Welcome to %s forums

rlgsbt

Merci à tous les deux,
J'avais tenté le file lister, mais il me manquait la clock+refresh et cela m'envoyait des messages d'erreurs aux changements de fichiers.
Je vais essayer tout cela sur mon workspace.
encore merci

rlgsbt

Bonjour à tous, J’ai un problème tout bête sur lequel je bloque. J’aimerais que le sampler joue une liste de sons situés dans un dossier. Et si je change les sons dans le dossier, en gardant les mêmes noms (et donc la même adresse dans l'arborescence), que le sampler se mette à jour. Actuellement, m...

rlgsbt

Bonjour David
A priori, ce n'est pas possible sous windows, sauf si tu as plusieurs cartes Rme. Le totalmix permet de gérer cela.

rlgsbt

Hi Christophe, On Windows, with the latest version of Pigment 7 and Usine Win 6.0.250506, it works, but the plugin requires you to disable the MIDI output of the controllers used. See below. This may be a solution for opening Pigment on Mac? However, it takes a long time to open and uses a huge amou...

rlgsbt

classe !
bon bout d'an (comme on dirait au Sud d'Avignon)

rlgsbt

Merci Olivar, Ci-dessous, la même chose avec un peu de cosmétique : - le clic du bouton change la couleur du knob pour avoir un retour visuel - si vous sélectionnez manuellement la valeur dans la liste, cela change dynamiquement la position du knob et envoie les données au contrôleur MIDI (s'il est ...

rlgsbt

Voici un exemple. Il faut faire un MIDI learn sur le Knob (en CC de 0 à 127). J'ai ajouté un bouton "affect" pour valider l'info si le knob est clicable (avec un note On) testé sur xtouch mini combobox select&clic.pat tu rentres toutes tes infos dans la combo box "list 1" qui duplique la liste s...

rlgsbt

Hi Ariajazz,
If you send manualy the program change from Usine, it works ? You could also use the grid.
Here is a very simple patch. You just have to put the MIDI OUT device in the rack output

MIDIprogchange.pat: (16.02 KiB) Downloaded 431 times

rlgsbt

Bonjour Gwenaelle,
J'avoue que 1 an plus tard, j'avais oublié ce patch !
Le piano roll (le séquenceur midi) est dépendant du tempo, par défaut, comme dans tous les programmes. Par contre, si tu veux le synchroniser (notamment avec mon patch), il faut sélectionner l'option dans ses global settings

rlgsbt

Nice ! thanks

rlgsbt

1. when you create a piano roll, you have to choose the number of midifiles/pattern you want.
2.for each "num file", you can write, edit or import midi file
3. Then, you can choose your midi pattern wiith "midi file selection/num fil"

rlgsbt

tu peux t'inspirer de l'arborescence de MotionKit pour le dossier deploy, avec la possibilité d'organiser des dossiers pour proposer directement tes différents wkps.
comme cela :

cela fonctionne de la même manière sous Mac OS

rlgsbt

Salut Greg,
Dans le dossier Deploy, si tu ne laisse qu'un seul workspace, il s'ouvrira directement au démarrage.

rlgsbt

great !

rlgsbt

autre chose à vérifier ;
dans le dossier \Usine Win 6.0.250204\Resources\Devices
remplace le fichier "DeviceDMX.5.240223.usr-win64" de HH6 par celui de Usine 5 : "DeviceDMX.usr-win64"

DeviceDMX.zip: (262.37 KiB) Downloaded 638 times

... et redémarre Usine.

bon courage

rlgsbt

th good routine would be to import old setup in the Setup tab :
https://brainmodular.com/manuals/hh6/en ... tab-global

rlgsbt

Do your plugin appear in Usine plugin list ?
Have you tried dragging the plugin from the list into your patch?
Or simply put your ultratap back in a rack, since there are no special connections ?

rlgsbt

Salut Greg,
You can use >
to save a txt file (after your array) : "Script [Array to Comma text] + Save text File
to read a txt file (array in) : "open text file" + Scipt [Comma text to Array]

rlgsbt

@JF Les "trucs" ci-dessus ne sont utiles que si tu as besoin de beaucoup de samplers. Sinon, autant n'utiliser qu'un seul sampler avec tous tes sons dans la liste, choisir l'option "file location > memory" (qui est déjà par défaut), puis définir le file number pour chacun de tes presets. Cela ne pre...

