Welcome to %s forums

Vincent

Hellowwww,

Ce soir, je demande à chatGPT de me traduire un texte contenant le mot "Usine" (avec majuscule).
Bonne nouvelle: il me traduit "Usine" par "Hollyhock".

Étonning, not?

Vincent

Hi my friends,

Sorry for the delay: I did not recieve any alert... maybe a small bug in the forum...

Thanks anyway for your answers.
And yes of course, I understand now it has to be handled by the Process procedure!

Have a good day.

V

Vincent

Hi! In a script, I'm wondering how to send a trig signal to a trig output: // trigger output TrigNext := CreateParam('trig next',ptButton,pioOutput); I suppose I should insert something like a "doevents" between "TrigNext.asInteger(1);" and "TrigNext.asInteger(0);", but I don't know how to code that...

Vincent

Hello, tous. Victime dâ€™un projet immobilier la maison de Pierre Henry, disparu le 5 juillet 2017, est dÃ©sormais en sursis. Cette maison unique en son genre fait partie de notre patrimoine, de lâ€™histoire de la musique, de lâ€™histoire de lâ€™art, et de lâ€™histoire de la dignitÃ© humaine. Cela n...

Vincent

Thanks Yan, I finally had the idea to open the trace window and see there was no activity...
I've fix the pb this night... it was just a power micro-failure!....
Everything is OK now, and it works very well.

Vincent

Hi, I'm traying to make this work... It's there . I've set all the prameters of the card and in Usine's setup, but I still cannot receive any data. (cables OK, Leds showing stream, etc.) I'm miss something, but what? I've created a new OSC In device but I cannot drop it in the rack input. ??? I've d...

Vincent

You can also drag-select the module and the wire (shift+click+drag), then CTRL+Clic on the module to unselect it. While the wire remains selected, you can just press Del on your keyboard.
Remember you can also multi-select wires by dragging the dots.

Vincent

Yes, it is the simplest way. But sometimes it's necessary to do some stuffs in the subpatch just before disable it (like mute audio to prevent from looping the last audio block). That's the reason why I also use this module Patch on/off connected to an 'on' inlet or to a switch with two links: one d...

Vincent

When you connect a switch to the enabled inlet, you can turn this 'off' and disable the patch. And when it's off, you cannot turn it 'on' anymore (because the patch is disbled!). The module Patch On/Off works differently.
It's confusing...

Vincent

Hi, I'm wondering about the "enabled" inlet of this module. It corresponds to the enable switch in the toolbar header and it's fine to have access to it. But what is the real difference between a non enabled patch and a patch with a "patch On/Off" module set to off (specially regarding CPU load and ...

Vincent

So you have the 'engine' in the additional workspace and the 'cockpit' in the main wkp. And you change the cockpit each time you start a new song, but keep the engine running, right? That seems a good solution if you always need the same MIDI/audio devices, FX, VST... Maybe you put them in different...

Vincent

Hi la tenaille, Yes, usinig is a good way to break oneself of habits!!! Well, it seems you have build a two-legged workspace! :) I also use arrays to minimize the number of links and busses, I don't know if it's a good idea, but it's clear and clean. About the popup windows, do you use floating wind...

Vincent

Hi Nay, thanks for your answer. So we are waiting for 3D-curves drawing, with the leap motion...
cheers

Vincent

Hi, I use a lot this draw trajectory module. But there is one thing I don't understand about the "coords out" outlet (not explained in the wiki). Why is this a three-dimention array? I understand there is the X-dimention and the Y-dimention of each point of the drawn curve... but what else? Is this ...

Vincent

Hi you both, I've also tried two or three things with the additional workspace. Since the two workspaces run the same instance of usine (same instance of audio engine), loading wkp sometimes cracks or dop out the sound. And I'm not sure which wkp is saved when I make a Ctrl+S. And, as you say, I can...

Vincent

Hi,
Yes, it's a Windows app, using Windows stuffs for colors. I'll upload it tonight if possible.
You could bring your color set file on a PC, change the layouts and copy it back on your Mac. Not easy...

Regards.
------------------------
EDIT - uploaded : HH Palette-manager

Vincent

Hi you both,
Thanks for your answers. More clear for me now and... waiting for HH2!!!
Kind regards,
V

Vincent

Hi, This procedure (SET_TARGET_PATCH) rises some questions. The manual says: "Define the target patch which will receive Internal Messages". 1. What happens exactly if more than one patch (or more generally, subpatch) has the same name in the workspace? subsequent question: is it possible to give to...

Vincent

Is there a way to have the VST send midi CCs based on the fader setting? Maybe from the MIDI outlet? If not, you can connect a Midi>Send Midi Message and a HasChanged module to the fader outlet? VB3 is a VST for emulating the hammond B3 Oops, yes, sorry. That's why drawbars of course. It's out of t...

Vincent

[...] as all of my NI instruments resend their parameter values when they change patches..... but I stopped using VB3 in part because it did not. Very frustrating when running drawbars from within HH. You're right... What do you mean by using VB3? Are GRM Tools written in VB? Well, this does not he...

Vincent

Yes shawnb, sorry I've not been clear. I know this tip and I've tried it (very long time ago, indeed ;) ). The problem I would like to solve is that the outlets of the GRM plugins do not send the new values when the plugin's parameters are changed with the plugin's preset. I've been told there shoul...

Vincent

Hi shawnb, thanks for the answer. In fact, as said in my post, it's when the presets of the plugin (GRM Tool) are used that the outlets don't update to the new value. Hollyhock should be able to retrieve the new values when needed (E Favreau says that the function exists), but I don't know about it....

Vincent

Hi, I had e-mails with Emmanuel Favreau at GRM: when you use the presets of a GRM plugin, the new values of the parameters are not sent to the module's outlets. He answered that « Hollyhock is to ask the current parameter values when needed (the function exists) and not the plugin to send continuous...

