Hello & a question

[kara]

Hello from a new member who is planning to buy Usine

Since I'm playing a Midi guitar I have a question

The problem with a midi guitar is that it doesn't send midi notes off , only midi on.
So in principle I would need a litle module that send a MIDI NOTE OFF message before sending the actual MIDI NOTE ON message. Is this possible in Usine ?

If this is possible I could insert this module on my 6 midi channels (each string sends on his proper midi channel) and my problem would be solved.

tia

k

[senso]

Hello,
Your problem can be solved very easily with Usine.

on a patch put the following modules:

- input output / Midi input (unpack option activated)
- input output / Midi output
- midi / Midi filter
- midi / create Midi message
- math / Variable
- Event Control/ Wait 1


1) connect [Midi Input](midi) ---> (in)[Midi Filter] to let pass only note ON msg
2) [Midi Filter](code1) ---> (in)[Variable]
3) [Midi Filter](send) --->(in)[Wait 1]
4) [Wait 1](out) ---> (affect)[Variable]
5) [Variable](out) ---> (code1)[Create Midi] and set the (msg) to "NOTE OFF"
6) [Midi Filter](send) ---> (create)[Create Midi]
7) [Midi Filter](out) ---> (midi)[Midi Out]
[Create Midi](out) ---> (midi)[Midi Out]

save this patch as "filter one channel.pat"

now take a blank patch and add 6 "filter one channel" as sub patch (with Ctrl pressed in the browser)
In each sub patches change the 'channel filter' of the [midi filter] to filter respectively channel 1, 2, ...6.

Thats all...

Take a little time to understand how it works. Usine is rarely more complex than this example.

Hope it will help

[kara]

Thanks for your answer Senso, I will try this

cool,
k