rlgsbt

Bonsoir JF, Il y a un truc radical qui peut te faire gagner du temps. Une fois que tu as choisi le son (unique) de ton sampler dans la liste, tu relies la sortie "long filename" à l'entrée "list coma text". Comme ceci : Capture d’écran 2024-12-23 190118.jpg Cela va supprimer tous les autres items de...

rlgsbt

Hi, In the Sampler Rec module configured as "circular buffer", it's not possible to change the "max rec time" in real time. If I patch a fader, I can reduce the buffer size, but then, it's impossible to increase it anymore. Then, to setup the max rec time, you have to stop the audio engine, configur...

rlgsbt

Super boulot et plein de perspectives en vues ! (et pas que polyrythmiques...) J'ai testé et j'ai un problème avec les envois de trigOut. il faut passer par un Pass if Change pour avoir un trigger propre, sinon, il les multiplie. Voici un patch qui est plus simples à comprendre.. RhythmBox+Pass.pat ...

rlgsbt

Voici un patch qui converti automatiquement le % du sample au tempo. Il faut juste lui donner le nb de temps de ta séquence.
Le tempo global change directement la vitesse de lecture

Global Tempo 2 Sampler.pat: (47.77 KiB) Downloaded 691 times

rlgsbt

Bonjour Gwenaelle, Le plus simple est d'utiliser un grain sampler et de modifier la "speed" par le tempo (par exemple, en utilisant le module "Synchro Master"). Si ton tempo globale est noire = 100, alors la vitesse de ton sample est à 100%. Attention, le grain sampler modifie beaucoup le timbre et ...

rlgsbt

Merci ! super pratique

rlgsbt

Bonjour Elsa, L'autre possibilité qui fonctionne très bien en filaire si les musiciens ne sont pas trop nombreux, c'est de déporter ton chrono (et toutes les infos qui doivent être partagées avec les autres musiciens) dans une toolbox, puis, de la mettre sur un autre écran. Et au lieu d'avoir un seu...

rlgsbt

Super intéressant. Peux-tu mettre quelques photos en ligne ?
la programmation des url sur le réseau se fait dans Max?

rlgsbt

The "Panel Embedded Web Page" module display the pdf BUT you loose it in IB mode (it's reaching a webpage) or each time you change the view. You have to click on the URL again in the "Panel Embedded Web Page" module . May be you could add a fonction to "affect" the url string in to force the module ...

rlgsbt

the "Web Browser module" open the default PDF Player (so you can't manage it in Usine). The good solution would be the new "Panel Embedded Web Page" witch also display the pdf directly in Usine. This module display all the needed options BUT you loose the display in IB mode (it's reaching a webpage)...

rlgsbt

oli_lab wrote: ↑
23 Jun 2024, 20:55
or use Usine to open a web page with th pdf

Great idea.
Thanks

rlgsbt

Hello Senso,
I'm still one of those old musicians who sometimes need to read sheet music at the same time as playing their patches and workspaces... Is it possible to insert a PDF reader? Or to output PDFs via the video out?
thanks

rlgsbt

It's a great projet and Usine is perfect for that ! quickly : 1. You can control everything in OSC/MIDI in Usine. It's also possible to use polyphony to manage your OSC/MIDI commands. 2. https://brainmodular.com/manuals/hh6/en/learn-usine/surround 3. If you use an LP, you don't need extra channels. ...

rlgsbt

this will be more than enough for all the audio in Usine. The most important thing will probably be the sound card.

rlgsbt

salut Greg,
Le plus simple serait de rentrer manuellement tes valeurs dans un array. Tu auras toutes les données directement !

rlgsbt

here is a very simple example

audio to MIDI note.wkp: (240.59 KiB) Downloaded 479 times

you can also use "Analysis Audio to MIDI 2" module if you need to get midi notes by frequencies

rlgsbt

If you want to use your pro sound card and its drivers (ASIO for PC), you can also use an audio receiver/transmitter, plug to your outputs
I use this one ;: https://www.amazon.fr/gp/product/B0BFH2 ... UTF8&psc=1
it's efficient but you have a big latency

rlgsbt

Bonjour Florineige,
dans le setup général d'usine (la roue crantée du menu de gauche), coche la case "video active" du menu vidéo.

idem dans MotionKit

rlgsbt

Bonjour,
dans les options du "preset module", tu as les inlets save to file & load from file (ce qui ouvre une fenêtre du navigateur). Cela va créer un fichier *.patchpreset

rlgsbt

great job.
thanks

rlgsbt

OK for the dream, but... copy + empty subpatch + paste = you're not so far
of course, you have to manage the IO (and polyphony) and clear the parent pannel, but it's quite easy

rlgsbt

I don't understand why you need bank. The "preset module" can manage up to 64 presets and you can use several of them in the same patch.