Vincent

Hi, Since this is not a bug (ID#275), I expose the thread here, because I really would appreciate some help about the log file messages. I have this message in the log-file, and would like to know what it means. It's probably not a bug in Usine but in my patch. Here are the two lines: [17:54:34] Err...

Vincent

Hi,
Just wondering about how to save/load the setup... (hollyhock 1.00.233 => 236)
Thanks.
Vincent

Vincent

Hi,

It's all in the subject, and it's certainly very heavy... but... ?
listen to Lubat playing with Continuator
With one MIDI In and many MIDI Out, parameters inlets, sync switches... well just dreaming !!

cheers
V

Vincent

Ah-ah!
There IT is.
Sure it's the end of a world.
sure it's the beginning of ours.
We won't sleep, I promise.
Let's make it bang.

Vincent

Hi 23fx23 Thanks for your answer. UsineMsg is realy a strong stuff indeed. may need a lot of string manipulations; mixing IntegerToString and comma strings is sometimes tricky! But I love this. Some parts of my patches are build or destroyed, wired or unwired. It's really cool. All my 'time to time'...

Vincent

Hi killers, I've been looking for that in the forums, but... It seems to me that the UsineMsg module can send IML from insert patches (in or out) to any patch or subpatch in the tracks. Even when Audio engine and/or track is Off. That's really great. But I cannot manage anything from tracks to inser...

Vincent

Hi Olivier,

OK, I understand.
Thanks.
It'll be great to save/play multitrack samples!
Excellent.

Cheers

Vincent

Hi all, Those x4 (and more) samplers are really fun. My problem is that I sometimes need to save the files. It saves only tracks 1 and 2 (one stereo file) and I loose the other ones. Same with 'SaveRand'. Do I miss something? The other thing is that the file is 16 bit instead of 32. It seems OK but ...

Vincent

Hi Bsork, nice to see you!
It's a chance that I already know Olivier, because I would have make the mistake to think that you were the most crazy-looking of those two guys!

So, who's next?

cheers!

Vincent

OK, thanks guys, that gives me some space before fringe.
I won't make an eeepc cluster, since the whole "aparatus", including electricity production, should fit in a beehive. But I keep it in mind for another mission.
cheers.

Vincent

Hi all killers! I'm planning to be perhaps the first crazy guy to run Usine at 2700 m, with a windmill, to make music for marmots and eagles. This is the first step before an ESA/Army top secret program to run Usine on Pluton (with a cyanhydric acid mill) and to teach electronic music to micro-organ...

Vincent

http://www.sensomusic.com/download/examples/sscond.jpg If I know what "Conductor" means, this interface says to me: "when you recall snap 2, the cursor goes to marker 3", and not "when you go to marker 3, that will recall snap 2". Each parameter of the conductor is an action of the Conductor, yet, ...

Vincent

you can recall a snap-shot at a precise marker position. if you enter 1 in the marker field of the conductor, the snap-shot will be recalled each time the cursor reach the marker [1) on the time line. Hey, Conductor becomes snapshots? Does this mean that the Conductor is now "conducted" by the mark...

Vincent

1/ Having the possibility to fill the position patch (begin/end) by the keyboard Yes, that would be so fine. Important point. Some right click command that shows a "coodinates" box with start and end positions according to the ruler's unity (time/bar/smpte), avaiable for patches and for markers (.....

Vincent

Good question.
If anybody can answer to that, we'll be at least two to appreciate!

cheers

Vincent

martignasse wrote:you are in ideal position to make a 'User module tutorial for C++ newbie'

Not yet!
I'm still with C++ learning tutos and I positively understand nothing in all your threads about SDK and user modules.
In some words: i'm not as good as a newbie and it seems to me that i'm far to be!

Vincent

Markers in the sequencer are numbered and ordered according to the timeline. It coul be interesting to be able to rename them and, this way, changing their order. You could add markers between 1 and 2 without disturbing the whole project... And of course, to have the corresponding sequencer module w...

Vincent

Yes thanks!
I have an other suggestion: put the buttons on foreground.
Actually when there is a curve crossing one of them, you sometimes cannot click on it but select the curve.

Vincent

Thanks dr Martin,
I still have some hope that it will make me less idiot...
I'll have a look to these treasures.

Vincent

@ La Tenaille As we sometimes say in french: "Thousands of good things for both of you". Hope everything will be absolutely OK. @ lucenay71 I can't help you for the m-audio firewire 410 issue, but I 'lm surprised you had to used Asio4All. I can say two or three things about Absynth4 I use in sequenc...

Vincent

martignasse wrote:Quick answer :
Apprenez à programmer en C !
Apprenez à programmer en C++ !

they are french tutorials from 'le site du zero' so, especially for 'newbleubite' .
Hope it help

Yes! Tremendously.
Nice tutos, clears and realy well thought.
I don't specialy like Bible, but actually...

Vincent

Me too! I've not planned to build by myself any alternaltive solution.
And I don't want Olivier to suppress it...

Vincent

Hello La Tenaille,

Well, I just say... wow!
It seems big!
Separating view and data like you did, sure it's quite new in Usine.
Bye-bye conductor...

Cheers

Vincent

but I am getting more on more sceptical of my own scepticism These are ways of scepticism... Then, one close day, you'll discover that to be realy sceptic, you had to beleive at least in one doubtful thing: that you have to be sceptic. Because the V5 of Usine is on the road... and V6 in pieces in O...

Vincent

Ok La Tenaille, I re-read the thread from the beginning! There were two questions: 1) be able to move a whole patch without loosing the tenth of adjustments you made and you stored in the conductor. 2) be able to replace faders by knobs and so on without loosing the tenth of scenes you stored. For t...

