possibly afterglow like the oscilloscope.

-s

sephult

I've been using some different UI designers.

One of the things I think I miss when I am using Usine is Ctrl-Click-Hold-Drag to duplicate the object.
Would be cool if you could do this in the patch editor window to duplicate modules.

-s

sephult

Curious about the tuning/retune....Although you can individually change the pitch of each sample...there is the overall pitch, which can be used. Not sure if this was what you were talking about, but this can be found on the pop-up. There is also an Ignore MIDI OFF. Wanted to be able to play the ful...

sephult

Yes damstraversaz...during making banks I was really wanting an external way to control the start and stop of the individual samples loaded (externally) I really like to have moving/animated sounds that vary over time....some more humanization. The pitch stuff I am glad is in there. Same with the ra...

sephult

Would also be cool to have some indication of the mapped MIDI Notes used
Say if C1 through D2 was used and loaded....An array or comma of the notes might be useful.
This way you could somehow parse and use for auto-assignment of MIDI Notes on other devices, such as sequencers, etc..

sephult

Cool, to tell you the truth I didn't realize they were there. I think I searched the wiki but could not find any info on. Unfortunately this doesn't help. I am actually taking a d8b which only has HUI. The DB25 cable between the CPU and the console is serial driven...and I sniffed and decoded the me...

sephult

Hello! Something I wanted to have added that I think would expand the MIDI Sampler a bunch: Array access to gain, pitch, and other parameters....... maybe be cool for random and reset pitch array too. Length parameters would be extremely awesome too, an array of start and one of the stop..... I alwa...

sephult

haha...well I end up with insane finds sometimes, i've got strange odds with things. I picked up an entire fully loaded d8b, with a fully loaded HDR 24/96, all cabling, headphone amps...inside an Argosys desk! and how much?? Originally $22K...got it all for $400 :lol: Wasn't going to pass that up. A...

sephult

Nope, I scoured and found old MCU to MIDI chart I had finally. If you have anything more extensive like LCD / VU Meter control then I would like. Actually yeah, I am trying to get my hands on the entire MCU MIDI protocol documents (which I wish I could find, and probably a lot of others?) I have a f...

sephult

Yeah I knocked out, I was pretty dopey when I wrote this...but you answered everything I was looking for man...lol :lol: Im bringing in and parsing serial data from my Mackie d8b. Commands are like 5-char... CHXXi, so the text representation is then in hex...ex... Fader would be like 1087f (channel ...

sephult

Hello! So I am trying to wrap my head around this at the moment. I have incoming messages. Most of these messages are hex, with about 5 bits per message max for standard messages. The problem I am having is separating each of the characters in the stream. I believe I could just bring these in as Arr...

sephult

I'm still buried in all these awesome modules Oli.....definitely some great things in here.
Loopers are awesome!

-s

sephult

Senso/Nay,

Does this patch still exist?

-s

sephult

Hello All! After much searching...not very much answers...I decided to just do it myself and convert my d8b to a full-fledge Mackie Control implementation. I already hacked and sniffed all the messages....just ready to do implementation. Before I completely rewrite...has anyone already attempted imp...

sephult

Awesome, hope it works well...I got sidetracked at the moment and haven't made my way back to MIDI sounding....more control at the moment.
I think it should be able to turn on/off now as well. Before once you adjusted the length you couldn't revert to just normal...

-s

sephult

Have you tried the new Length options in the Transformer? (I assume that's what you are using) I ran into the same problems ages ago. Actually I'd have to dig and convert...but I wrote a buffer script that was dynamic. Was pretty cool but needed some work. It was essentially the same type of thing, ...

sephult

Okay well I think I might have ran into a bug!

I had it set to 115.2K....well I turned it on and off and it was saying 56k even though set to 115???
So I when through and set again and it looks like ASCII might be making sense now...lol
-s

sephult

I was wondering if anyone had much experience with the serial port module? I am reverse engineering a protocol that I was to convert to Mackie Control Emulation from HH. I was able to tap the serial port, decode the messages, etc... When coming into Usine though, I have no terminal-style text interp...

sephult

I'm thankful for that 23fx23!
(see it's a different day) lol

-s

sephult

awesome!

sephult

In America we have this silly holiday called Thanksgiving. Some will say why do I call this silly and get all offended, because tradition is everything. (Beyond Historical Facts and relative things...) I have always been confused as to why remembrance is such a big thing, and reflecting and growing ...

sephult

Hello!