rlgsbt

in stereo, you can use some array like this :
1;1;0;0;0;0;0;0
0;0;1;1;0;0;0;0
0;0;0;0;1;1;0;0
0;0;0;0;0;0;1;1

or a preset manager to recall 1+2 3+4 5+6 7+8

rlgsbt

"Audio Mix Matrix" module is stereo (and you can manage your stereo input buses with an array)

rlgsbt

You can use the "Matrix Audio" module, with mutilple audio in, but only 1 output

[attachement=0]Capture d’écran 2023-10-16 213735.jpg[/attachment]

rlgsbt

from a MIDI output, select "Send to Midi bus".

[Attachement=0]Capture d’écran 2023-10-16 212741.jpg[/attachment]

Then, in the other rack, you just have to select the BUS

https://brainmodular.com/manuals/hh5/en/modules/bus

rlgsbt

have you tried this email ? contact@brainmodular.com ?

rlgsbt

Bonsoir Gwennaelle, Voici le même patch avec un tableau au format texte en entrée (cf. la proposition de tableur d'oli_lab). Data manipulation Calc comma text in.pat Par contre, si tu as déjà les valeurs dans un tableau, tu n'as pas besoin de calculer les mini et max, tu les connais déjà ! Il suffit...

rlgsbt

Je suis assez d'accord avec Joffo78

... mais sinon, si tu ne connais pas ta plage initiale des données brutes, le plus simple est d'utiliser les modules "Data manipulation Calc min & max"
Voici un exemple

Data manipulation Calc.pat: (36.52 KiB) Downloaded 827 times

rlgsbt

Bonjour Gwenaëlle
Pour les modules à choisir, cela va dépendre de quels paramètres tu veux moduler (pitch, vitesse de lecture, volume, etc).
Pour les datas, si tu récupères tout en [0-1], cela devrait faire l'affaire.

rlgsbt

MIDI force Range.pat: (12.06 KiB) Downloaded 491 times

Bonjour Damien,
Voici un tout petit patch qui fait le job avec un modulo. Tu choisis le range et la note de base (ici, tout est "replié" sur 3 octaves à partir du do médium 60.
Tu n'as qu'à glisser le patch entre ton entrée MIDI et ton instrument VSTi

rlgsbt

For HH6, would it be possible to add an option to open the info line by default on startup ?
thanks

C'est pour les musiciens bordéliques qui s'aperçoivent au bout de 2 min de concert qu'ils n'ont pas toutes les infos de la section suivante... et que la souris n'est pas accessible

rlgsbt

sampler play polyphoniques_OK.pat Bonjour Gwennaelle, en complément du patch de joffo78, voici ton patch "corrigé", avec 5 boutons et 5 faders. Visuellement, les 5 samplers (soit, les 5 formes d'onde) se superposent. Je les ai mis en mode transparent pour que tu puisses voir la position des start p...

rlgsbt

Bonjour Gwenaëlle Tu veux lire le même sample a partir de départs différents en même Temps ? C'est ça ? Avec une polyphonie, c'est possible : tu crées un sampler avec un seul sample Unique, mais avec un start pos et un play polyphoniques. Si tu as une polyphonie de 8, tu auras alors 8 Plays, 8 start...

rlgsbt

some of you may be interested :
https://www.ultraleap.com/product/leap-2/

rlgsbt

Bonjour Gwennaëlle, Je ne comprends pas ton patch/rack. Pourquoi 2 patchs ? et pourquoi un REC si tu utilises des fichiers préenregsitrés ? un simple bouton ON sera suffisant Pour les presets, le plus simple serait d'utiliser l'appareil photo dans le header du patch, ce que tu as déjà fait. Capture ...

rlgsbt

In Usine, you choose your in and out numbers from top to Bottom.
for example, I usualy split my stereo to surround like that :

the volume module is stereo, but the left output goes to 1, 3, 5 and 7 and the right output signal is send to 2, 4, 6 and 8

rlgsbt

In the first case, your audio device send 2 mono signals to its 1 and 2 output. It's the simplest way to use your signal in a rack, with stereo plugins and stereo patches. In the second example, you send 6 channels, but the signal is only on 5 and 6. It's only useful if you work with surround (and i...

rlgsbt

Great. Thanks Senso. It's usefull (to avoid multiple racks)

rlgsbt

I just discover this (new?) option. What is the "threads" calculation mode of the rack ?
HH 5.2.230411
thanks

rlgsbt

Yes, the /deploy folder open workspaces in IB mode. if you need to open a single workspace with the grid (and other option), you have to use the kiosk mode and choose your options.
http://brainmodular.com/manuals/hh5/en/ ... -tab-kiosk

rlgsbt

À très vite.
Sébastien

rlgsbt

Salut François,
Dans le Dossier d'Usine, tu dois créer un sous-dossier /deploy. Si tu ne mets qu'un seul workspace dans ce dossier, il s'ouvrira automatiquement à l'ouverture d'Usine

rlgsbt

Hello
If you don't need to much real-time video, Dell XPS series are great.
But honestly, with I7 + 16go RAM, you can do everything you want in Usine. The soundcard and the ASIO drivers wil be important as well to manage latency

rlgsbt

rdm_reset.pat: (21.9 KiB) Downloaded 704 times

Bonjour JF,
il y a plein de possibilités. En voici une, avec un range pour contrôler la "largeur" de random de la valeur du reset d'un fader

rlgsbt

A MPE midi audio sampler would be very useful for McMillen user's (and other MPE hardware). I know it's not very difficult to patch, but the variable polyphonic data's received in midi input is boring and I can't affect easily MPE data's to the parameters I want to use.
For hh6?
Thanks
Seb

rlgsbt

I've got the same problem. This version does not work anymore on my pc. A problem with my graphic drivers....

rlgsbt

Hi Luca,
I'm not sure it will help, but try to desactivate the softclipping option (in setup/audio) and reopen Usine. On PC and RME audiocards it works.

rlgsbt

it's a simple fader with midi learn. In the midi section, chose your control type (CC) and the CC number. that's it

rlgsbt

in this exemple, it's just a simple fader in the rack n1. You can use anything in the grid with ctrl+shift.
have a look : http://brainmodular.com/manuals/hh5/en/learn-usine/grid

rlgsbt

you should create a new section for each event. Put your 60min sound on the first line and then, create different section managing your CC values.
like that :

rlgsbt

Great. breadcrumb seems to be a very nice solution.

rlgsbt

rlgsbt

Hi,
Create an empty rack as you want (input, output, patches). Save this rack template and then, drag and drop it into the workspace as many time you need.

rlgsbt

La suggestion de Sylvain de faire appel à un réalisateur en informatique musicale est peut-être à envisager ? Ton projet semble super, mais un peu trapu. Pour les presets (à enregistrer une fois le patch fini), ils sont probablement réactivés par la grille. Il faut que la section soit sur pause et n...

rlgsbt

il faut rajouter le module "pass if change" sur le câble à la sortie de tes capteurs, juste avant l'entrée des paramètres traités

rlgsbt

Il faut que la fenêtre principale d'usine soit sélectionnée. Si la fenêtre vidéo out est sur un deuxième écran, il faut cliquer dans usine sur l'écran principal.
Sinon, il est possible de faire un midi learn en plus de la barre espace

rlgsbt

voici un wkp avec la version de sylvain et la mienne. 2 versions rdm presets.wkp Ouvre les patchs pour voir comment relier les différents modules. Pour la grille, et pour le "grid module" (qui s'ajoute à l'intérieur d'un patch), tu peux changer de section de manière aléatoire, comme ceci : Capture d...

rlgsbt

Un Dell XPS sera parfait pour quitter les mac

rlgsbt

Bonjour Gwenaëlle, il y a plusieurs manière de faire cela. Ce qui me semble le plus efficace 1. Tu peux insérer dans tes patchs un "Preset Module", enregistrer le nombre de presets qui te convient et jouer ensuite sur les recall (avec éventuellement un peu de patch à faire pour un déclanchement aléa...

rlgsbt

Bonjour Gwennaëlle, les addons " MotionKit " et " MusineKit 2 " peuvent être téléchargés avec les versions payantes d'Usine. Si tu veux utiliser spécifiquement les anciennes versions des instruments de" MusineKit ", il faudra les ouvrir comme workspace (dans le dossier : MusineKit_Windows_2.31\Deplo...

rlgsbt

http://www.brainmodular.com/manuals/hh5 ... -spline-3d

rlgsbt

Dans usine, le port ouvert 2002 sert à recevoir les données. Par contre, il faut choisir le port 8000 dans les modules OSC pour envoyer vers touchOsc.
Chaque programme a ses ports d'entrées et de sorties et ils peuvent être changés si besoin

rlgsbt

like that.
For TouchOSC, the default host port is 8000 in Usine

in touchOSC editor, you have to create an OSC message in the text field :

rlgsbt

image panel.pat: (51.7 KiB) Downloaded 569 times

like that. In the list manager, you just have to choose "images files" in the file type option.