Vincent

Hi La Tenaille In fact, I want the PM number to be stored with the conductor. So, why to drop it in a subpatch? Do you think the PM storing its own preset fader is a problem ? I don't think so. It's just an unnecessary redundancy. I don't see any situation where it can be a problem. I've tried the s...

Vincent

Hello La Tenaille, As you can see, no PM controls in my parent patch, and the conductor stores the PM preset number... weird ? I think it's because the preset number appears in the Interface Builder. The conductor must store the 'preset' fader value. Right-click on it and choose "Not stored in condu...

Vincent

Hello La Tenaille Yes, I've noticed you are an artist! The thing I don't understand is why is it stored in the conductor, as the fader is in the sub-patch and not in the parent patch ? I'm not sure I exactly see your patch. Just for confirmation, you have a patch X with controls visibles in the inte...

Vincent

Hi Latenaille! When you say «superficial knobs», does it mean «knobs in the parent patch»? Your question is not an easy one and can be answered in different ways according you want to do. First, all the controls values in the parent patch will be stored in the conductor's scene. So if you have there...

Vincent

... and for clear patching, you can also put the 2 'pass if chge' IN the subpatch, if connected to data in/outlets, they work the same (in and out values are marked in red in the patch interface, meaning 'only if change').

Vincent

nay-seven wrote:maybe a good start could be to open for example the "demo 08 sequencer ( slaps ) in Live mode to see how the sequencer can help you , then check also the world of the markers in the sequencer...

...and combine conductor scenes with marker-jumps patching!

Vincent

Yes, yes, very good Antwan! +1 for all More about the loading window, it also sometimes hides other important VST loading windows (Altiverb, GVI...) so: since it can be usefull to have it anyway, would it be possible to implement it in the trace window (just like the quantize warning)? The start-spl...

Vincent

+1!
I regret not to be born already speaking C++, that could be a very useful simple user module...
I'll check it anyway, your concept could be better than mine!

Vincent

senso wrote:I didn't anticipate the success of the IML!

Of course.
I must say it's much more easyer for me to add some bitmaps and draw some wires. Perhaps am I not alone in this simple case!

Vincent

Excuse me, lalo, but what means 'stiched'?
I'm actually working on some layout collections and I'm maybe missing something!

Vincent

Hope I'm not hijacking your thread Vincent, but I have a related question to Olivier: No Bjorn, you're not hijacking. Questions on IMI are important, since they proove to who needs that this feature will become one of the greatest mana in this game. Mana AND quad damage! I think that Olivier will a...

Vincent

Thanks Olivier,

Yes, scripts, sure, but it's not the same domain.
I'm thinking to something, here: to the possibility of mixing TXT templates with small C++ dll.
Those TXT files used by the template engine should be able to call an external procedure with parameters. Would'nt it be fine?

cheers

Vincent

Yes it helps! Anything helps where I am. Well, let's have a drink...
Thanks Martin.
I'll come back later.

Vincent

Bouh... C++ give me headaches. I understand absolutely nothing, it seems *very* different from VB that I now know a little... Architecture is different, concepts are different, ways of conception and ways to build... I'm just lost. And the MSDN in this release is so poor! 2/3 help files are missing....

Vincent

Hi everybody, @Latenaille: hum... how to clear buffer in VST delay? well, well, welll... That's a good question! @Sylvain: since your config seems to be exclusively for voice you could also put all your EQ, compressor and gate directly in the in master section: a) that save a track and b) since mast...

Vincent

Hi guys, just a small precision: on the delay module, you have a 'clear' button. Since delay keeps audio flow in memory (and delays it!), when you deactivate the patch, the delay module keeps the stream in memory, waiting to be reactivated and then... burp! that old stuff goes out. so, before deacti...

Vincent

Thanks, Martin.
Yes, I think I'll be able to have some good time!
Anyway, I won't make modules just as a game, I think that when I'll have do what I need, I'll comme back to Usine.

cheers

Vincent

Evrything works fine now. Thanks Yan for the right link. I had a look in the user modules. Looks simple, but unfortunately for me, all what I know in coding is in Visual Basic (VB 2008 is nice!). With Visual C++, I have to spend some time to re-learn... And time, you know... Yeah, I'll take it, ever...

Vincent

martignasse wrote:let us know your 'not coder' feeling about it

'Not coder', exactly. I'll talk, don't worry!

Vincent

Hello Yan,

Thanks for the link. Google doesn't like me and makes some jokes I don't appreciate!
I had to know that there was a 2008 edition and ask for it...
Now, let's go!

cheers

Vincent

Hi, Question: is it possible to do stuffs like this: CREATE_LINK SRC_MODULE SRC_TERMNUM+1 out1 2 // where 1 is added to the variable SRC_TERMNUM (this line doesn't work) Could be fine for stereo connections or for multi-module insertion. And is it possible to add conditions, etc...? And, in ...

Vincent

OK!!!!
Not strange at all!
I don't know how I did this, but I run a Visual C++ 2005!
Tell me pleazzze: where did you dwnload this C++ 2008?!
Thanks and sorry for this stupid post!
I'm impatient to start!

cheers

Vincent

Hello Martin,

I've donwloaded and unpacked this SDK V2, and I'm very desappointed 'cause I cann't open any solution with my version of Visual C++ Express (the free one )!

cheers

Vincent

up... :
Question: is it possible to do stuffs like this:

Code: Select all

CREATE_LINK SRC_MODULE SRC_TERMNUM+1 out1 2
// where 1 is added to the variable SRC_TERMNUM &#40;this line doesn't work&#41;

Could be fine for stereo connections or for multi-module insertion.
Thanks

Vincent

I look at that and say to myself: that's exactly what I was thniking about!
And then: Yes, I was thinking about that, but I was'nt able to formulate that thouht in any way!
And then: there it is.
Great job!
Since the beginning I say that Usine is a historical fortune.

cheers

Vincent

Thanks Olivier.
It's still present on the beta6 I dowloaded yesterday.
But it's a good and fast and reliable release!

rgds

Vincent

is the template creating a patch from scratch or is it adding the sub-patch and possibly other modules to an existing patch (as in "add group")? Hi Bjorn! In my first attempt, I used one of my patches as template. Then, I tryed to use an ADD GROUP. And then, I had so many questions that I gave up! ...