So I have the fix for this. I reported it the other day, but the solution.
Under settings set full-screen on start-up.
If you restart Usine....

The Full-Screen Toggle now works!

Looks like all you have to do is...do this once and it works regardless if you startup in full-screen anymore

-s

sephult

Okay great, I've had this for awhile...just seems Senso isn't able to replicate. So I haven't been able to get fixed.
Glad I am not the only crazy

-s

sephult

I find myself doing subpatches and almost always have to put a pass if changed on the In/Out.
I think it would be beneficial for the inputs/outputs to have a checkbox and internal pass if changed.

In the future I think this should be added as an internal option to many modules.

-s

sephult

I've found that my Fullscreen will never come back out of Fullscreen.
When this happens the color palette stops coming up to.

Anyone with x64 ever notice this? At the moment Senso cannot reproduce.
I'd appreciate if others took a look.

Thanks

-s

sephult

I like how the text panel is available on the settings/parameters tab. However, in some cases all I need is a comma text string and not a whole panel. (I haven't confirmed yet, but I don't think comma text working properly on text panel). In these cases I'd like to just just the fader text. Instead ...

sephult

Hey 23fx23!

Getting some time and use...found a bug.
ListBox, if you put a text fader on the comma input with nothing it seems to complain Error: in paint.

Does the listbox have any way, or do you have a trick to treat it like a combo?

-s

sephult

Superb!

-s

sephult

Strange, today it looked like it was working properly. It's the little entropy bugs rushing around everything I'm doing. lol

:lol:

sephult

Morning everyone.
Seems over the last week my forum doesn't seem to highlight the new posts properly.
Anyone having problems with the forum lately either?
-s

sephult

Yep, I did that once in the past. Actually, was like dejavu...I had made one and used for quite awhile. I was doing a lot of interface re-layout....working a new wacky synth over the weekend. So many times where it would have been very useful so I thought I would bring back up. Maybe I'll throw toge...

sephult

I've used applications in the past that had a tiny coordinates display for the mouse point in one of the corners. I think it would be beneficial to have Coordinates showing with the Top/Left, and XY Positions for easy reference of where an Object should/could be placed. This could be toggled on/off ...

sephult

Hello!

OMG I love the Arrow Keys and finer Scroll Wheel.
Some other ideas.

You now can use the arrow keys to move. Well what if you held Shift- and pressed Up/Down to inc/dec the height. The Left/Right would do the width!

-s

sephult

Awesome!
I completely forgot about the Virtual Desktops!
I used to use them in Linux all the time...and I keep forgetting win10 has them.
Thanks!

Definitely will work.

-s

sephult

So the one question though, is there anything that takes Multiple Stereo or Channel Pairs and outputs in a Stereo Pair?

The Audio Mixer does, but only outputs a single output.
-s

sephult

Definitely understood and agree on priority. Actually, I just circumvented. It's just I've been limited on time and wanting to keep up with the latest version...so each time I download, unzip, then startup and uncompress...and then have the splash override...I just get antsy...Ive been totally limit...

sephult

You are Right!!!
I keep forgetting!
I get used to using the Dispatch/Select on the Data so when I do some audio routing
I always get confused with this.

Thanks for the reminder..

-s

sephult

I think the Sequence Lines/Steps, etc... Should also have an option for One-Shot. At the moment I'd like to Trigger and ignore incoming until the sequence has finished. I know I could find a workaround, but even then there is not a specific node for "resetting" like on a sampler, etc. I think these ...

sephult

Hello, There is the option for inlet/outlet visible which is awesome. I wish there could be separate Inlet and Outlet. Also if you place an object like Fader/Knob in subpatch the inlet shows, but the outlet does not. This forces you to wire up a data out. It would be great if it showed an outlet if ...

sephult

It seems like I can never get out of Full-Screen once I set it.
Is this broken? Is there something I am doing wrong or goofy?
What's everyone else's experience?