rlgsbt

You can use "Panel image" or "Video image player" module to display PJG and PNG

rlgsbt

There are some color inlet on the container module. Here is a patch with 2 colors affecting the background color of the container and the global color of the listbox

colorcont.pat: (18.97 KiB) Downloaded 470 times

rlgsbt

Do not use the toggle input, but COMP and ON ; the 2 switches will work the same.

rlgsbt

Hi GIlsornette,
In MotionKit, you could adapt the "Cells" workspace. It uses XY busses to control the matrix (with smooth and release).
+

rlgsbt

great

rlgsbt

rlgsbt

Pourquoi pas deux sorties audio : 1 en quadri et 1 en mono ? quitte à envoyer le signal audio via deux BUS séparés à la sortie du sampler MIDI

rlgsbt

try this : 2 arrays for code 1 and 2

CC values in array.pat: (43.28 KiB) Downloaded 556 times

rlgsbt

+++++++
I have the same problem each time I change the soundcard ! even if I know ithis issue, it takes me 5 minutes to figure out why my patches don't work.
I'm not sure the green or red color of the arrow is a good solution, but a pop up "the audio engine is not workking !" would be helpful.

rlgsbt

Le plus simple pour faire réapparaitre les presets : dans le rack ou dans le patch, cliquer sur l'onglet vue (l'oeil) et réactiver la case "show header"' Sinon, dans tous les instruments MotionKit, les chiffres 1 2 3 4 5 6 7 8 + S correspondent déjà à un module preset Capture d’écran 2021-12-16 0738...

rlgsbt

I'm on android & PC. It should be another name for the Lemur project (have a look at the 5th page from "Studio Combo")
here are good tutorial to begin with Lemur : https://liine.net/en/downloads/lemur
and this one for OSC on Usine : https://www.youtube.com/watch?v=1PJGYNEN2j4&t=1s

rlgsbt

To use Lemur with MotionKit patches, take the OSC messages and replace the busses X1 and Y1.
Here is an example using Box player. The "Multiball 1/x" come from the Lemur "Nexus 7 - studio combo" project. You also have to invert the Y datas.

rlgsbt

Les sessions verrouillées ???
MotionKit fait partie des addons de HH5. Tous les patchs et workspaces peuvent être ouverts et transformés dans (la dernière version d') Usine. Idem pour rajouter des presets en plus de ceux prévus dans MotionKit

rlgsbt

@Zined,
désolé, j'avais raté une partie de votre question. Pour les gamepads, il existe des logiciels tiers comme celui-ci : https://ds4-windows.com/

rlgsbt

Bonjour Gwennaelle,
voici un tuto pour l'usage de la webcam dans MotionKit. La démarche est identique lorsque l'on ouvre les wkp dans HH5 : https://youtu.be/fupPHY7IUSU?t=148
Tous les tutos sont disponibles ici : https://www.youtube.com/playlist?list=P ... xh9PxsxRwV

rlgsbt

hi Ales,
you can use any plugin you need in Usine...

rlgsbt

Hi Senso, Sylvain, The issue is not solved. You still have this probem with HH5.0.211012. When you touch the screen for the first time, you chan increase the x values, but you cannot decrease them (no problem with Y axis). Then, you have to use your mouse to decrease the values and you can touch the...

rlgsbt

Hi, in HH5, How can I use different colorsets and manage them in the setup/global menu (via the scrolling menu) ? what is the way to edit the \Resources\Colors\ColorSet.ini to get different colorsets ? 1 file ? several files ? and... is it possible to change the color set dynamicaly, without restart...

rlgsbt

text field would be great +++

rlgsbt

Bonjour Gilles,
Ce serait avec plaisir. Je suis assez pris ces prochains jours avec une création à la friche, mais peut-être en juillet ?
SB
diƒƒƒusion.com

rlgsbt

Hi Uge,
you can open the penbox workspace in Usine to see how it works. Most of the MotionKIt workspaces are available with the addons or your can download the old version "MusineKit 2.31" to get it : https://www.brainmodular.com/motionkit/ ... -to-action

rlgsbt

The joffo78's example is nice. I was thinking about someting easier. You have the same plugin on 2 different racks, with different presets. When you turn on the second rack/preset, the first one is still playing with its reverb tail. You can had another patch to stop midi in when the pther rack is p...

rlgsbt

You should use 2 items of the same patch (or duplicate the rack).
Another way is possible - but only for reverb - you do not use the reverb from your synth, and you send the synth audio output in another reverb plugin.

rlgsbt

You can use 6 switches. Switches can be grouped like that

rlgsbt

Hi Blugaruda,
Welcome in Usine.
If you want Usine to record/remember your preset with a VST, you have to create an Array from the VST's parameters, a "pass if change" and then write a new preset in Usine (not with the VST)

rlgsbt

connects the output of "set off B" to the reset input of the fader

1 button 2 switches C.pat: (25.71 KiB) Downloaded 473 times

rlgsbt

You have to deal with "pass if change" module.
In this example, you can turn off switch B by clicking on it or using the button "set off B".

1 button 2 switches B.pat: (25.49 KiB) Downloaded 488 times

rlgsbt

another problem : with the MIDI sampler, the global pitch works only with integer. Senso, is it possible to change that ?

rlgsbt

Hi Ariajazz
Here is a simple patch, but there are many ways to do it.
You can also try the "group" option with many switches.

1 button 2 switches.pat: (23.09 KiB) Downloaded 498 times

rlgsbt

Bonjour Zined, MotionKit est gratuit et ne nécessite pas d'achat de licence. Dans MotionKit, la détection de mouvement fonctionne grâce à votre navigateur. Il faut simplement autoriser l'utilisation de la caméra lorsque s'ouvre la page https://www.brainmodular.com/posnet/camera.html Attention, pour ...

rlgsbt

it's funny, I've forgotten this post from 2015...

rlgsbt

Hi dmitriyc,
To turn pages, you can also use "MotionKit" with a simple webcam. The workspace Slideshow does the same : https://youtu.be/btF5hUWRv1g
Movement detection still work in HH4 and should be included in HH5.
+++

rlgsbt

to delete line (but it's tricky). Pull down the line and when it's the last place, then change the number of lines

rlgsbt

Bonjour Xavier, il faut que safari soit "actif" : laissez un bout de fenêtre apparent pour avoir simultanément à l'écran MotionKit et Safari.

rlgsbt

Some module are not yet implemented in HH4. but most of these wkp were already present in MusineKit 2.31 (additive/addix). The old one should run (but without motion detection)

rlgsbt

No, you can't...
...but it work anyway offline with the cache memory of your Internet Navigator

if you ran it online before

rlgsbt

Well, I don't understand why you have to save patches, rack and workspace. If you open the original workspace on HH4 (from : \MotionKit Windows64 1.0.201013\Deploy\b - Workspaces\Path Groove.wkp) it should work ! Have you also tried to open the Musinekit version (ie. Homing Pad) ? from addons or dir...

rlgsbt

For me, Path Groove works perfectly on HH 4.1.201104 (win64). The movement come from the "trajectory module" and a ramp.
You also can move the ball with 2 BUS X and Y (look at the XY pad).

rlgsbt

Hi Gilsornette,
If you want to edit Motionkit's patches, you have to do it via Usine.
Some module will probably miss (not yet implemented in HH4), but you can also edit the older version of MusineKit without problem.

rlgsbt

I haven't tried the Rig to, but by the way, if someone sells "Hot hands", I could be interrested.
Hot Hand has been discontinued

rlgsbt

Bonjour Elsa, Il faudrait peut-être envisager la stratégie inverse ; mettre les séquences à cheval sur plusieurs sections et régler la 1ere section à 14234 ms pour avoir le déclenchement du son précisément au début de la 2e section. Sinon, lorsque tu glisses des sons sur la même ligne, Usine ne crée...

rlgsbt

Bonjour Yan, Je continue en français ; ce sera plus simple (et peut -être plus clair). L'idée, ce serait d'avoir une suite de listes dans une sorte de file list manager , mais que ce dernier envoie le contenu de chaque liste quand celle-ci est sélectionné (et pas simplement les suites d'adresses, co...

rlgsbt

I often have to deal with a lots of media files (images, videos, etc) and manage them with list (a lots of lists and folders). To recall quickly different list of many file, I would need a "list manager for list" with an output providing each list contents in comma text. Something like the "samplerb...

rlgsbt

It would be helpful to have rack name (caption) when it's reduced

btw, reduction is great !
thanks

rlgsbt

Très bon tuto (et très bonne chaîne Youtube) : à promouvoir dans ce forum sans modération.
Félicitations

rlgsbt

Hi Gilles,
here is a simple wkp I've done last week to manage the bitmap output as HD video:
download/file.php?id=79

in this solution, the oscilloscope is hidden to provide a 1920x1080 windows.