Vincent

Maybe it is possible.... I don't know. The template engine is quite a new stuff and I think it's good to have a look at it, because there you can see future Usine's releases coming! But I'm just composer and musician. I hate spending nights on programming, and I am not crazy about patching; I just d...

Vincent

Hi Martin,
I don't undesrtand what you mean!
To save files, anyway, you need a saving procedure, and I did not find it... maybe in next releases.
Can you make user modules with procedures like that?
Don't tell me. I should not have a look to SDK stuffs. No time for that.

Vincent

And interested in you're try with the sampler -> drooped files (can you explain a little please, is it to save and name files automatically ?)... Not such a tricky stuff! As a matter of fact, all my midi patches send midi flow via busses to other patches, but with some changes before, allowing sequ...

Vincent

Thanks.

Vincent

senso wrote:since the beta 6 you don't have to restart Usine. Changes are automatically reflected

Good!

senso wrote:If you have time it's a perfect job for the wiki?

For the help file. We need help!

Vincent

Hi, I've been doing some things in the template folder, and crated a few new ones. The first thing I would say is that it opens new and wide possibilities! It's true that for the first hours, help is hairy. But I know that manuals are great job and need time to come. I was missing procedures for Usi...

Vincent

woodslanding wrote:do you have instructions for setting up the script editor?

I have the same question with NPP. It seems it's a wrong one. I'll try it.
What language to choose? Pascal?

rgds

Vincent

+1 for amiga909. He is absolutely right and watch to things just as they are. The question is not: "free or restricted add-ons" but perhaps: "professional (and maybe restricted?) stuffs". "generosity" is maybe the right way for tomorrow, OK. But a professional tool is supposed to be nothing else tha...

Vincent

Hi again, Moody

Same here, whith quite a different configuration. What I can say is that it happens when patching. I did not noticed this pb when playing, maybe it happens, but since I dont always look at my screen at that moment, I cannot be sure.
30 seconds would be a big gap!

Vincent

Another suggestions : array to bitmap ? hi moody33, For this, assuming your bitmaps are all the same size, you can manage with a fader. Just make a bigger bitmap file with all your pictures in line *or* in column. When you affect this bitmap to a fader, don't forget to set the right number of frame...

Vincent

Hm, my configuration, sure. More probably my patch.
That's just a detail. I was wondering how it worked.
Ok, thanks.

Vincent

Hi,

Here is a screenshot of My Usine:

Does it look like yours?
Let's keep it for the next manual!

cheers

Vincent

Hi, I like the surround panner. It's quite a funny tool. But it seems that I hear a tiny delay between L/R and sL/sR. Since it is for multiphony, it has maybe no real importance, but I'm wondering if I'm using it correctly. Basically, I use it in combination with LFO or curves on F/B Pan (Y axis), s...

Vincent

Yes, thanks Olivier, I should have specify that's actually the first thing I did! I've tryied the whole range of buffering w/wo fast disk access (and restart Usine many times) with absolutely no noticeable difference. I add that there is no fragmentation on my drives and no other disk access request...

Vincent

Hello, I have now about thirty stems (audio tracks, on disk) along the time line in the sequencer and now, all of them make a big click when the cursor reaches their beginnig, despite of a long fade in. There were absolutely no click until about 20/25 stems. I inserted silence at the beginning of th...

Vincent

slydeparis wrote:So my reply was bad, erase it please....

No problem, Sylvain!
I'm not good in the analogic world, so, when I can learn too, why not!
The analogic approch is not appropriate for softs like Usine. It's not an emulation but a pure digital concept.
Thanks anyway.

cheers

Vincent

Thanks slydeparis, but I dont think your answer is helping me on Usine's busses. Anyxay, I'll try to remember what you explain me about microphones! The example I gave with Midi Busses works fine with audio/data busses. You can have as many SendToAudio bussses and a single GetFromAudio bus, and I us...

Vincent

Olivier explained [there] that busses could add a little latency depending on the track order. Okay, thanks Olivier. But I'm still wondering how busses exactly work: As you all know, this works fine: http://vincentmichel.eu/Temp0.jpg ...but did you try this? (busses are in the same patch here for mo...

Vincent

Okay, thanks Olivier. One cycle latency won't kill me. But since this works fine: http://img408.imageshack.us/img408/8181/temp0cx3.th.jpg this does not: http://img381.imageshack.us/img381/9451/temp1td3.th.jpg So I think that the busses sometimes don't work exactly like wires and I would like to know...

Vincent

Not such a strange choice, I understand. I was just getting confused with the words "Audio Engine Off". In fact, Usine is never Off and you can't turn it off. Tracks are just totally disabled. Master section can also be used to patch heavy VST or VSTi that are always used, whatever wkp you load, mak...

Vincent

Hi all, Since can drive Usine to it's limits regardless to the system ones, I'm facing some strange questions: - What exactly means Audio engine OFF (ex. the Master section is still ON when Audio is OFF)? Are there two audio engines(!)? Or is it still ON but disconnect from the Tracks in/out? Or is ...

Vincent

Hi, You're right, Wodslanding, shortcuts are somewhat confusing (and keystroke+clicks too). When you patch modular stuffs in Usine, then in Reaktor, then back in Usine, then... you just turn crazy! I would also add the very popular ctrl+C, ctrl+X and Ctrl+V (copy, cut, paste) that don't work the sam...

