MIDI

MIDI global settings.

rescan devices

Rescans and updates the list of available MIDI devices connected to the system.

Can be used for Hot plugged in MIDI devices.

reset devices

Resets all MIDI devices connected to the system (shutdown an reopen).

If a device fails to respond, this option is useful to reset the device in hopes of regaining functionality.

recreate MIDI devices

  • on Windows, this command recreate the MIDI devices manager to provide a full reset of all devices. More efficient than the rescan devices command above.
  • on MacOS it does a simple rescan devices as the command above.

Can be used for Hot plugged in MIDI devices.

inputs / outputs

Shows available and connected MIDI devices. It allows you to activate devices you want to use.

For example in the picture below, the Launchpad mini controller is enabled and ready to use as MIDI Input.

midi lan & bridge

Activates the built-in MIDI-to-LAN interface that allows MIDI communication between computers running Usine on the Local Network.

MIDI feedback to all devices

When ON, the MIDI feedback is sent to all motorized devices, even if they are not concerned by the MIDI learn.

Since HH3.0.133 the MIDI learn is associated with the name of the device. When this option is ON it turns Usine to old (prior HH3.0.133) MIDI feedback behavior.

send ALL NOTES OFF on stop sync

When activated, Usine sends the a MIDI All Note Off message when sync has stopped.

ignore active sensing messages

Some MIDI controllers send continuously active sensing messages. When ON, