Welcome to %s forums

joojoo1234

I have actually learned a ton about this in a matter of a few days bear with me.

joojoo1234

Okay, well my situation is I want to load a wkp and I don't want the sequencer to start automatically and I don't want the audio engine on. Just tell me how to avoid this please. Thanks.

joojoo1234

I still want to launch samples but as far as loading patches in the sense I think you mean I won't do that.

joojoo1234

joojoo1234

okay let me do that again - the audio engine is lit as well as the play button on file load - I want the opposite. always

joojoo1234

and the piece starts I want the wkp to load with the audio engine off and the sequencer unlit - whats the method to insure this?

joojoo1234

love it.

joojoo1234

What is the deal with how the sampler calls up files in the list as I am getting randomness in regards to which file it calls up in the alphabetical order. I assumed I needed to make my first file it calls up B and my last one A as it is moving to the next and playing it every keystroke and that wor...

joojoo1234

please

joojoo1234

Okay almost done with this project. I am putting A B C in front of my file names and clicking sort in the sampler window. If there is a better way to do this let me know.

joojoo1234

there needs to be something to move these files up and down in my opinion in the list

joojoo1234

nevermind

joojoo1234

on the sampler list window it doesn't seem to do anything. How do I move a file around?

joojoo1234

Big arrows should appear on each side of the curve that tells you whether the notch to the left is above or below you - same for the other side. I think...

joojoo1234

In what I am doing - don't need the scenes - do you use them to help setup - are there any benefits derived from using scenes as opposed to just loading up the file- I guess if I am accompanying a live musician it would help to have one scene rather than just hit on instead of off...

joojoo1234

joojoo1234

Never mind got it - just stretch it when not in locked mode. I am only bugging you this week and for the next few days. Then I will have time to breath.

joojoo1234

is it possible make one big button on the interface to launch samples if I decide to not use a key?

joojoo1234

Hey thanks so much - its simple - have to learn the logic of this stuff my wires were a little off as I already figured the wait stuff but I was a little off

joojoo1234

thats it - I am a newbie. Learning Learning...
I have done it and it goes through with the button but now just loops the one sample... anyway I will sit down and give yours a go as I am sure it will work. Thanks!

joojoo1234

this is my last thing - have figured out alot about Usine and figured out how to add more buttons to the sample trigger by buttons batch and get the selector and the ab thing to work... now I need a button that will allow me to select through... I guess I will assign a letter which I have not done b...

joojoo1234

love the livepack - gets you started. Helps you understand Usine if you tear these patches apart.

joojoo1234

Thanks for answering. Real briefly - what I was saying when you load a wkp from one usine install with another usine install and save it in the new usine install does it copy patches in the new usine folder or does it pull over waves and patches from the old install when you reload it.... this may b...

joojoo1234

I know I am a pain but... I need to put an equalizer in the chain of 13 tracks- nothing in the grid view... (depends on how you say it but all patches on tracks in seq) so... should I route all tracks to track 14 and put a mixer there or a vst - how would be the best way...? efficient.

joojoo1234

Well I got the computer to not stumble by eliminating half the random small files it was bring up in one patch - didn't matter much and I disabled my local internet connection inside my computer so no hidden program could spin... think I have some junk on this - its so hard to keep off... it worked....

joojoo1234

One thing that would be incredibly helpful is - for the live patch or for specific patches or modules what are those specific things that are cpu costly - would limiting the range of pitch help or the length of something or the rate of cycle.... you know what I mean. I like this.

joojoo1234

1. If you install a new version or copy in Usine. And pull the workspace from one to another new version or not. Does it put the patches in the new version or copy of the same version or is it pulling these patches from the old folder. 2. I had an occasion where it brought up in Absynth the wrong pa...

joojoo1234

I have finished my first piece in Usine. I like.

joojoo1234

I'm good now.

joojoo1234

well I installed everything and my vst's are not showing up. And they have been installed and rescanned with the correct directory - this happened when I dragged a patch with windows into the demo folder... I also renamed the demo folder... is that bad?

joojoo1234

even after rescanning? Help - using Usine got it going fast!

joojoo1234

I think I got it - only the first 3 outs should be lit on the setup dialog - which are 3 virtual outs - I was lighting all 5 and wondering why this was such a wreck. Not sure I dig it though.

joojoo1234

While I am commenting I wish at the bottom in grid view their was a point and click down the line row - one for each speaker or channel and just light them up 1,3,5, or 1,2,3, instead of the menu box (it seems weird by the way to have a 5 and a 6 being chosen for me when I am not using a sixth chann...

joojoo1234

This is what I am talking about - the left right left right stuff dealing with surround sound as some people go 1,2,3,4,5, etc in a circle and some count it differently as 1,2,front 1,2,back and then a center and sub - I guess the point I am trying to make is its weird to have them thought of as Lef...

joojoo1234

thanks for replying by the way.