Vincent

Hi, I shut down Usine one hour ago with this big wkp saved before, and worked on an other computer. Now, I just restart (autoload ON) and what do I see there? An empty one, except of course the master section, with the name of my big one. Hey, what's wrong now? OK, I don't close Usine, since it's al...

Vincent

Yes, yes, yes!!! That was just some confusion with the concept of the Master Output (and I suppose the Input too) and some strange patching I did. The 'Add Audio' works perfectly logically!!! Usine Manual says: "If the patch is empty, it does nothing (audio thru)" and I stood with this. But the fact...

Vincent

Hi, The audio track mixer allows to route audio flow to any audio out in the master section (for master FX). There is the same list of audio out choices in the 'Add Out' module, but there, the audio flow goes directly to the master output (that is: after any patching in the master section). It does ...

Vincent

woodslanding wrote:[after three failed attempts to read the anti-spam code]
I SWEAR I know my letters and numbers..... they're not different in french, are they??

Maybe your pronounciation?
Tip: before entering the antispam code, I do a CTR+C on my post. We never know!

Vincent

Stefan wrote:the GetBus-Module could have a combobox listing all the internal data busses for the interface builder

+1!
And a fature that lists all busses used in the WKP in a window or a context menu, allowing "find in patch"!

Vincent

Before Usine 4.xx the default option was "plays wave in ram" (memories option). Hi Franck (and friends), I use 3.66 and default is set to "file", I understand that means "read on disk"? Olivier, audio patches in the sequencer are generaly bigger than the waves in the sampler. It seems that DTD woul...

Vincent

senso wrote:I'll think about this pb and try to find a better solution for the cpu load detection.

OK, thanks Olivier!
For now, I just can manage to run my stuff below 40% actual CPU load. At least good for the machine!
Cheers!

Vincent

Hi all, 2 Audio cards + 2 CPU + 2 instances of Usine. One insance on each CPU and on each audio card. Instance A is master since instance B is slave with remote (for dashboard, sync and main level controls) and a couple of Maple Midi Ports for VSTs and VSTis. There is also SPDIF cables between the t...

Vincent

amiga909 wrote:I just wonder if it is possible to somehow preload other workspaces, so you can make smooth transitions

I'm affraid not. But since Usiners make bigger and bigger WKP, I bet that Olivier will think about it.

Vincent

I'm using the sequencer on every workspace, and it's loaded with many long wavs files, so I think they are the cause for the long loading time... Same for me. My solution is to put all together in the same big WKP. Very long to load first, but then it's OK. And I can change the order whenever I lik...

Vincent

still scared, can't imagine such a trouble the day of a performance! The other troubles are hazardous, will probably be back one day. Thats software!! Just kidding... Olivier sometimes needs to test our patches. Just send it to him. His patching is almost always more clean and efficient than ours! ...

Vincent

And no chance of NI fixing anything (or even responding in the forums) until the next major revision, which will cost you several hundred dollars on top of your many hundreds of dollar investment That's true, woodslanding. An also certainly true with Reaktor 4 bugs, since I didn't use it for a long...

Vincent

You're right! I use 3.66 and I did some beta test on 4 (and on other realses) before it's out. I feel I have to do it, what else could I do? I could also seriuosly update the Quick Start, for a release I don't realy know and I can't use. That's OK, you know. But there is something else: I am a music...

Vincent

Hello Sylvain,

The key (from keyboard) and buttons (on controllers) may have a different behaviour.
On what control is this? What is it supposed to do?

Vincent

I'm like you I'm still using reaktor 4.0... No bugs in Reaktor 4.0. No bugs in Reaktor 5.0. And AFAIK Reaktor 4 ensembles work fine in Reaktor 5. You're still using Reaktor 4 because you don't deadly need Reaktor 5! But we need Usine, Olivier, we really deadly need it as much as you. And much, much...

Vincent

1. I've dedicated a track to midi only, without any audio in and out in my patches, but I still have an audio in... The same here! But it does not seem to have any consequence... I just don't care... Do we build the same buggy patches? 2. Sometimes the MIDI out don't work when I open the session, a...

Vincent

I also think that Usine SOUNDS better than my old system of Plogue Bidule and Reaktor.... maybe it's my imagination. So we imagine all the same... The sound is indeed much more interseting in Usine than in any other VSTi host. Even Reaktor's sound is greater in Usine, I just love it. But maybe it's...

Vincent

Hi, The button's behaviour described by Benjamin (1 when pressed, 0 when released) is a "Gate". In Reaktor, you have three different behaviours: Trigger, Gate, and Switch, all on the same module (options in a list). It would be OK to have three different modules in Usine, but it's true that it would...

Vincent

++1 for martignasse

Vincent

Hello all! Here is an interesting thread: http://www.sensomusic.com/forums/viewtopic.php?pid=5471#p5462 It appears that, despite to some efforts we do, help files is not always quite enough... And the Quick Start is absolutely and defnitely out of date. Senso is very quick, I'm very slow... what a k...

Vincent

don't forget that sensomusic is not Ableton sensomusic don't have 2 or 3 guys only for the helpfile.... sensomusic is only 1 guy ! That's true, Yan, but I think that, about the doc, komuso is absolutly right too. He woke me up. Thanks to Komuso... So, after the great V4 is out, I'll take time to up...

Vincent

komuso wrote:I figured it out..finally.

I knew it!

Vincent

hi again, komuso, About the doc... you're right, it's out of date. I did some stufs there more than one year ago and nothing since that date. I have no time for this and the matter is to keep up with Senso and Usine's evolving! Sorry I really have NO time now. But my track mixer our does not show an...