-s

sephult

I agree woodslanding. I wish there was a Config/Script/Functions and a Config/Script/Procedure directory that we could use. It would be nice to place these and be able to reference as our own functions and procedures. As add-ons it would be nice to have shared scripts as well. Definitely reduce redu...

sephult

I like using selectors for my audio routing. The only problem is that not only do I want to use the Audio Mix Dispatch as Channel(s) Input-switched-to-output I always seem to need Multi-Input to Stereo Selector. I know you can use the Mixer to do so, but in this case then you have to control by arra...

sephult

String Manipulation Suggestions: pos ( ) :integer I think it would be useful to add an argument to the pos( ) string position search function to ignore the case. It does not seem there is a good method to search while ignoring the case. TString IndexOf The TString.indexOf would benefit greatly from...

sephult

Hi x.iso, If you need help with the templates for the plugins let me know. I did one for the VST Learn plugin option and can help if needed. I've got several others I use that I have not released either for examples if needed. Template Manager - Already suggested...I created a clunky one I'll see if...

sephult

sephult

Awesome thank you senso that will be a blessing!
-s

sephult

Okay I didn't know this was implemented, so dependent on the mouse wheel itself then, and will do inc/dec of 1? If so that's awesome senso. ..I'm buying a new mouse today then! :D I am totally in love with the arrow capabilities...positioning...yes is perfect to navigate now....it hit me when I was ...

sephult

Hello! Over the last few years I have taught myself to use the settings panel for Top/Bottom, Size of objects when designing which helped me a ton. Unfortunately the Scroll wheel has soo many massive jumps, most of the time it is not as useful to continuously size or place objects. The Shift-key how...

sephult

Thanks for the explanation, that's what I am assuming what was happening. That is a bummer, I hate restrictions. So does HH still catalog the AU on OSX as recognized like it does with the VST? Or is this just a hardcoded HH3 points to the system, the system provides, and Usine has no control type of...

sephult

So you said you removed AU from the scanning folder and still crashed??? That is odd.... OSX or WIN? I'm primary Win10 x64 So under your configplugins what files you have? Logs with errors and corrupted scans? If you have no AU even in the normal path of scan...I don't know how you would pick up unl...

sephult

ZOOMABLE PATCH EDITOR!

Really Various GUI Details? This is Awesome!
I was starting to think...."Hey has this been in here all this time?".
I really started to think oh my god I am getting really dopey....I can't believe this....but....you're sneaking treats in there

Again awesome, love it!
-s

sephult

"- Possibility to move controls with arrow keys in edition mode."

Oh my god, thank you soo much senso....silly but an awesome addition make soo much easier to adjust the user interface.
Bravo!! Awesome Updates all-around!

-s

sephult

Hello! Hi senso! Many times I install new versions, and I wish I could suppress or hide the initial splash screen especially when first doing the flac decompress, etc. Would it be possible to have a minimize of this splash screen or display the updates/setup in the main interface? I think it would b...

sephult

maybe some cleanup here could be the answer?
ConfigPlug-Ins

sephult

Yeah the IP Player was introduced, I too was asking senso about the need for an IP Output. Unfortunately it was only a stream input to Usine.
The output stream has not been introduced yet. (At least as far as I know)

sephult

Hello! So I am geeking around and started to dig into plugins. I installed v5 of Juce, although the last on I saw was 4 for the provided modules. After having to include and do several things, I had an MSB3070 code 2 copy error at the end of the build. Trying to import the plugin to Usine...well did...

sephult

Morning ! I haven't checked the video updates in a while....but There was an input stream that had became available in HH3, but the output stream was not there yet. I went through the same questioning and request... I wanted to VLC and do some streaming as well....would be soo great! As far as I kno...

sephult

Wow awesome to hear you got it figured! Those are always the crazy ones...

sephult

I might be way off, but just was interested in reading this. So essentially instead of initializing all to the specified values, it's just ignored and accepted because it "hasn't changed" by Usine's interpretation? It just reminded me of a project I did with Auto-Stretch samplers, where I would dyna...

sephult

No I think it's cool idea too...just had me laughing reading your post.... reminded of many times ideas just flowing out and too much coffee on my end. The implementation of racks I think is great, but I personally believe it's about time to evolve a bit as well. I loved when senso introduced the mi...

sephult

Someone get the tranquilizers, i think x.iso finally hit that point

sephult

I took quick glance here on break at work try to give second pair of eyes....though...

