math question

[seamus]

I have a knob on a synth that when engaged is .75 and when disengaged is .25

The trouble is i need to pass along the values of when .25 = 0 when .75 = 1

how do I patch this?

[seamus]

http://www.sensomusic.com/forums/upload ... roblem.JPG

here is a visual.
I cant pass along values from the synth to my usine switch because the values are .25 and .75 instead of 0 and 1 which the switch needs to be updated

[r.erorr]

you can use mapper (value) module and set your inputs and outputs as you want.

[r.erorr]

or maybe more simple: use A=B module and set B value 75.
This means 75 = 1, not 75 = 0

[seamus]

And the .25 for zero? I was having problems with the 0 and 1 messages not being able to be passed on properly.
I will see of I can successfully patch it and post a screenshot for the lone curious fellow who happens to see.

[iococoi]

how about the Auto Scale script? ...Data>Data Manipulation>Auto Scale[script]

~io

[caco]

You could also take the output of the knob, add 0.5 to it and then use the trunc module to round down to the integer.

0.25 + 0.5 = 0.75. Trunc will then output zero.

0.75 + 0.5 = 1.25. Trunc will then output 1.