Vincent

Hi komuso, You're right, you have to insert 'midi out' modules to see the out selectors in the track panel. But, if there is no midi out in a track, why to be able to select any midi device there? Modularity has it's own necessity. So, my suggestion would be this: In the patches where you have 'midi...

Vincent

Sorry ! I was thinking that it was a french project. this project is genious ... @+ You're right, it's a french project. But since it's for (almost) any musican on this earth, so, well, french is not quite the right langage for this! And yes, you're right, it's genious. But don't say that to Senso,...

Vincent

Hello, I'm not sure I exactly understand the pb. Let's check: - First, choose your MIDI out preferences in the setup (and remember what device to which midi out # - just a number, it's not mapped to devices names). - Then, in a patch, put a 'MidiOut' module. It works OK for more than one. - Then, in...

Vincent

Hi Opositivo, I have a TC.Helicon too and I don't replace it with Usine. Toooooo gooood (but Usine is toooo goood toooo!). No VST will do right the same. You have TC.Helicon, you use it. I mean: preamp + pitch-adjuster + compressor + gate + voices + de-esser + and so on, in a good way, without eatin...

Vincent

bsork wrote:Disappointingly, Google suggests "Earth" or "Terre" if you prefer.

I'm not disappointed but happy. "Earth" or "Terre", it's the same little thing. And it's fine to be able to share about Usine (or other things) - with some english words.
Rgds.

Vincent

Salut, regarde, il me semble que j'arrive à écrire en Français sans me dématérialiser....donc, comme j ai ce soucis aussi (si être Français en est un !)... Hi friend. Not positively 'un-materialised', all right! But with some mistakes, just like us with our english. Do you mind if we answer to you ...

Vincent

Here you are, my friend! Our english is sometimes so uggly that it can almost look like some kind of french (or some kind of italian, or some kind of sweedish...). No kidding... Usine is not yet like Reaktor - but main Reaktor's forum is in english. One day, maybe, when we'll be thousands of francop...

Vincent

Thanks Clearscreen, it seems to be exactly what I need, at least.
I'll tell you as sson as I'm on my daw.
I don't really care about very short latencies, since this routing I think about is for surronding reverbs and delay FX...

Vincent

Thanks guys! With Jack, I did not manage to connect directly to the sound card. Surely somthing I miss. But yes, very low latency, almost nothnig, i think. It's tricky, but good stuff. @Clearscreen - Thaks for the links. I'll check that tomorrow - I mean today. But with binary files... I'm supposed ...

Vincent

JackDMP is not so easy to install and start... but it works OK. It's just like any sound card: if you select it in Usine's ASIO devices setup, you'll see Usines In and Out in the Jack Router. Then, it's very easy to connect Usine A to Usine B *and* vice-versa. So, yes, I can make my two instances of...

Vincent

Hi ethnix73, The PM stores the values of the controls in the same patch. For sub-patches, I would suggest 2 solutions: - connect controls to the inlets of the sub-patch - and their values will be stored in the PM - add a PM in the sub-patch and make it work in parallel with (or chain it fully to) th...

Vincent

noise2sine wrote:i'm waiting for the 4.0 version

Don't feel so alone, my friend! We all are waiting in the cold and rainy and windy night!

Vincent

Also, Wormhole2 works on Windows as well as Mac Good news. Thanks gregh and thanks to Clearscreen fpr your comments. Hyperspace travel for your audio This project needs a new leader. If you are interested, please let us know: plasq.com/contact Wormhole2 is dependent on Steinberg's VSTSDK, which is ...

Vincent

I gave up with OSC. Not the good solution. As says Olivier: much too "fragile"...
And, well, I find no solution for my stuff. I must stay with only half of my power for a while.
Maybe if it's not too crazy to implement, it's already in Olivier's TDL! We never know!

Vincent

VST bridge Senderella does not work in Usine neither in Cubase, neither for any combination of these two softs. Except for a big horn sound. I surely miss something, since it was supposed to be very easy to use... I'll now see what tobybear, realplug and vertex say - thanks amiga909! EDIT: the only ...

Vincent

OSC and audio is fragile with a respectable latency! Very! And am I wrong or it's a little greedy? Thanks for Subminimal Senderella!, I'll try this tonight (Subminimal site is down for a while, it seems...). This plug seems to be simple. I'll tel you. And thanks guys for your links. Open source is ...

Vincent

Hi Bjørn, Thanks for your answer, master guru! And almost good news: It works nicely for any kind of data (bye-bye Maple Midi!), except for audio (with 'type' set to array). There is a very sensible quality loss, and many clicks. Chnl 1 of Usine A sending audio (16bits stereo) to Chnl 1 of Usine B =...

Vincent

Yes, Bsork, my complicated stuff used MOD modules. But, finally, I decided to have never more than 8 presets. Much more simpler, and certainly more convenient in the sequencer than in grid mode. In the sequencer, I can have 8 presets in a patch, then again 8 presets in a copy of that patch (but furt...

Vincent

Aaaaaahhhhhhh! Sorry, bsork, I have to try that now. Thanks!
See you later!

Vincent

Hello! Two instances of Usine standalone work so well (when installed in different folders of course). One instance on each CPU. And also each instance has it's own audio card. That kills. They can communicate MIDI with Maple MIDI Tool, and they do it perfect! But, unfortunately, since Virtual Audio...

Vincent

I've changed the fader to "0 to 23" and looking for a way to dispatch the signal that way: 0 to 7 to PM 1 8 to 15 to PM 2 16 to 23 to PM 3 Hello La Tenaille, I've also tryed some stuff to do that, and it seems very heavy, so I'm just like you: waiting for the answer of master guru Bsork! Remember, ...

Vincent

Great thanks bsok!
I'll srr that with much interest!

