Welcome to %s forums

noise2sine

Hello,

Unfortunatly i can onlywork with long file ... but i have another question ! how can i record only CC values on a midi file ?

noise2sine

Thank you for your precious help . My need was to generate a CC automation curve in usine and send it to a machine that only get DMX input . i thought that it would have be possible to convert the CC signal but i didn't think about the cable issue !!! So in fact i need to still send CC values throug...

noise2sine

Thank you for your answer ! i'm sorry not to be clear ... If i understand well , there 's a DMX module that already do the job ? My need is to be able to send DMX values ? i have read that they are from 0 to 255 ? Do they can be sent through Midi out ? with a classic midi cable ?

Thank you !

noise2sine

Hello,

Is it possible in Usine to convert from a CC value module data into DMX values ? I have a patch which send CC values but i need that this patch can send CC values converted to DMX ?

Help !!!!

Thank you !

noise2sine

Thanks

Can you make a screen shot of your CC change patch ?! ican't make mine working !!! Sorry but i didn't use Hollyhock for such a long time !

Thanks ! !

noise2sine

Thnaks for your answer ! i can see a bit more how i can set this up then . The CC value patch used in the example, Which module did you use ? I did a little example and i couldn't find how to make the CC value fader from the patch visible in the grid section ??

Thank you !

noise2sine

Hello, I need to create a project with just a long audio file around 60 minutes on one track and a second track consisting of just an automation curve sending control change . The idea is to be able for example to set at 2m30 a 63 CC value and so on . Is it possible in the grid mode to have a detail...

noise2sine

Thank you very much for your answer ! i will check this out and probably come back here !!!

noise2sine

Hello, I'm collecting info for a project which consist of making turning a big block of speakers (16) packed in a pyramyd shape . I have a special engine designed for that and it's working with a motor speed controller . It can turn 60 turn per minute and the weight of the pyramid is around 150 Kg ....

noise2sine

Hello,

I was wondering if someone would be interesting in creating a workspace with patches in the style of the great Ryoji Ikeda

I think Usine Hollyhock would be of great tool for that .

https://youtu.be/0sfn3rTwGl8

Thank you !!!!

noise2sine

Hello Sylvain,

Thank you very much, it's working perfectly !

Cheers

noise2sine

Yes i did

noise2sine

Hello,

I'm using anolog synth in my set, and it would be quite cool to have a tuner module in order to tune my oscillators when i'm playing

. Is there an existing tuner module already ? OR someone would be interesting in creating one ?

Thank you in advance.

noise2sine

Hello,

I'm using a Synch module in my workspace in order to set different tempo in my set.If i'm setting the tempo to 120 with the fader i can see in the top windows that the value of the tempo is 120.01 or 120.02 how can i fix that ?

Thank you

noise2sine

Thank you !

noise2sine

Thank you ! that's working fine !

noise2sine

Hello,

I used to know how to rename a preset from the previous version, but in this one i can't find it !!, I'm right clicking on the preset and there is no option in the menu for changing its name ?

Thank you !

noise2sine

Hello,

I'm using the Novation launch pad mini in my workspace and i want to be able to lit some specific cell i'm using as midi control .
For example the first cell of the first row should be green because it's my play button.
Is there an existing module for that ? how can i make this ?

Thank you

noise2sine

Thank you very much for the patch ! it's working perfectly for me

.

noise2sine

Hello, I'm using a midi file player patch and a sample player . My need is to use the previous and next button of the two players in order to change loop in both of them at same time .I'm using the key map for both so they change file together at the same time.The problem is that midi file player is...

noise2sine

thank you , works perfectly

noise2sine

Hello,

Which is the best way to set a whole workspace as slave with an external midi clock ? I have an external drum machine which i want to be the master clock and all the patches in different tracks in the workspace would be slaved to that clock ?

Thank you !

noise2sine

Hello,

Is it possibe with the video file player to have a fader that can allow to play the video backward to normal ?