Where is if MIDI array 0 then set Midi out length zaero and don't process?

sephult

Okay well here is an idea... Not as clean as just one-wire....but could be automatic...set-and-forget. I haven't approached it yet...but the last piece I am looking for is a fast-scripted IML. If I have a scripted IML that can find out the plugin located in the patch, and the starting point params n...

sephult

Drives you nuts doesn't it guru? You led me back down that path with that post, completely starting to re-hash and remember...Now you have me chompin' at VST array and ..... D@&n! I lost the VST Array again, mumble grumble...resize...haha

-s

sephult

I think this is more a bug than a suggestion... I would think that the parameters of a VST should be fixed and internally never be forced to change size. I have a tendency to get the horse before the cart...and I end up forcing the size of the VST......... I can find only fixable by recreating the V...

sephult

Woohoo!
I figured it out...little by little

sephult

Good Morning! So I am familiar with modifying the existing projects/solutions. Question is to start fresh as a template, what should I be doing? I've read it's quite convoluted to rename projects, but I know there are many here that do all the time. What are the best steps to create a working templa...

sephult

I like change and evolution...Although there have been trials and tribulations...just seems to be getting better and better...step by step!
Excited to try!

-s

sephult

guru, As far as disconnecting incoming array unless values have changed...for the array of a VST: Are you just wanting control from both external UI objects, and the Plugin interface? If so the VST Plugin with Learn option, I have it so you can have multi-control without problem. Just drop a vst int...

sephult

Super awesome senso!

sephult

squirrel...there goes 23fx23....
I am the same way...lol

-s

sephult

Not sure thomaschamotte,

I tried resizing the container and moving the panel image...at the moment mine are pretty solild.
Can you share your patch or maybe a picture to show as well?

-s

sephult

Also I just thought it would be very handy....

If the Lock or Global Snapshot is ON.....

When wiring new nodes, and creating new objects such as faders or knobs....when they are created they use the snapshot selected immediately, rather than the default format.

-s

sephult

Okay, I haven't really got the trace/debug stuff down efficiently and consistent so I am not getting to see the internals like I did with scripting at the moment.. I remember with the FastScript I always got hosed because my Min/Max TParameters were limiting my input values.....still in that same mi...

sephult

Will this be an exposed node for the reset button?
So you can wire in and reset from an external source?

-s

sephult

http://sensomusic.com/forums/uploads.php?file=ExampleGlobalSnapshot.JPG That is soo crazy, I was just going to suggest the exact same thing as ahonoe. I could see the snapshots residing in the left-side bar where the Color Palette exists. It just seems these are common global format controls. I thi...

sephult

Hello Good Morning Everyone! I hope all is well! So the question and issue I have ran into this morning with the SDK. Is there a way to Expose the Min/Max and inherit these on the external objects, as well as a separate setting that sets the modules node/internal limits? Example: User drags wire fro...

sephult

Hello, pParamInfo->SeparatorCaption This seems to work good for showing the separator in the sections of the settings tab....But not a Caption for the separator on the module. Would be so awesome if a separator caption, say underlined or slightly bigger lettering (maybe centered text with underline ...

sephult

Hello Everyone, Had some time and created my First Module. Pass Flow Dual - User Module x64 only Pass Flow Dual - x64 and x86 This one is a Pass Flow Dual: I've always found myself having multiple data streams where I needed one inverted. Also included are dual inverted logic outputs as well. Figure...

sephult

As the Subject says, I get reaction for callback with a switch high, but not when it goes low.
Any Ideas?

In my code I just have and IF THIS > 0 then SET OUTPUT HIGH, and then an ELSE SET OUTPUT LOW

Confused,

-s

sephult

I know this is probably far off...but you know whenever I patch depending on my resolution as well...it's hard for me to see and wire nodes.
It would be totally cool to be able to zoom the patch edit/module window just like a user interface zoom!

-s

sephult

That is true, as I mentioned earlier x.iso...at least on HH2... You could tell the mode when you started up...looking at the config file it told you if you were using the better graphics. Sorry brains not awake yet or I'd spell it out, but you know what I mean...I've typed it like 6 or 7 times in th...

sephult

It's probably something to do with a general data null and the handling with a stopped audio signal. With certain audio modules, you will notice that breaking the chain will go weird. The FFT are the same way with these..and there a many others Ive noticed over time. speaking volume/mute, couldn't y...

sephult

Atom CPU seems a little under-powered for running, at least anything moderate wouldn't you think? Haven't dealt with any of the newer ones, but older ones I just didn't have a good time with. I have a ~2013 Samsung Series 7 AIO, Which has an i5, well back then 6GB DDR3, and uses Intel HD 3500 DX11. ...

sephult

Doesn't seem to sequence on my end, but I'm gonna play around with it...I have a Positional sequencer I could possibly run it with..if you don't have another method you are using..