Vincent

Yeah!
I like it!
Nice fonts. Clear and clean.
Beautifull css!
So I'll have to change my stupid avatar...

Vincent

Of course, that was the good question. Thanks, Olivier.
Answer of VAC itself: "VAC has a Windows virtual WDM/KS device driver"
So, have you heard about any other kind of Virtual Audio Cable that has an ASIO driver?
Or, and this should be asked in the 'suggestion forums', could Usine easily do that?

Vincent

Hi,

Did I miss something?
Virtual Audio Cable(s) dont appear in Usine's audio setup, since they appear (and work) in the setup of all my other apps.
Tanks for advices!

Vincent

Hi all, Not three windows, I agree, since we can use Interface or local interface builders if we need to have somme more screens when in sequencer or live mode. It's true that in sequencer, it would be cool to have access to all inouts. But talking about windows, thr thing that misses me a lot would...

Vincent

Hello Mgr La Tenaille, If it's not an empty tracks, first delete the patches. Just save your workspace, then quit and restart Usine with your workspace. You'll then have only non-empty tracks. I know, it seems absurd. But deleting tracks, what for, indeed? When I see an empty track, I quickly find s...

Vincent

stanlea wrote:Not limited to Synthedit I think.

I meant: plugins done specially for Usine! (since no else soft can do half the same). Hot stuff in SE-plugins buiders heads.
Bet that other builders will follow soon...

Vincent

Unfortunately in french, but very exciting: http://nay-seven.com/detail.php?forumid=3&id=817&page=1 And screenshot: http://bserrano.free.fr/Usine-Modular.png In some words: SynthEdit developpers are thinking to DLLs that are parts of synths. Just assemble them in Usine to build your own machine, and...

Vincent

And you can also save your Master Section, and reload it after upgrade (it will then be loaded each time you start Usine).

Vincent

I can figure it.
Be sure not to be slave of it. I mean: be slave of nothing!
Cheers

Vincent

Thanks Olivier, take it easy!

Vincent

Hi eimhein

Only three days of july in Paris... Well, I don't know!
Just glance at what your're missing: http://www.nuit-bleue.com/nuit-bleue-2008/
Welcome in France, anyway.

Vincent

Hi Olivier. I'm talking about a window in which you could see all your audio/data/midi (I/O) busses listed, with their location (name of the parent patch and track#), their status and a "find in patch" button. Some kind of matrix would be a dream. Could be very usefull to retreave one's way in compl...

Vincent

Exactly what I'm looking for!
Do you mind if I use them for my "Dehors les Toiles" (outdoor exhibition) ?
Thanks Yan, nice of you!

Vincent

It seems to me that these are two different problems: a. having one or two customisable tabs to be able to browse directly in any preassign folder; b. a 'tag' or 'favorite' tab with let's say the top-twenty modules. And if I had to choose between a and b , I would personally prefer a , ie. benjamin'...

Vincent

Great!
I'll be there tonight!
Thanks, Olivier.

Vincent

Sorry, my post is already there: http://www.sensomusic.com/forums/viewtopic.php?id=873

Vincent

I don't like the anti-flood since my internet screen shows red as black. Hmmm what a world!

Vincent

Well, plaf, I don't use DX plugins and I did not know about DX --> VST wrappers, so maybe should I go out... But can you connect controls like faders or knobs to a DX --> VST module? If yes, you now know how to do a midi learn on them ;) I think it's generally more efficient not to use the plugins i...

Vincent

Do you know how to use Plug ins Waves with Usine ? Hello plaf, and welcome here! As Nay-Seven suggested, you can see that it was my question first! You'll find shell2vst there , and some french explanation there , it's my answer on AF. Note that this stuff will change your VST Shell into as many *....

Vincent

+1 for Moody33!
Thanks

Vincent

Reaktor has three-modes buttons (set in the parameters): - trigger ("bangs" 1 when clicked, i.e. only one event) - gate (sends 1 as long as pressed w/mouse or midi controller, 0 otherwise) - toggle (switch 0-1 each time clicked) Why to do differently? Thanks for the idea, moody33! And... could this ...

Vincent

Nice! I'll try this, since it seems easy for me!
@nix: why not send youre files with YouSendIt? It's free and quick (no commercial attitude).

Vincent

Thanks Olivier for your hard work!
It's one more step toward perfection!

Vincent

senso wrote:It will arrive very soon.

I love you!

check the file releaseNotes.txt

Yes, of course!
Thanks.

Vincent

Thanks Moody33!
I'll try it tonight.

Vincent

Fine! So I'll keep it

Vincent

senso wrote:some of us are lucky...

Sure.
Why should it always be the others guys?

Vincent

You know, those rock solid non-moving patches...
Will it be implemented in the 3.64 release?
Sorry, I'm just dreaming evry night about it...

BTW, what difference between UsinePro3.57.zip and UsineProStandAlone3.63c.zip?

Vincent

Youre "Tactique du Quotidien" is in my playlist for the "lost lucky place exhibition".
Do you mind?

Vincent

Hi Martignasse,

martignasse wrote:not yet some sound for you...

Incredible, i was near Savines du Lac last week.

out of topic: many nice places around Savines, Boscodon abbey, Pontis trees and rocs, Morgon peak... and of course, the lake.
Give me a PM when you come back, I have beech and larch to stack!

Vincent

grego mondo wrote:Where's your small and lost village

It's there.
Thanks for your offer, Grego Mondo.
I know your albums and I have some favorites. I'll tell you when I'll do my final choice.

Vincent

"small lost village"? Yes. small = half dozen of famillies (by winter time... but lot hundreds more by paragliding time) lost = far from everything except what I really need (wind, trees, montains, cold water, bees, birds, rocs and... full silence) I hereby give you permission to use whatever music...