Thank you

noise2sine

thanks that sound amazing ! do you have any time estimation for that ?

noise2sine

Thanks four your answer ! i will try this . Do you know if in the HH4 it will be possible to have a video rec module ? it would be a dream to be able to record video flux direct into a video file

Thanks

noise2sine

Hello,

I have a patch playing videos , and would like to know how to record thoses vids on a video file ?

Thank you !

noise2sine

Thank you i find it !

noise2sine

Hello Sylvain,

Thank you very much for the patch ! how can i change the actual color during fade process ? Now it's yellow how can i make it black ?

Thanks again !

noise2sine

Hello,

I was wondering how make simple transition like fade in and out with black between two videos on two different patches ?

Thank you !

noise2sine

Hello,

i have tried using video in Usine and it 's great ! I have closed the main video output windows and i can't open it again ! I can the video running in the patches but can't find a way to re open the main video window !
Where can i find it ?

Thank you !

noise2sine

Hello,

Thank you very much for your answer . I can know understand why it was so weird ! So i have created new samplers and it works fine.

Thanks again

noise2sine

Hello, I'm facing a lot of difficulties making the workspace preset working ! I'm using 4 samplers and it's really messy when i'm trying to save preset. The sample are not recalled and sometimes they are ! but in a different order ! How the worksapce preset manager is flexible ? I mean if i'm adding...

noise2sine

Hello,

I was wondering how to automate the write and new button on the workspace preset manager ? I can do it with the arrows ...

Thank you

noise2sine

Yes thanks i missed that i had to disconnect and connect the unit while Spark is running ! Working for now ! thanks for your advice ! very useful!

noise2sine

Thanks it's working now ! i saved and reload the project and the connection failed ! What the hell is going on !!!

noise2sine

Yes that's what the manual said and i have turned the spark in and out off in the device panel . I can't find other input or output !

noise2sine

Hello Nay, I'm using Windows 10 and it's updated,The version of usine i'm using it's the Hollyhock 3.0.88 64 bit . I can see the device in the midi option and i have tried many ways for connecting it without any success. The Spark is connected without any USB hub . Please i need help because i have ...

noise2sine

Hello,

i didn't find a solution yet for making the SparkLe working ! Maybe someone can give explication for making it work ! such a shame because it's a good tool and in Hollyhock it must fantastic !

sos

cheers

noise2sine

Whaooo !!!! thanks a lot for your super detailed answer !!!!i will test this straightr away and thanks again !!

noise2sine

Great to hear you are making a patch for the BSP Â§

How do you set up which one is setting the clock ?

noise2sine

Hello,
I would like to use the Beatstep pro as slave with Hollyhock . Does anyone can show me how i can create a patch that make the beat step pro synch like play stop and tempo ?

Thank you

noise2sine

thanks works fine

noise2sine

Hello,

I was wandering how can i send a program change message when recalling a preset inside a patch ?
I already have the module in my patch but i have to manually press the create button to send the message .

Thank you

noise2sine

Great ! When that version will be available ?

noise2sine

Hello,

Is it possbile to move up or down a preset in order to re arrange the list ?

Cheers

noise2sine

Hello,
Iâ€™m looking for an idea for sending program change within an existing patch ? Any advice ?

Thank you

noise2sine

Hello, I didn't find a way to make it work with the controller yet ! ihave tried many ways but without success ! i have started the engine and then the connect button , thicking input and output in the midi control panel.... In Ableton in order to make it work,each input and output must not be selec...

noise2sine

thanks, that's what i was looking for !

noise2sine

Hello,

I'im using the workspace preset mananger and i didn't find how to quantize the preset arrows ? and it's the same for the preset manager inside a patch ?

Any idea ?

noise2sine

Hello,

I'm tweaking the pitch fader during live performance and would like to have a button in order to set the value back to zero ? Any idea ?

cheers

noise2sine

didn't find it !

noise2sine

yesi would love to ! but where to start ?

noise2sine

Helllo,

When i'm using the preset manager for the sampler, i can't find a way to quantize the next and previous button ? i can do it on the list of preset but not on the arrow symbol !
can anyone help ?

Thank you !

noise2sine

Hello,

i used to use the conductor a lot in Usine V5 , does anyone know how can i use something in order to save global snapshots of settings from different patches and being able to switch between different settings during live performance ?

Thanks !

noise2sine

Hello, I'm using the mixer pannel in the Interface builder mode and i can't manage to see the aux/send fader ! I can drag into the mixer pannel the volume fader but i can't do it for the send fader. My intention is to be able to have the mixer pannel in the interface builder mode with the send fader...

noise2sine

Hello !

Thanks for yr advices, i will try that way and let you know .

Thanks again

noise2sine

Hello, Anyone is using Arturia Spark LE in Hollyhock ? I have problem with the Spark controler to be reconize when i'm in Hollyhock ! The plugin in a patch is working fine, but i can't make the controller working. I have checked the midi option and everything seems fine. Do i need to make a specific...

noise2sine

it's working perfectly , thank you very much

noise2sine

Hello,

Sorry but i didn't manage to do what you said : i have a list box and the master sync module. The comma text outlet of the list box is conected to the bar list of the synch module . But i didn't find a way to create the list

What am i missing ?

thank you

noise2sine

Thank you i will try !

noise2sine

Hello, In the old days i was using the conductor ( USINE V5) in order to change the time signature.The preset in the conductor allowed me to recall settings and sample and time signature. for example preset 1 : is 4/4 preset 2 : is 7/16 How can i reproduce this in Hollyhock ? thank you :)

noise2sine

thanks for the info

noise2sine

Thank you !

noise2sine

Hello,
Is there, somewhere a simple pan patch (left,right,center) ?

Cheers

noise2sine

Hello,

i didn't find in the manual how to create new banks for the midi sampler ? what is the dirference between a list and a bank ?

Thank you

noise2sine

Thanks, yes the Midi sampler is perfect, but the others too

.

noise2sine

Hello,

It seems impossible to download the version 5.8 from the download menu,there is a server problem.Am i wrong ?

noise2sine

Thanks, the pad kontrol is more what i was looking for.Anyway i think it can be cool to have a little patch for managing drum kits.My dream is to have one small like the drum rack from Ableton plus a delay...All in one

noise2sine

Hello,
I think i saw a drum rack module in Hollyhock close to the one proposed by ableton Live and unfortunatly i can't find it again, where can i find it ???

Thanks

noise2sine

Hello,
I'm already a platinium member and my license is over since june 2015,how much do i have to pay for one more year ?

Thanks

noise2sine

Thanks a lot for your answer, i will check this out !

noise2sine

Hello,

I'm wandering if ithere is a way to use color information while using the APC 25 and USINE ? This controller is made initially for Ableton live and it works really fine,but it can be good too with usine,any ideas are welcome

Thankss

noise2sine

Désolé, je réponds un peu tard....Oui je suis sur Marseille, je suis intéressé par cet atelier,comment s'inscrire ?
Merci

noise2sine

Hello,

I'm using a patch for muting all midi notes except one (i'm using that patch for controlling midi drums pattern on one file) .The problem is that the fader value is midi note numbers and would prefer midi notes names like c1,c#1 etc...
How can make that ?

Cheers

noise2sine

Hello,

Is it possible to extend PadKontrol Patch to 36 players using the polphony ? i didn't manage to do that

Thanks

noise2sine

Thanks a lot Nay !

noise2sine

Hello, Je trouve cette initiative très bonne,en revanche je suis resté sur la V5 pour différentes raisons,mais j'aimerais bien tester Hollyhock.,Le groupe de travail dont tu parles pourrait il accueil des personnes ayant mon profil ? A savoir une connaissance de la V5 mais pas avec Hollyhock mais av...

noise2sine

is it making a difference if i'm using a piano roll ? i have just a midi out, whereas in yr example there is code 1 and msg out ?
I didn't find the = module ? And for the matrix module there is a lot to choose in the list,which one do i choose ?

noise2sine

Sounds like a great idea ! how can you make that ?

noise2sine

Hello, I'm using Native Instrument BATTERY 3 with Usine V5.I have made a simple and cool patch to control Battery.But :) I have created 54 faders in order to control the level of each cells, it is working fine but my wish now is to be able to see which cell is playing in the USINE interface ? I need...

noise2sine

Hello, In the Usine v5 is there any restriction concerning the numbers of snapshot in the conductor ? i have done 137 and save the workspace.When i have reopen it all the settings were gone :( . I still can see all the snap shot but they are not working anymore . How many is the average number of sn...

noise2sine

Thanks Nay i will try

noise2sine

Hello,

How can i translate keyboard message to midi message ?

