Strugling with a bar counter

kara · Unread post by **kara** » 24 Feb 2010, 15:02

I need a bar counter to know where I am in my song (in grid or IB mode)

I've managed to build a bar counter :

Clockbeat module -> +1 module with out back to A -> /4 -> int to string -> text

which works

My problem is that when I stop and restart the audio engine (with SPACE) my counter should reinitialize to 1

Is there a solution for this ?

tia

k

nay-seven · Unread post by **nay-seven** » 24 Feb 2010, 15:40

don't have try but i suppose you can use the dashboard module and use the outlet "on" with a 0to1 module...to send a 1 of a pass module ..

kara · Unread post by **kara** » 24 Feb 2010, 16:03

hmm the dashboard module hasn't a outlet 'on' ?

nay-seven · Unread post by **nay-seven** » 24 Feb 2010, 16:13

sure..?
of course it could be named " off" if you audio engine is off..

gurulogic · Unread post by **gurulogic** » 24 Feb 2010, 16:29

If you don't find a satisfactory solution in Usine, perhaps try Big Clock by Pizmidi.
http://www.thepiz.org/dl/?p=vst

nay-seven · Unread post by **nay-seven** » 24 Feb 2010, 16:54

@guru:
if you need a clock

kara · Unread post by **kara** » 24 Feb 2010, 17:28

It looks as I don't find a solution, perhaps i'm not good enough at patching yet....

So I would be realy greatfull if someone finds a solution for my problem
"""
I want a counter that counts up every bar, but each time I stop or start the audio engine (with SPACE) it should restart from 1
"""

thank you

k

nay-seven · Unread post by **nay-seven** » 24 Feb 2010, 17:46

something like this..?

gurulogic · Unread post by **gurulogic** » 24 Feb 2010, 18:57

nay-seven wrote:@guru:
if you need a clock

aha!
I am still stuck on my old skool VST solutions daze...
I must always remember that Usine can do ANYTHING! (well, almost

)

kara · Unread post by **kara** » 24 Feb 2010, 19:06

Close but not exactly

As I see it, the counter is reset at each cycle start, it should reset only on the first cycle start

k

nay-seven · Unread post by **nay-seven** » 24 Feb 2010, 20:45

ok , with the help of senso , found a way :
put this in your master section :

then add a bus sending the 1 to the reset of the counter..et hop

kara · Unread post by **kara** » 25 Feb 2010, 09:15

This works perfect !
Big thanks to both of you.

k

Would be nice for the WIKI ?

nay-seven · Unread post by **nay-seven** » 25 Feb 2010, 10:12

cool!
yes , could be an example for this characteristic of the master insert .

Welcome to %s forums

Strugling with a bar counter

Login • Register