-s

sephult

btw if people download, make sure your addons are up to date...then when prompted for the touch fader....do locate folder and point to your Usine Director @ /Config/Addons

sephult

Would be cool if there was an indication somewhere that said New Add-ons are available.
Could check the database against the internal one and if different just throw up the message or indicator light.

-s

sephult

Very cool looking x.iso I will have to try later after work. I am probably going to patch in MIDI Busses and use internal VST. I do this sometimes with my sequencers and give the option. Create a bus for each output. Then on each VST you can just wire the input from the bus wirelessly...rack to rack...

sephult

http://sensomusic.com/forums/uploads.php?file=SmallMixerExample.JPG You can go to Usine Panels -> Small Mixer. Place this in a rack and then Show in IB. I believe you might be able to modify to show which ones, or mask the others you dont want. I did this several times during development...cool to ...

sephult

hahaha well then why don't you stop doing that x.iso....it's a trap! lol
I know Ive done that many times....thru I keep telling myself...use a thru.

-s

sephult

I was thinking it would be cool to have a wire disconnect method. At the current time you have to select or delete the wire by finding the center point etc. Now if there could be a hotkey, then click the node it would highlight the wire. If multiple wires just click again to toggle to the next. This...

sephult

How about using a cross fader instead to break the chain?
The pass flow, i don't think is fully an audio signal device as would be the cross fader.
Just one side open the other side your attached?

-s

sephult

It seems that sometimes the Caption and String Value Alignments (Left,Center,Right), as well as the Vertical Alignments (Top,Center,Bottom) just don't want to line up depending on your object design. An example is the switch where if you add the LED and put a caption.... the Left Align puts it almos...

sephult

Hello! I'm used to drawing programs such as Visio which have the snapping interface pixels such as Usine. One thing I always have issues with is using the mouse for placement, or having to just enter values from the settings tab. I think it would be cool if you could click/highlight...or just select...

sephult

Although the visual cable element might not be there, you could always develop a multi-modulation selector for your controls. I've done this with some synths I've built in the past. You can use selectors and quicklinks, or busses to do this. Using a bus, you can also pull in the bus name list and se...

sephult

sephult

Awesome about the unload!

sephult

That is awesome to hear osha! Yeah purple...although not my favorite color...the shade is cool, and could be a much worse color...haha. You could just change the color tone of your monitor right....lol :lol: HH4 right, yeah I think Senso and Nay should have a new favorite color by then? Maybe the th...

sephult

Just general like a sync clock, position clock base...etc.. or square oscillator...haha
I have a synchro control that I use all the time that senso made and I'd like to actually do a sequencer clock controller.

-s

sephult

Which version? HH2/HH3?
Yes I used to have problems with HH2, not so much HH3 but I think there still is a latency in there.
About how much drift did you get...like how long until the drift occurred? On a specific heavy loaded preset...or just accumulated?

-s

sephult

Good Morning,

So I saw Juce was being used in some modules. Is this the underlying method for the FFT and Audio Processing?

-s

sephult

I was just curious if there were any already made Clocking Modules for use in the SDK, or any code snippets to share?
I don't want to be redundant, I'd rather evolve things and keep a standard rather than many duplicate modules of the same type.

-s

sephult

Hello!!!! Question #2 MIDI Array Sizing: I'm slicing and dicing and found that this was a slightly different method. I am wondering....is the MIDI Out Size handled as a part of the SDK functions now? I do see where the stream is clamped off like normal before the input size detection. Interesting th...

sephult

ugg, I'm already at it guys....already at it....haha

sephult

I completely agree Nay, I will expand the SDK tutorials and help make it easier for others hopefully to follow. I feel like I'm cheating on my scripts though....hahaha

sephult

Again! hahaha :lol: Well for reference the example has this as the color set...but it is the wrong case and comes up "undefined" pModuleInfo->BackColor = sdkGetUsineColor(clMIDIModuleColor); This is the correct way: pModuleInfo->BackColor = sdkGetUsineColor(clMidiModuleColor); And th...

sephult

Hello,

I noticed the module color was coming up black so I wanted to fix it to show as a MIDI module.
I did find that this "backcolor" was commented out, and

Code: Select all

clMidiModuleColor

throws error of not being defined.