I'm using Usine V5

Cheers

noise2sine

Working perfectly

thanks a lot !

noise2sine

Hello,
I'm using Usine V5.My question is about controlling a fader with two knobs . For starting the fader would be set for example on 12, the first knob would turn the value to 0 and the second one to the previous value 12 ?

Thanks

noise2sine

Hello, Inside the patch you will find two restart button because they are in relation with going up (key learn + ) and down ( key learn -) with the conductor.They have the same key learn.Everytime i'm going up or down with the conductor the restart button is pressed so even if the sampler is in loop...

noise2sine

Thanks for the patch

I found an another way to get the result expected : i have used an event module ( 1 to 0) connected to the start position of the sampler.It's working perfectly.

Thanks

noise2sine

Hello, My question concern the Sampler Player in Usine V5. Is it possible to have the same possibility as with the piano roll to set the loop mode and at the same time having the play button working ?I have 8 different piano roll, and all are in loop mode, and all have their play button assigned to ...

noise2sine

Hello waolelaid, Beyond the joke,if i can give you an advice :is to keep the things simple.For my part i'm still using Usine v5, and it works fine according to my simple needs.As an average musician and composer,i realised that the tool can't replace the worker.I have tried many "complex configurati...

noise2sine

@waolelaid : Why don't you play tennis instead ?

noise2sine

thanks a lot Nay !

noise2sine

Hello, I'm using the version 5 of Usine.So i wanted to create mute button for each sampler.So i used the mute module and used the polyphony.The problem after that is that all ptich knobs are corrupt after that manipulation .Is there another way for creating 16 individual mute button for that patch ?...

noise2sine

Even with the version 5 ?

noise2sine

Hello, I'm facing the same problem with the other step sequencer in the patch, i can't find the other matrix corresponding to the others sequencer in the patch.Even with right click and "find in patch" nothing happen contrary to the first sequencer. I think it's because of polyphony. How can i solve...

noise2sine

Thank you Nay ! it's working perfectly

noise2sine

As i have uploaded the the bugged version, it's seems that the patch is broken. Here's the new link : http://www.sensomusic.com/forums/uploads.php?file=Polyrhythm%20sequencer%20test%202.wkp The values of the steps should work in this patch, my question is where can fix something if it's blocked agai...

noise2sine

Yes it's Usine 5

Nothing is working ?

noise2sine

Hello, I have made a simple a version of a patch named "Polyrythm sequencer". In my version there is no more sampler or Fx. The patch is only for midi.This tool is really great.But i have a regular bug at some point.When you press the edit button, you have access to the different steps where you can...

noise2sine

it's a very cool patch ! i'm still using the Usine 5.80. I was wondering how i can change the note knob with a knob with midi note names (c1,c#1) would be more practical for me because i'm using it with battery.

thanks

noise2sine

Thanks Joffo, For which version of Usine is it for ?

noise2sine

whaoouu! Great ! When can we test

noise2sine

Hello,

Does someone can be intersted in creating an Euclidean Rythms patch for USINE ? Like this one :

http://www.youtube.com/watch?v=KKbYdExy3jQ

That one is really cool, but it's not a VST ....It would be really great to be able to use as a VST (sync wiith the host)

Let me know ....

Thanks

noise2sine

@AndrewChi : Yes i'm using Usine 5. As i'm working with hardware synth , my midi configuration is very simple, one track per machine with a different midi output for each machine. I'm using piano roll, midi freeze,accumulator and some customizabled midi patch like a midi delay with an LFO on the pit...

noise2sine

Hi! I'm really surprised to read some disapointed comments ! when guys say it was working so well with the version 5 and now it's a total mess with hollyhock ! so why don't you carry on working with the version 5 ? why wasting your time ? Hollyhock seems to be a new start, and i think it will be bet...

noise2sine

Thank you so much for the two patches ! They are working perfectly, and true, the second solution is better now.