rlgsbt

Hi Gilles,
in HH3 and HH4, I guess you could rename and edit your devices with a texte editor. Here is the path folder : Usine Hollyhock Win64 3.0.188ConfigDefault Devices
May be have a try with a copy of your folder

good luck

rlgsbt

Hi stferro and welcome. There is no midi output wired in Arprix. You have to create one. Enter the patch and create a midi output form the 2d "transform" module. http://www.sensomusic.org/forums/uploads.php?file=arpix%20MIDI%20out.png If you don't want the sampler sounds from the original patch, jus...

rlgsbt

may be if object touch is off, then turn the note off and the xy to 0 ?

rlgsbt

Hi Oli, I don't want to loose the modular part of Usine, and I also use the curve mapper when needed. The problem is that midi learn curve and scale react in different ways for a single object (faders and knobs). We are "Usine power users"! but for a newbie, It could be disappointed to have in the s...

rlgsbt

Hi, Would it be possible (for HH4) that the midi learn curve (+ coeff) and the scale be the same for faders and knobs? Now, you can have a linear scale with a log midi control ! or both, etc. I'm used to it, but it might be cool to manage a fader with the mouse/ touch sreen and have the fader react ...

rlgsbt

i2M musicport from sonuus is quite good too. It's hardware and it works with a lot's of timbre.
http://www.sonuus.com/products_i2m_mp.html
then, you can send your fx from a midi note

rlgsbt

rlgsbt

GREAT ! thanks 23fx

rlgsbt

Many thanks 23fx23,
I've never noticed this !
It works fine :

rlgsbt

In the subpatch options, would it be possible to add (or replace) inlets and outlets of a subpatch by a single array inlet/outlet ?

could look like this :

Thanks

rlgsbt

It would be nice to have array input and output when you use a patch as sub-patch, with all the parameters, in the same way than VSTs.
And it would be cool - for sub-patches and VST's - to export a kind of snapshot of a state (as txt file or csv ?) to backup presets.

for HH4 ?
thanks

rlgsbt

Excuse me, you're rigth !
maybe Musinekit would be a good solution ?

rlgsbt

you can run Usine without licence and you can also use the "protect mode" to share your workspaces.
It's even easier than Max

rlgsbt

By the way, it would be nice to have an "inverse" button for the X and Y values, especially when you use the XY pad to control an external XY interface, most of the time the Y value goes in the wrong direction. (I know it's easy to patch an X-1)

rlgsbt

changing the default inlet with "can't be randomize" is a very good idea ! As Sylvain, I use often the "chaos" for testing my patches, finding some new presets, etc. It's very efficient with synthesis. I also need to hide a lot's of stuff and controls to create educational tools (random is fun for k...

rlgsbt

one more...
I understand the will to randomise only visible control (and to use IB mode), but if you close the patch or if you put your controls in a closed popup window, it's dead !

rlgsbt

The discussion is open !

And inlet doesn't work as well. Here's an exemple :

rlgsbt

and it's the same with randomise inlet's object !

rlgsbt

Hi, The "randomize patch" fonction only works with items wich are visible (Usine Hollyhock Win64 3.0.153). If you hide an element (matrix, fader, button, etc.) it doesn't work anymore. Would it be possible to change this ? I need to randomise 12 different parameters with only 1 trigger, and I jus ne...

rlgsbt

you can create a rack with all your sends, inputs/outputs and save it to "Usine Hollyhock Win64 3.0.139ResourcesTemplatesRacks". Then, your new rack will overwrite the default one.

rlgsbt

Yes, it would be nice to have something like Syphon in Usine, but it have to work both with PCs and Macs !

rlgsbt

+++ very usefull !

rlgsbt

rlgsbt

23fx23, It an amazing & great Job! For PC users with touchscreen, it's a kind of lemur killer.

many thanks

rlgsbt

Of course, I can manage the different devices, but I would like to have the "good" device at the output each time I create a new rack. To avoid mistake when I'm working in surround and when I forget that the new track is just a stereo one

rlgsbt

It would be nice to choose the default audio Out by wkp. If I work with surround, each new rack output would be set on the good device output automatically.
thanks !
rlgsbt

rlgsbt

merci Senso

rlgsbt

thanks

rlgsbt

Lorsque l'on crée un point dans le grid, il faudrait pouvoir taper précisément la valeur et la position. Peut-être avec un double clic pour accéder à la valeur ?
merci

rlgsbt

Except if you have a program with your hardware to mute/solo datas, you should forget midi learn for XY. Just type the good values in Usine (for example, cc1 for X and CC2 for Y).