joojoo1234

I have got 90% of it gone by loading basic services and lowering my graphics card acceleration and eliminating the firewall on my firewire which I did not know I had... I will look at the other 10%

joojoo1234

as its a little embarrassing. I have not found the answer to this... I have a 10 output interface and this software allows me to put both a left and a right to a channel - furthermore on output 2 it allows me to choose 3/4 left and 3/4 right - I am wanting to output 5 speakers to my 5 speaker system...

joojoo1234

the sequencer window should zoom by the scroll wheel to where the pointer is if this is possible... like other daw's with waves instead of patches.

joojoo1234

it would make exploration easier.

joojoo1234

My 1010 saffire interface gives me static more and more as I work on the using project and I have to reset it to clear it. It is sitting on my computer - is this the problem as I have killed my background processes... anyone know a good site where these things are discussed. I am a wood and steel mu...

joojoo1234

I will - I think a beat follower is what I need to sync the pan to these tempos- trying to create a spinning room at diff tempos and accelerations.

joojoo1234

this is in a surround 5 system

joojoo1234

And I wish to have multiple tempos withing this that are panning and accelerating as well. Any ideas? Figured out basic tempo thing. Will read more...

joojoo1234

add to this so you know I will be putting other long irrational tempos within this framework and spinning them into the old tempo as it accelerates.

joojoo1234

okay I will be bugging people for the next couple of weeks about Usine as this is a crash learning project. First up. I need to write a piece that will accelerate from 10 to the minute to 500 or 800 to the minute over 10 minutes. I will do other stuff in here of course but this is the basic framewor...

joojoo1234

Yes - I would like the 800 from RME but at 1500 thats a no go. We all have to make compromises and I think as I primarily think of myself as a acoustic minded composer I will go with the class a mic's in the firepod. That way I can get "good" of both. Thats what I am thinking since I last posted. Th...

joojoo1234

http://www.tweakheadz.com/microphone_preamps.htm

thought I would reply to myself on an article with just my topic concern if anyone is interested... as far as what I would like - the rme fireface 800... but ... $$$ considering the mackie f400 or the focusrite 10 i/o

joojoo1234

This message is for those who have used quality preamps. I am needing a better daw interface and my girlfriend who is a classical pianist of very high quality is wanting to make an album. We would like to do it ourselves. However, I am wanting an extremely good result while she (as she just told me)...

joojoo1234

As I think this is becoming more and more popular have you thought of having a separate area dedicated to the issues of surround with Usine and implementation of patches? Perhaps with patches its not the issue and I have yet to understand more. I am curious as to how I will go about sweeping sounds ...

joojoo1234

I guess not. Anyway done it the old fashioned way.

joojoo1234

My problem is this is a lot to learn, how to design these patches and I have a great deal of music to write in the wood and string world (have a recital coming) I can't wait until I understand it better before I dive in which means going down wrong alley's. Oh well. I am going to break down my tasks...

joojoo1234

Anyway so I can get sound from another app through my normal asio driver into usine with the virtual inputs and pass it through to the virtual outputs of usine. Is this correct? I am doing it anyway. So what is the rewire for? I this happening simply because I installed the asio 4 all or the virtual...

joojoo1234

Well I am confused, I know that energy is a vst as well so don't bother mentioning that. I as an example used audio repeater to send data from energy to usine - anyway - virtual cable supposedly needs aiso 4 all in order to work and... where to start... I was getting without audio repeater sound in ...

joojoo1234

I have emailed the company about Streamboy if it will do multichannel audio - I am not experienced enough to tell by looking at it and the manual makes no mention of the work multichannel or surround so... maybe multiple instances would do it. Will look at Virtual Audio Cable - had no idea these exi...

joojoo1234

Stream boy. Good find!

joojoo1234

I will never post this long again. I am not doing the programing work so its easy for me to say. I have to say that Bidule has rewire and I hate that someone would possibly ignore Usine for the lack or rewire or full vst implementation. To grow Usine I think its important to remember that going into...

joojoo1234

Does the vst format have some sort of self identifiying tab in the code of some sort that a program could use to identify it as not merely instrument or effect but eq or reverb and such. I made the mistake of downloading every vst for the last few months and not paying attention to downloading to sp...

joojoo1234

Yep. Not all DAW's run as a vst as you know, that's all. Spent hours today learning and reading up on Usine. Senso is not going to go to all the work of a vst unless he can think of valid reasons why that would be useful I assume. I think it is that if I have tracktion and not energy or don't want t...

joojoo1234

Well as I am getting to know Usine today and reading its more about giving flexibility that tracktion or even energy doesn't have rather then giving usine more flexibility. Anyway.... why am I posting, I am just learning it. Seems cool and it is the program I am using for my violin and synthesis pro...

joojoo1234

Learning Usine... wanting multichannel file support and vst version as a substitute for rewire... by the way if rewire is a money thing perhaps we could all donate it... but I think I read somewhere that vst is easier to implement than rewire which seems surprising to me for some reason... I have no...

Welcome to %s forums

Search found 60 matches

Login • Register