Thanks again

noise2sine

Hi, Some times ago Nay Seven made this patch : http://www.sensomusic.com/forums/uploads.php?file=Conductor%20and%20program%20change.pat In this patch, while changing snap in the conductor, program change are sent too, very very usefull while using 4 hardware machine like me. Your patch is perfect to...

noise2sine

Thanks but i couldn't make it work properly . I'm using the 5.80.06 version.

The patch is open but i can't randomize note above C0 ? No randomization possible in C1 and over ?

Do you think it's possbile to have random action within 4 bars ?

noise2sine

Perfect ! Really thank you !

noise2sine

Yes you are right the second solution is better because more flexible . And you are right too about patience, but do you really think Hollyhock will be out one day ? (joke

)

thanks again

noise2sine

Thank you for the new version, i get it more :) . The patch is close to be perfect to me .... what i have done is : for example snap 1 is 4 bars long, so i have writen 4 times 1 in the list box . Do you think it would be possible to have two list boxes like : Snap numbers of bars 1 4 2 2 3 24 4 3 an...

noise2sine

Hello Joffo78, Thanks a lot for your patch.Nevertheless i have few question : - We can enter bars numbers in the list box right ? but i couldn't find the relation between the list box values and the different snap shot in the conductor ? I didn't get for example how the snap 5 can go back to snap 1 ...

noise2sine

Hello, I'm using a lot the conductor and i was thinking if it would be possible if the scene of conductor could change automaticly according to a number of cycle (bars) ? For example the conductor scene 0 is played 8 bars then it move to scene 1 for 2 bars and so on ? That way it would be cool to pl...

noise2sine

Thank you for all these wonderful eggs !

noise2sine

yeah ! thank you to all for your help ! Perfect tool for composing now . Thanks again and happy Easter !

noise2sine

Hello, First , really thank you for your attention ! @noise2sine: I think i can patch it, would you prefer to randomize notes from a chosen scale or from a scale made from initial notes? (how many notes in general? more than one octave?) Actually both are quite interesting . it can be good to set a ...

noise2sine

Hello Nay,

Thank you for your starting patch, it's what i wanted, but as you said as it's not dynamic while changing the numbers of steps the notes name don't follow the steps numbers.Maybe someone else can help making this working dynamicly ? I presume you are really busy

noise2sine

Hello,

Any fresh news about this request ?

noise2sine

Hello, I was wondering if there 's a way to see to notes name inside each slider of the step sequencer ? or somewhere else ? The notes name are visible while moving the slider but i found difficult if i have to rearrange a pattern later . It would be nice to me to always have the note names visible....

noise2sine

Hello Percuson,

your patch is working perfectly now,very smooth and really well thought ! Perfect tool for me now.

Now the repetitions are clear and fluid

Thanks again !

noise2sine

Hey Percuson, i m looking foward to use that brand new patch you made !

noise2sine

I'm using the Metaphysical Function but i have inserted a tuner in the patch. Maybe it's the reason why i get those problems. I will try without it and let you know

Thanks

noise2sine

Hello Percuson,

Really thank you t for Pizmidi patch you made, really cool one . I think that now i can carry on my Midi delay frenzy adventure with ease .

Anyway if you manage to improve the Usine patch it will be a bonus !

Thanks again and have a nice a day !

noise2sine

Hello Nay, I'm using a Reaktor instrument with your patch and it's working fine : i can create and rename a preset in reaktor and then it appears in Usine list box . If i'm clicking on names in the Usine list box i can see the preset moving in Reaktor. The problem i'm facing now is that when i'm usi...

noise2sine

Hello Percuson,

Thanks a lot for trying and spending time on that. I will test your last patch today and let you know . I think it's a good challenge because there is no other plugin like that around

Thanks again

noise2sine

Hello Percuson, After testing a bit more the patch, i 'm facing some interogation.First of all,when the sync mode is on, the note length are not regular, so i can hear during the first bar the repetition quite well, but after that the repetition fade out, even with the feedback knob at 0 ? This happ...

noise2sine

Hello Percuson !