What do I have to do to get this to show up properly?

-s

sephult

I was not finding the # of parameters....but I just found it finally! Funny how you write a message for some help, and then solve it. Well regardless here is some beginner information for adding your first parameter to a module: Here you will define the number of node parameters: void MidiTranspose...

sephult

Hello All! So finally decided to dive in the SDK. I am just looking now with some examples and trial and error...but mostly error. I took the MIDI Transpose demonstration and was looking at how to start adding nodes/parameters. I copied the following from case 2 of the void MidiTransposeExampleExamp...

sephult

So does this affect anything at all (except the trace message)?
I was hoping Senso to add a disable trace warning sometime soon.
I'm constantly throwing errors, some of which I know about, but constantly pop up on me...lol
Mostly my own error though

-s

sephult

Awesome Senso, will definitely debug and report my systems here.

-s

sephult

+1 I just started to use the SDK (warning...lol) :lol: 23fx23 is correct....wow very difficult for me...I am lost with certain things to begin with and constantly having to open/close because I am still in that trial and error phase. Definitely think this is good thing to do. Which release should we...

sephult

Alright Checkmate!

I'm on board.

-s

sephult

Hi Guys, I also remember as well...I remember in large workspaces...or when modifying large patches....each one has it's own "Undo". I know if you disable the undo for a larger patch you are working on...it definitely helps performance depending on the system. Now just remember to manually save. Jus...

sephult

YES! So the problem is that accessing this command menu is difficult. I had to click in the empty gray space in the bottom right of the presets panel to access this. I was trying to access from the LIST view and could not find anything. Also clicking other buttons in the Preset List did not prompt t...

sephult

hahaha, I know I was shooting out into space with this one HH6? Maybe by then I can pick up on the programming and help do. :lol: I like the Additional Workspace, I am going to have to look into more because I do not use it as often as I want. Maybe instead of rack management modifications.....some ...

sephult

Awesome thanks for the suggestion Senso,

I will take a look at the BINDS.

-s

sephult

1) transform MIDI Normally 0 length means ' set length disable'. But the queue of NOTE OFF (which have to be sent later), is not cleared. So I think that you want that this queue is cleared if the length returns to 0? I'll implement it. Hi Senso! I'm a little confused by your reply and unsure, so I...

sephult

I'm looking at DxWnd thinking might be some things to play around with here.
You can hook and modify the api settings, but I haven't really had time to sit and mess with much yet.
DxWnd

-s

sephult

x.iso I was more referring to HH/HH2 days...because yes there was a difference. Also back then we fought a lot of Nvidia driver problems, D2D/GDI switching, and all the while Senso was improving graphic performance. I have one of my machines with Intel HD3500, and my other is GTX980 and GTX750ti. I ...

sephult

I haven't been much of an AMD fan for many years, although I know they are making some great strides. When it comes to solid, long-lasting computers, if you will notice...I don't generally see major corporate entities relying on AMD processors. It might just be some behind-the-scenes deal with Intel...

sephult

[sup][/sup]Hello, I use a 6 core 3.8 i7. Make sure you have adequate cooling and a highly capable motherboard such as an EVGA. For cooling you can go water, but I do prefer convection. I had spec'd my heatsink and cpu fans for about 6 months before I decided. I decided to use a promeglahelm (monster...

sephult

Don't worry Matt, I am totally in same boat, major studio re-org here...just started back to work after medical leave for 1.5 months...wanting to get my groove back. Really wanting to.:) Hopefully (i am soo hoping), to have my studio back by this weekend (if I don't keep breaking nice computer monit...

sephult

No need to apologize 23fx23!

We all know the busy

-s

sephult

I am a Windows x64 user,

I was unable to duplicate with what I had.
Nay is correct, not much clue further if there is no work space or patch to see what is being setup.

-s

sephult

Settings/display not correct on reload

Found that my encoders are not saving design display properly.
Top is how should be, below after reload. Just touching the resize will cause to correct.