Vincent

Hello crazy composers, I'm preparing an exposition/installation for this summer all around my small lost village, this is the second year. I would like to dress all this with some sounds called music, and give spirit for a strange day. Would you like to give me some links of your best works? Creativ...

Vincent

Thanks!

Vincent

Hi Madmage, I don't know asio4all, but maybe try to stop first the driver from Usine's setup panel, then tweak your asio4all config, then restart the driver in Usine's setup panel...?
Yes, I've noticed that it's sometimes usefull to restart Usine.

Vincent

Hi again, Thanks Olivier for your answers in the other threads. - An easy one: I was thinking to a small patch info button on the patch interface panel, like this: http://img301.imageshack.us/img301/2190/patchinfobuttonko3.th.jpg , for example. - Another idea was to suppress the last red point of th...

Vincent

Hi Olivier, There is already a 'Goto Marker'. But, since Markers# keep in timeline order, their numbers change as you insert new ones (or delete) before. Not the case with bars, neither time. So what about a 'GoTo Bar/Goto Time' module ? Useful for sequencer timelines counting something like 600 bar...

Vincent

Hi, I like this thread! It gives some wieght to the future midi power of Usine. ++++1 for the "graphical approach" suggested by Benjamin (and very nice "Il pleure sur mon coeur" too). A little heavy, but can face any situation; and quickly customisable with presets and/or setup. Or also have a separ...

Vincent

soundwave wrote:I hesitated, because my sound card, firewire m-audio solo has only 4 in/out...

I only have 2in and 6out, but I'm glad to have more then 4 tracks in my workspaces, specially in sequencer-live mode..

Vincent

senso wrote:Actually there is only a 'goto markers' module.
I can add in 'sequencer commands' module Markers info (time) and 'loop' state.

Yes, thanks!
The 'goto markers' module is nice.
A 'loop' state would be greatly helpfull.
Thanks, Olivier.

Vincent

That's it, Yan, the switch must be visible in the interface builder. You're right.
Except that I don't use it, since it's more disturbing than helpfull in live mode...
I'll find somthing else.

Vincent

Yes, for VST version of course...
But for standalone, it hides the task and you cannot make it visible any more (except writing a few code lines in Visual Basic or other...), when you forgot saving the workspace before! That was funny!

Vincent

Hi, How is it possible to toggle between 'Live Mode' and 'Sequencer Mode' with only one "MidiLearned" switch? I've tryed many patches and they all work the same way: - From Sequencer Mode to Live Mode, it works fine, but the switch stays ON (!) - From Live Mode to Sequencer Mode (even with the switc...

Vincent

One of the synchronisation modules (I dont remember which one) has a 'total bar position' outlet, which is very usefull.
Could it have a 'Marker position' outlet too?
And an 'is in loop mode' outlet?

Vincent

senso wrote:I think that the pb is solved.
Now there is no patch position modification when you change the tempo.

Great! Great...
Just for personal workflow organisation: will it be in the next release? When?
Thanks a lot!

EDIT: please?

Vincent

Vincent

Show Usine. It's in the title and in the global remote...
Did anyone try this funny joke?

Vincent

Yes, the 'Shell2Vst' application works nice. It's advantage against "deep scan" is that Usine starts OK. Deep scanning can be a little 'dangerous' depending on the VST you store in your folders. In the best case, it's very long; in the worst, it freezes startup... (thanks to the 'start-from-crash' b...

Vincent

Thanks!
Note that this 'all notes off' is logical, I'm OK with it and you should keep it. It is NOT a ghost.
But it is unnecessary - and very bothering - to send it as long as the synchronisation is of.
Only one cc123 should be fine?

Vincent

senso wrote:The 'seq midi' module is only maintained for backward compatibility. Use the Piano roll instead.
The CC123 is 'all not off'.

Thanks Olivier.
OK, but the 'Seq midi' automaticly comes up when a midi file is drop in the sequencer (UsineProStandAlone3.63c).

PS : Yes, I now well know what cc123 is!

Vincent

ok , i've test your way : insert a midifile in the sequencer , add a midi in module...no problem maybe check the midifile itself...? or try with an other midifile..? The same for all of them. I made them: there is no cc123 in the CC I use! I think it just comes when Sync is OFF, I'm working on that...

Vincent

sorry , i've replicate your patch with an other vsti , insert it in sequencer and no problem here... Thanks for help, Yan, why to be sorry? No Vista here for the moment, but XP pro. No matter I think. One difference is that I first inserted the patch in the sequencer, since it's a midi file, and th...

Vincent

bsork wrote:I've only just recently begun using the sequencer "for real"

I really like that.
Sequencer is really for real!

Vincent

Thanks Yan, "trace in" is active, and shows nothing!
Try just to put a 'Midi Filter' after the 'Midi Seq' and it shows that the cc123 sends non stop (red led "send" always lit)... with nothing before.
I always hated ghosts, specially #123!

Vincent

(for a midi newbie like me...) Ah-ah-ah! what are we if you're a newbie? Default patch (almost...) with upstream midi mixing: http://img368.imageshack.us/img368/3828/nouveau2pd1.th.jpg Downstream midi mixing: http://img388.imageshack.us/img388/6677/nouveau1nr0.th.jpg Since the 'seq midi' sends a cc...

Vincent

My always used one is not exactly a compressor, but a good maximiser with precise out ceiling, I plug it in the track master out: - Waves L2 Ultramaximizer +- 3% CPU. But not a cheap one... Easy to patch? There are two or three other, like - Waves Doubler +- 4% CPU - AudioEase Altiverb %CPU dependin...

Vincent

Nobody to help me? Is it a stupid question?

Vincent

Incredible! I can't wait to check that!

Welcome to %s forums

Search found 315 matches

Traduction du mot Usine en anglais

Re: How to trig in fastscript… ?

How to trig in fastscript… ?

Login • Register