The patch is just perfect, it's really really useful to me ! That's exactly what i needed for making endless grooves ...

Thanks again

noise2sine

Hello,

I can't add the new values in the maper value module ! it get stuck to seven.how can i add more ? ( i have aplied poly without sucess)

cheers

noise2sine

Thank you Nay, working perfectly !

noise2sine

here's the VSTi i'm using :

http://www.sensomusic.com/forums/upload ... M_VSTi.rar

noise2sine

Hello Nay, Unfortunatly i couldn't make it work :( I have used yr patch but i had to delete yr vst plug in because i don't have it. So i have replaced it with a new vsti and created a new list box. I have right clicked on the vsti for renaming it and same for the list box. I can see the preset names...

noise2sine

Hello,

I wanted to know how i can make list box dynamic ? I'm using a vst instrument and my wish is that when i create or rename a preset with the VST instrument ,it would be autamoticly updated in the list box ?

Cheers

noise2sine

Yeah excellent work ! simple and very powerfull, making very nice groove using 21/8 time signature !

thanks again to share

noise2sine

Hello,

I'm sure many of you saw this show . Anyway good to see it again !

http://www.youtube.com/watch?v=DJHtcWLhrX4

noise2sine

Thank you Nay but i didn't manage to make it work with the patch i'm using :( . I'm using the one named OSC_3, the one with the resonance knob) . Would you mind sending me an example with this one ? Would it be possible to see the freq values changing while using the freq to midi note slider moving ...

noise2sine

Hello, I 'm using Nay Seven Osc, and i really find them great, so great that i have created a simple patch with 8 same oscillators in order to create chords. My question is : How can i have a knob with midi notes ? i mean being able to set the frequencies of the oscillators with midi notes ? Can i h...

noise2sine

Thanks a lot for your advice, i will try what you have proposed. Anyway i think it would be great to have a Usine module able to deal the calendar(year/month/day/ hour/minute/seconds/

.It can be great for programing scenarios for long time installation ...

thanks again

noise2sine

Hello 23fx23, I presume you are really busy, i just wanted to mention that your patch you have made is really great, and i didn't find other patch or plug doing this kind of thing. for now it needs to be improved and i suppose you are really busy. My only request would be to be able to use the rando...

noise2sine

thanks for that first idea, can the time module be set according a week ? i mean different time set for the week end ?

noise2sine

Hello,

Would it be possible with Usine to get sound from a webradio ? how ? how is it possible to set a starting and ending time for the broadcasting ?

Cheers

noise2sine

cool ! - first i was mentioning the compatibilty with XP ? it seem that it would work without any garanty right? - As i'm not intersted in multi touch possibilities, would it be interesting anyway ? - do we have to think in terms of "better" if we have to compare Usine and Hollyhock ? - Usine will s...

noise2sine

Personnaly, i am interested in buying Hollyhock, but before i would have liked to ask few questions first ?

noise2sine

what is platinium member ?

noise2sine

Hello,

At moment it is not possible to ask question on the Hollyhock thread, is it normal ?

Cheers

noise2sine

very kind of you! thanks again four your attention !

noise2sine

After some testing, i think it will be really cool that when you enter notes in the piano roll you can then randomize them but keeping the initial scale : B C# D E F# G# A B and after pressing the randomize note BUTTON we can have for example : G# E A F# B C# D D hard to do ?

noise2sine

At the moment i'm connecting a Midi transform module to the outinlet of your piano roll in order to rescale the note after pressing the randomize note button.it's working quite fine. The problem with the Midi transform module is that there are really few scale. But it can be an easy option. Randomiz...

noise2sine

Hello 23fx23,

Yes it's working really fine ! It's exacty what i needed .

Thanks again

noise2sine

Hello,

Would it be possible to have more scale in the Midi Transform module ?

Thank you

noise2sine

Bonjour,

J'avais suivi l’évolution de votre patch avec attention. Comment serait il possible d'utiliser votre subpatch module gerant vos gammes à la maniere du module MIDI TRANSFORM ?

