Can be considered as a control-fader but for filenames strings.
This module appears in sub-patches as inlet or outlet.
Filename value.
Filter used by the open dialog window for example:
Patch files (*.pat)*.pat
Workspace files (*.wkp)*.wkp
All files (*.*)*.*
Displayed caption of the object. Click to enter a new name.
Symbol of the numeric value. For example "Hz", "ms".
Resets all the values of the selected object.
It resets to the reset value value for controls and to their default values for panels.
Determines if parameters of this object are saved in the preset-panel.
Parameters of the this object can cross faded when you recall a preset in the grid.
Optional setting, does not appear on all objects.
When ON, this object will be reset to its default value when using the reset command of its patch.
Hint text displayed on mouse over.
When ON, the input has a built in flow-pass-if-changed on the input. So the module is affected only if the input value has changed.
Background color of the control.
transparent option must be OFF.
Blue background color example.
Determines if the background of the control is transparent or not.
Example, the first module is transparent.
Background color when the control is modified by a remote (MIDI,OSC,etc.).
Optional Filename of the background image.
Only PNG, JPEG and BMP formats are supported.
Use [ctrl+click] to reset.
Example on an panel-xy-pad.
Force the image file to adapt its displayed size to the size of the object.
See manipulate-bitmaps.
Background bitmap input.
Use [CTRL + Click] to reset the input.
Background bitmap output.
Displays or not the border of the control.
8 pixels border on an panel-xy-pad.
Sets the border width of the control in pixel.
8 pixels border on an panel-xy-pad.
Border color of the control.
a yellow border on an panel-xy-pad.
Border color when the control is OFF.
a black OFF border on a switch.
Border color when the control is ON.
a white ON border on a switch.
Thickness of rounded corners.
0 = no rounded corners.
Example on a panel-shape.
Enables or disables the drawing of a border when the control is selected with the mouse.
Displays or not the caption.
Example on a fader.
Caption alignment of the control, left, center or right.
Vertical alignment of the caption, center, top or bottom.
Example on knob: Center, top and bottom.
Example on switch.
Size multiplication factor applied to the caption font.
Example on switch.
Font name of the control caption.
Example with 3 different fonts on switch.
Color of the caption font.
Example on switch.
Italic style for caption font.
Example on switch.
Bold style for caption font.
Example on switch.
Underline style for the caption font.
Example on switch.
See using-drag-drop.
Enables the drag on this control.
Enables or disables the drag&drop possibilities on this control.
Name of the dropped file.
Clears the latest dropped file name.
Number of frames in the background bitmap. See create your own knobs and faders.
Determines if the frames used in the background bitmap are aligned vertically or horizontally. See create your own knobs and faders.
Determines if the control can be modified by the user. When OFF, the mouse interaction and modifications are disabled so the user can't change the value.
Sets or get the visibility of the control.
Global color of the control. Usine will choose the best contrasted colors according the global color.
When ON the global color of the control is not affected (is isolated) when the parent control global color changes.
Determines the Z-order of the control
Example with the first knob on top.
Opacity value of the control.
0 will give a totally transparent control so invisible.
Blur amount applied to the object.
Example of blur.
Be careful, the blur softness use shaders which are not supported by all graphic cards.
It can crash Usine.
Opens the web browser to display information's or help about the selected object, if it exists.
For more details about information/help creation, see create-help-file.
visible only in god mode, see setup-panel-tab-expert.
Current private id for this control.
If you experience difficulties in Polyphonic mode, try to recreate new id(s) with this button.
Each Patch shared on the local network uses its own ID (identification number). If you experience issues of Patches that don't send information to the good target, this button will rebuild all these id's.
Determines where the object is visible.
When the location is set to a container which doesn't exist in the patch, Usine try to find in parent patches, the first container available. If no container is available an error message is displayed.
When ON, will also be visible in the interface-builder-panel.
Gives the mouse state of the control:
In multi-touch environment, can be an array of [0..1] values.
Gives the mouse wheel speed and direction, -1,-2,-3,...=forward, 1,2,3,...=backward.
Enables or disable the mouse wheel action.
Sends a 1 value if the user has [dbl-clicked] on the control.
Determines if the mouse is active on the control.
Gives the mouse X position on the control in relative coordinates from 0=most-left to 1=most-right.
In multi-touch environment, can be an array of [0..1] values.
Gives the mouse Y position on the control in relative coordinates form 0=top to 1=bottom.
In multi-touch environment, can be an array of [0..1] values.
Pressure value on touch-screens.
The pressure value is not available on all touch screens.
Gesture information's.
In touch and multi-touch environment, returns an array of the fingers movements See multi-touch
When ON, the value of the control is reset automatically on mouse up.
When ON, move up-down to rotate a knob, left-right when OFF.
Sends a 1 value when the control is hovered with the mouse.
Sends 1 when the control is mouse overed.
Sends 1 when the control is selected.
When ON, the automation recording starts automatically when click on the control.
Deletes the automation curve.
Sends 1 value when the control is playing a recorded automation curve.
Clear all the remotes assignations.
Inverse the values received during the learn.
Quantization applied when state or value changes.
Determines when the remote assignations are active.
See binds-panel.
Clear the current bind assignation.
Set or get the bind name assignation.
Click on this button and move your MIDI controller to assign it.
Name of the device associated to the MIDI learn.
Use [Ctrl+Click] to delete the name association so the MIDI learn will react with all the connected devices.
MIDI channel used for the MIDI learn.