-s

sephult

Hey 23fx23, I think I can reproduce that bug, and it might be in your module. If I select the main patch, and then the EYE visual settings tab.... Your modules are stuck in that tab and no longer display the other tabs. Once you switch to a different tab on the patch itself then go back to your modu...

sephult

Could you upload your work space or demonstration patch so we can see?
I think I know what you mean, but i'm not duplicating at the moment (probably not the right way).

-s

sephult

Very cool. I do agree with Senso on simplifying. You have a great module. I'll try to take a look here and maybe give you some ergonomic suggestions for simplification. However, I actually like having options...this is totally the type of module I want....be very cool to have an advanced version and...

sephult

So I just had recalled this memory from some years past: Did we ever figure out a solution, or implement a way to replace all modules of one-type (usr included) with an updated version? God I hope we get this implemented...especially with as many of these TouchFaders I am using. Regardless, I'd real...

sephult

+1 guru Damn good suggestion guru! My god I've been wanting to reduce my Coarse/Fine for synths like this for some time and had to come up with a bulky alternative (although it was cool because I had single-click increment/decrements acceleration)...still was bulky and close to defeating the reason ...

sephult

Hi estrauss69, Another thing I think might be an interesting clue is possibly how you do get it to work then after it is broken. Do you create another workspace and put in the Harmor/MIDI Big Key? Do you just do another patch and plugin and it works in the same workspace as the broken one (one rack ...

sephult

Hello! Yes, i am on 136 at the moment. I'll have to collect some more details about this bug. Yes I agree, this module is amazing for personalizing. It would make sense to have a simple and advanced for a lot of these options. Could probably combine more efficiently too so standard user doesn't get ...

sephult

So I just had this happen on another object in the Factory Library. This might look like an internal Usine bug. Typical E032 like we have always seen, then DESIGN. At that point all of the settings tabs for every module disappear and are not right. Sometimes everything works fine affter. I'll get ma...

sephult

Hello!!!

23fx23,
It seems when I go to the EYE design tab I am getting an E032 -DESIGN error.
When this happens all the TouchFader Modules Settings Tabs are not available anymore.
Unfortunately reloading the work space does not correct. Only a full Usine reset will correct this.

-s

sephult

23fx23,

Request:
Mouse Scroll Wheel Response?

I find myself using the scroll continuously, it would be cool if touchfader used.

-s

sephult

Hmm,

Browser download corruption?
Antivirus?

-s

sephult

No Video Network Flow output at this time.

I have already requested from Senso awhile back, as you can receive a stream, but cannot send one.
Hopeful this will get implemented sometime, I've always wanted to stream out and record/present externally.

-s

sephult

Hmm,

Yes some are newer files created on a different system, so that is an interesting theory,
However, I can open all of them, I am unable to duplicate.
Maybe the FLAC conversion is messed up. Maybe try the installation/extraction again in a different folder and see if acts the same.

-s

sephult

Greetings estrauss69!

Welcome!

-s

sephult

File Directory Hi Ringmod! So quick patch, shows you can use the file lister and specify the file extension. Here you can modify how you want. I just made it use an open dialog and select one file in a directory. It refreshes and displays all files via the comma text...these are then pushed into a ...

sephult

The files should be FLAC to begin with in the package, and when first opening HH3 they should convert to .wav
Are these .wav?

So if you do not recall ever seeing this process. You could delete your config file and force this process possibly again.
Check to see what format these are in?

-s

sephult

The output MIDI path has the transformer which limits the scale of output notes. So the controls of the sequencer will still display.

-s

sephult

It is possible, I have done this before but i'd have to dig. I'll look.

sephult

You can do a save workspace and then you can navigate where you want to store it.
Just drag and drop to open, or you will see the workspaces on the startup Recents.

sephult

Having soo much fun with a Logitech Extreme Pro Flight Joystick and Usine! But man it was a disappointment when I was going to setup the 6-base buttons to change presets....and...umm.... I realized it was not a MIDI or Keyboard Learn...bummer. Maybe a Joystick Learn could also be in the future plans...

sephult

Hi guru! So if the batch file is terminated early, the current config folder you are using (if anything changes) will still remain in the "config" folder. Because the batch file has been terminated....this "config" will not be re-copied back on-top of the specific xxx_config folder you selected. Whe...

sephult

no problem...you find any bugs let me know.
Just a simple batch file...but sometimes simple is good.
I just threw together this morning...went through it quite a bit, but haven't had more than a few hours today using.