Merci

noise2sine

Thank you so much ! i will have a go and let you know ! thanks again to share

noise2sine

Hello !

Anymore ideas about this patch request ? It would be an amzing xmas gift !

any suggestion would be great !

Cheers

noise2sine

Hello, After many turns,i'm still facing the same problem. I have uploaded a piano roll . the first midi file is the one recorded, and the second one is the first one saved and then imported . I don't understand why it's not the same ? http://www.sensomusic.com/forums/uploads.php?file=Test%20saving%...

noise2sine

Thank you for the answer, i will test those new values .

Thanks again

noise2sine

Sorry but i get lost, ican't find those values !

Can anyone help ??

cheers

noise2sine

Thank you nay, it's working fine

noise2sine

super ! je vais essayer

noise2sine

yes thank you, it's a far more friendly solution ! thank very much ! i have tested it , sometimes i can't select a scene ? if i'm choosing scene 6 it goes back 3 ?

Why ?

noise2sine

Hello Nay,

Here are the patches i wish to use. So my request is to be able to send to an audio bus a selected sampler . which is the best way for doing that ?

http://www.sensomusic.com/forums/upload ... %20aux.wkp

Cheers

noise2sine

Hello Nay , I have another question. In my patch i'm using 4 sampler using the same general output. My wish now is to create buses in order to isolate a sampler in order to route to an fx track. I have created two buses and used a stop event flow buton. it's working but i'm pressing on the stop butt...

noise2sine

ok i have tested again, it's working .

noise2sine

hi Nay,

Unfortunatly it's not working ...

noise2sine

Hello Nay,

when i'm using this patch i always have a +1 value . If i want to program change 26 and write 26 in the list, the program change that will be selected will be 27 . Where is the best place for using a x-1 module in the patch ?

cheers

noise2sine

working fine !!! thanks again !

noise2sine

Hello Nay,

i'm facing a problem with the sample selection now. i can't move the num file fader in order to select a sample in the list ?! it get stuck on 1 ...
Here is the download link, if you have time ...

http://www.sensomusic.com/forums/upload ... 0X%204.pat

noise2sine

sorry, yes that's what i needed ...

noise2sine

i didn't mean on the sampler ! i was talking more about a subpatch with a slider with left and right .
how can make that ?

noise2sine

Hello,

I would expect something more basic like the one for the main track ?

noise2sine

Hello,

I'm building a simple patch with 4 samplers. They all have the same output. i didn't find a Panoramic parameter on the sampler ? where can i find a solution for having 4 indepedent pan option ?

cheers

noise2sine

thank you Nay, it's working fine !

noise2sine

ah ok yes it's clear, and it's working perfectly. But if i need like 30 scene ? do i have to simply copy and past the list box and the buttons ?

noise2sine

well i do not understand where i have to write the program change number, and how they correspond with conductor number lines ?

noise2sine

Hello Nay,

I'm sorry but i need the patch you made concerning changing program change with the conductor, but i have no clue at all about how is working ! i have tested it long time ago ....

Thank you

noise2sine

Hello Nay,

I couldn't make the Triplet quatification working .... I think i didn't find where and how i should write the values you told me ? And i don't know about polyphony ....

Can you help ?

cheers

noise2sine

To : Protofuse

Do you think Max for Live would allow this ?

noise2sine

Hello protofuse, I think what you describe is what i'm doing at the moment in Live : - One midi track with Usine (the Usine workspace contains 2 piano roll, one set on channel 1 and the second one on channel 2) - another midi track which grab the midi flow from Usine . The problem is i can't set "mi...

noise2sine

I do , but i can't get the two different midi channel in Live ! How can i make that ?

Thanks

noise2sine

Hello, The second solution is working fine for me. But i was thinking about a way to have in the same workspace the possiblity to send midi output from two different piano roll ,and with Usine used as a VSTi in Ableton Live ? my wish is to record these two piano roll in two different track in Live. ...

noise2sine

Hello,

I'm using Usine as a VST in Ableton Live . The Usine patch consist of two tracks with a piano on each one . My wish is to be able to start the two piano roll in sync ? I mean one play button for the two ?