rlgsbt

Hi,
It would be nice to have markers and/or regions for navigating in the grid. When you have a lots of sections, it sometime difficult to find what you want.
rlgsbt

rlgsbt

Hi,
it would be nice to type points/curves values directly in the grid and set the points on the time grid. Cause it's moving when you add or change sections.
By the way, I watched screen capture by Hervé Birolini and HH3 looks great...

rlgsbt

rlgsbt

Hi, I'm working on several workspaces with very different uses and here are some suggestions for HH3 : - Record midi and automation performances (a kind of event list as text file ?) - plz, add a "reverse" inlet in the midi sampler. - It would be nice to export media files used in a workspace in a s...

rlgsbt

thanks Nay-Seven,
A 2d reversed bank is a good idea, but my banks are very large (about 150 sounds) and evole on each new concert. It would be difficult to manage. May be in HH3 ?

rlgsbt

Hi,
Is it possible to automate or trigger in real time the "reverse" option for each sound in the new MIDI sampler ? I can edit this option manually in the sound list, but I would like to affect a MIDI learn for all of them in the same sampler.
thanks

rlgsbt

rlgsbt

3 impros en live sans plantage ni freeze ! Encore merci Damien pour cette solution

rlgsbt

Merci Damien pour ce retour. Je teste cela en live cette après-midi !!!

rlgsbt

Bonjour à tous, J'ai un problème ponctuel, mais récurrent sous Usine depuis la MAJ Windows 10. De manière inattendue, le pilote graphique plante (" le pilote d'affichage ne répondait plus et a été récupéré "), avec un freeze de l'écran (malgré la récupération), mais uniquement dans Usine . Par aille...

rlgsbt

Hi, You can use the fonction "map" to split the analog inputs. void loop() { // read the input on analog pin 0: int sensor1Value = analogRead(A0); // print out the value you read: Serial.println(sensor1Value); delay(10); // delay in between reads for stability //...

rlgsbt

Thanks 23fx23,
Substract modulo result from original value is good ! but for concat string, I want to have 2 digits (from 01 to 59) even if the input is 1, 2, 3 ( I want to turn it in 01, 02, 03... 10, 11...).

rlgsbt

Hi,
How can I turn "3" into "03". It's for a clock or a counter.
thanks
SB

by the way, is it possible to get the rests after a modulo ?

rlgsbt

Thanks Senso,
A list to display affected control will be enough. And it will show where are problems

SB

rlgsbt

When you apply a midi learn in the mixer (on the fader from a rack), you cannot manage it in the rack itself. So, you can get 2 different midi messages, one from the mixer, and one from the output of the rack. a bit messy... (2 hours on a patch to find what happened :/) is it possible to fix it ? th...

rlgsbt

By the way,
Intuos tablet is working fine with the mouse module (without pressure data), but not with the HID devices module : you can see it but you can't connect the tablet.

rlgsbt

a Midi (key & OSC) mapping list would be helpful to recover some presets. It would be also precious when you change MIDI devices. For each wokspace, we could have the mapping for (all ?) the main fonction. Of course, it's closed to Ableton live, but it's still a good idea...

rlgsbt

Is it possible to get the pressure-sensitive datas ? It's working fine with Photoshop, but I can't find it with the "mouse module"
thanks

rlgsbt

Would be nice to use a chromecast for mirroring video or display the toolbox (for musician return)...

rlgsbt

OK. thanks

rlgsbt

Hi
Is it possible to clear a sample range in the new Midi sampler ? look stupid, but I can't find this fonction !
thanks

rlgsbt

Thanks Nay. I will have a look

rlgsbt

By the way,
Is there a module witch could give the time passed or position in real time from a sampler (hh:mm:sec.ms) ? not only sec or % ?
Thanks

rlgsbt

Salut Mko
Par exemple ?

rlgsbt

you can also use the module "change scale" and invert values between in and out values.
for example change the scale from 0 to 1 in 24 to -24 (the module will invert and change the scale)

rlgsbt

I actually did a script to do Serial to Array, and vice versa for my needs. So the get and set modules can be used, as well as the que data module for doing such thing. You could create a polyphonic sub-patch to do such a think with pure-modules rather than a script. If you are needing help let me ...

rlgsbt

Thanks. I will ask him.
Anyway, all examples are welcome !

rlgsbt

headphoner wrote:Ok i found it

i will post some examples.

Hi. I begin on Arduino and I'm searching for patches/wkp to manage several sensors at once in Usine. Do you have some examples to post ? many thanks

Welcome to %s forums

Search found 186 matches