MIDI Control message number (ie. Control Change, Note, etc) used for MIDI learn.
MIDI message type used for the MIDI learn.
Choose between the 3 MIDI assignation modes in Usine.
The control react as a in the Mackie control protocol.
Only if you have motorized MIDI controllers connected. Force Usine to send MIDI messages to the connected remote devices and get a MIDI feedback.
Soft Take Over if a control is moved on screen and it no longer matches the hardware control, the control will not update until the hardware control matches the onscreen value.
For instance say you have a line fader turned all the way up on the hardware, then you move the onscreen line fader to the bottom. With soft-takeover ON, the onscreen fader will not react to the line fader until you move the line fader all the way down to match the on screen value. The control will then latch on and will be active again.
System exclusive chain used for MIDI learn.
Click on this button and press a key (or a key combination ie. [ALT+E]) on your keyboard to assign it.
Key used for the key learn. Can be a key combination like [ALT+E], etc.
Determines how the Key learn affect the control, absolute or toggle.
Key code value of the key learn.(ex: A=65)
Curve type used for the mapping, log or exp, power curve, linear.
Mapping curve coefficient.
Maximum range of the assignation.
Minimum range of the assignation.
Click on this button and use a control of your OSC device to assign it.
OSC message used for the OSC-learn.
Choose here between 2 modes, real OSC values received or force the values into the [0..1] range.
This option is utilized to choose which tag to use when receiving multiple values simultaneously like in an XY values.
Time code learn, used to switch off a switch control.
Time code learn, used to trig an action or to switch on a switch control.
Name(s) of sources VCA's. One control can be controlled by several VCA at the same time so the VCA values are multiplied together.
To enter several names use comma separated string like VCA1,VCA2,VCA3
.
See use-vca for more info.
Name(s) of the owner cluster(s). One control can be in many clusters at the same time, but be aware that you could have conflicts (different value sent at the same time).
To enter several names use comma separated string like CLUSTER1,CLUSTER2,CLUSTER3
.
See use-clusters for more info.
Universe number assigned for remote.
Channel number assigned for remote.
Top position of the control in pixels.
Left position of the control in pixels.
Height of the control in pixels.
Width of the control in pixels.
Horizontal position in % [0..1] relative to the parent panel.
Vertical position in % [0..1] relative to the parent panel.
Height in % [0..1] relative to the parent panel.
Width in % [0..1] relative to the parent panel.
Top position in pixels in the interface-builder-panel.
Left position in pixels in the interface-builder-panel.
Width in pixels in the interface-builder-panel.
Height in pixels in the interface-builder-panel.
Rotation angle of the control.
Rotates this control in vertical position.
Zoom scale of the control.
Determines is the control can be zoomed with the wheel mouse.
Determines if the control can be resized with the resize grip.
Determines if the control is minimized or not.
Determines if the control is movable on X axis.
Determines if the control is movable on Y axis.
When ON the control stays inside the parent on X axis.
When ON the control stays inside the parent on Y axis.
TpgControl_Button.floating content parent y
Determines if the control can be resized on its left hand.
Determines if the control can be resized on its right hand.
Determines if the control can be resized on its top hand.
Determines if the control can be resized on its bottom hand.
See physics-engine
Enables physics-engine in this panel.
The physics speed of the control in physics-engine.
When ON, the physics-engine starts with a random speed for each child controls.
When ON, all controls have the same masses in the physics-engine.
The position control is not affected by the physics-engine.
Friction factor in the physics-engine.
Energy conservation coefficient on collision.
Gravity factor on the X axis.
Gravity factor on the Y axis.
Position of the object when the physics engine is reset on X axis.
Position of the object when the physics engine is reset on Y axis.
Angular speed of the control in the physical engine.
Sends a 1 value when the control collides with another control or a border.
Gives information about the collide state in the physics-engine.
Speed vector value on the X axis in the physics-engine.
Speed vector value on the Y axis in the physics-engine.
Automatically reorganize positions of controls in the panel.
Left margin used in reorganization, in pixels.
Interspace between controls used in reorganization, in pixels.
Resizes panels automatically when child controls are moved or resized. Switch it OFF if you use floating panels inside.
Margin in pixel used for the auto resize option.
Adjust the panel width to a multiple of the default rack width.
In unlock mode, snap the control to a grid.
Grid size in pixels when snap to grid is ON.
Mode of the precision factor. Can be disabled or for touch screen only or always (touch screen and mouse).
Precision factor when the control is modified with a touch screen. Hi values for hi precision on touch screen.
Behavior of the control when it is modified with a touch screen.
When ON, the mouse wheel acts in circular mode.
Shows the value for this control.
Option ON and OFF on a fader.
Shows the symbol.
Displays the value and symbol only when selecting or interact with the mouse.
Example on a fader.
When ON, display the hint only when the mouse is down on the control.
When ON, the edition on the value is possible with a simple click, instead of a double click.
When the input of a fader is an array, displays the value as a list of array elements (ON) or only the first array value (OFF).
Option ON and OFF on a fader.
Value alignment, left, center or right.
Example on a knob.
Bold style for the value font.
Example knob.
Color of the value font.
Example with a Green and a Red value on a knob.
Size factor of the value font.
*Example with 2 different values on a knob.
Value horizontal alignment, center, top, bottom.
Value vertical alignment, center, top, bottom.
Example on knob (Center, top and bottom)
Show the order of a voice in a polyphonic sub-patch.
version 5.2.221206
Edit All Pages