Or any other solution ?

cheers

noise2sine

working fine !!!

Thanks again

noise2sine

Thank you Nay , it's working fine . But if i'm using the random CC patch i couldn't find a way to do it ! Any advice ? Here is an example of where i'm now. http://www.sensomusic.com/forums/uploads.php?file=random%20cc%20control.pat The example is available in the uploader section ( the link doesn't ...

noise2sine

Hello,

I would like to give a name to a CC number and then being able to choose among a list different names. Which is the best way according to you to do that ?

noise2sine

Thank You Nay , it's working like a charm !

noise2sine

Hello,

I wanted to use a LFO module in order to modulate a MIDI CC knob, but i can't find where to plug the LFO module .

Can someone help ?

noise2sine

Hello,

Really great job, but really heavy !!! Is there any chance to have a lighter version ? it would be wonderful !

noise2sine

Bonsoir/jour tout le monde, très interessant cette idée d'arpegiateur! Si on rentre dans la polyrythmie, il serait peut-être possible d'envisager le rythme comme une division de la mesure (comme tu fais bien le rapport à la ronde à chaque fois) mais avec la possibilité de choisir des valeurs différ...

noise2sine

Bonjour, C'est avec grand intérêt que je suis l’évolution de ce projet . N’étant pas du tout un as du patching, je ne peux malheureusement pas être d'une grande utilité à ce niveau, par contre je peux faire des suggestions qui pourraient éventuellement être intéressantes . Lorsque tu dis " Est-ce ce...

noise2sine

Moi aussi

noise2sine

Hello,

I have tried the patch you told me without any success. Maybe i didn't express my needs correctly. I wanted triplet values like Tripet, 1/24/ ; 1/48 ?

Is the patch Tempo to Delay can help in any way ?

cheers

noise2sine

Hello,

Would it be possible to add some 3/4 , 6/8 divisions and so on ?

Thank you

noise2sine

thanks a lot

noise2sine

Hello,

I'm using the midi random Cc module, and i want to know how can i define a minimum and maximum CC values ?

Thank you

noise2sine

no , i was draging from windows explorer !

Working fine now !

Thanks a lot for your attention

noise2sine

here it is :

http://www.sensomusic.com/forums/upload ... age_ns.pat

noise2sine

Hello Multiphone,

the patch is in the uploader section ( don't know yet how to make a link)

noise2sine

Hello,

Still can't make it ! if i drag and drop an audio file to a sampler Usine ask me if i need a wave player for reading the file...

can't load anything even with 8 grains selected

noise2sine

Hello,

How can i load different samples in the different players ? I can delete the ones already loaded but it's impossible to load new ones.

i have tried "add file" from the list or drag and drop.

Thank You

noise2sine

Just amazing !!!!

With just a simple triad it's grooving so much !

I'm loving it !

Thank you

noise2sine

I'm using channel 1

noise2sine

Hello Nay,

I couldn't make yr patch working . there's no repetition at all. Do you think it's possible to create a midi delay like the ones for audio ?

Maybe it can be good to create this plugin with Usine special features ....

Anyone is interested about this idea ?

Help

noise2sine

thank you ! i will test it and let you know

But feel free to experiment if you have time

Welcome to %s forums

Search found 428 matches

Re: Long file in the Grid mode

Re: Converting CC value to DMX values

Re: Converting CC value to DMX values

Converting CC value to DMX values

Re: Long file in the Grid mode

Re: Long file in the Grid mode

Long file in the Grid mode

Re: Piloting a rotating engine with Hollyhock

Piloting a rotating engine with Hollyhock

Ryoji Ikeda style workspace

Re: Tuner module in Hollyhock

Re: Synch adjustment

Tuner module in Hollyhock

Synch adjustment

Re: Renaming a preset

Re: Novation Launch Pad Mini

Renaming a preset

Novation Launch Pad Mini

Re: Starting from the begining of the loop

Starting from the begining of the loop

Re: Hollyhock4 as Slave

Hollyhock4 as Slave

Playing a video file backward

Re: Export video

Re: Export video

Login • Register