-s

sephult

I agree. So in the meantime if you have windows I made a Configuration Manager that handles three different configurations: Performance/Studio/Design This creates the folders, does the directory/file structure moving etc. The batch file remains open and automatically saves/backup of the proper confi...

sephult

So you can look at the midi specification. Regarding timing clocks, the only thing I think in this situation without the ability to "touch" the main clock is send more clocks thus speeding up your external devices. Typically in DAW there is never much capability to divide/multiple clocks like there ...

sephult

Open the log file in the root directory. There should be a Canvas line...what does yours say? I have: [8:41:45 AM] Canvas:TCanvasGdiPlus [8:41:45 AM] Screen Resolution:1920x1080 This is on Intel HD Integrated, I'll check the main where I have a few other GPU tied in. It used to be if you didn't have...

sephult

i was wondering the same thing. I'd really like to have the ability similar to a modular clock divider.
I don't think you can now, as it's hard coded into the device. maybe options can be available or exposed to do this?
-s

sephult

I was just thinking it would be pretty cool... When you add a new rack, it could ask if you want LEFT OR RIGHT. If you select right, obviously the rack placement would start far right with space in-between. It could populate the right side to left but can maintain space from the normal left racks. I...

sephult

I think there needs to be a button to clear the preset list.
Even if it prompted are you sure, I think that is fine.
I end up filling a list up and wanting to do a different way...I cant find a way to clear out.

Any methods I missed?

-s

sephult

Your output MIDI Device does not default to wire SYSEX to the output.
Double-click the device either in the rack output or device menu. You will see the two red nodes and no wire.
Wire those up and try.

-s

sephult

Now the buttons and context menus sound like they could be realizable with the current programming capabilities. Some sort of background IML maybe search and fill context with module nodes. then selections would wire up similar to an IML template. Question is how to get executable buttons in the pat...

sephult

I agree,

You would want this to be enabled/disabled in the Protect section I believe, or an enable in expert.
-s

sephult

Hi x.iso! I also had thought something similar but slightly different in regards. I'm not sure but the zooming interactivity might be a huge effort to implement for the editor? It seems like a big programming since it doesn't already exist. The menu system sounds like a good idea, but then would hav...

sephult

Yes there is soo much different, and such improvement in stability...yes it's hard to explain every new feature or change.
Maybe I can put together a list from what I know.

Very much appreciated gurulogic, I know everyone appreciates as nay has said.

-s

sephult

I agree!

That was very cool Matt.
Love it!

-s

sephult

Can you turn the visibility on and off from the left hand panel?
Maybe they are hidden? Does the action of the curves still work even though you cannot see them?

-s

sephult

You are right video from rack to rack is not implemented. Originally I tried to do and also suggested.
I just patched multi-path into my patches. But yes you can bus I believe as sylvaint said.

I haven't tried out yet.

-s

sephult

Yeah the disting has module firmware that can be modified to do a bunch of different things. I had seen it was available to modify. I assumed there were a lot more features than available at the front of the hardware module itself. It seemed like a pretty extensive list. My current modular looks lik...

sephult

woohoo! I got too much stuff to work with!

Love your wavetables and super-oli addon packs though, awesome to hear!

-s

sephult

Yeah I found this issue interesting as well, I haven't done a lot of different video inputs, just internal modules.
That find about 24fps and 25fps is interesting however, looking forward to see what you find with re-coding.

-s

sephult

Yes I agree, that's what I was going for....obviously one can bind whatever key shortcut they want.
Regardless you are correct.

-s

sephult

http://www.divx.com/en/devices/profiles/video

I downloaded test file from divx its an .mkv

I get audio with this. Maybe we need some more information about type of encoding.

Nay/Senso,

Do we have any specifics on the type of encoding of video/audio that works?

-s

sephult

Thanks Stephen,

So did you get a chance to try this out? I didn't see another problem after I added the Transformer.

-s

sephult

For Stephen: Could you create a Patch Post for this and copy and paste your problem. Afterwards you could delete your post from Lytz conversation. I will do the same, this way we can archive the issue better, and clean up Lytz's post. The problem is most likely that the Groove Sequencer does not pro...

Welcome to %s forums

Search found 1107 matches

Login • Register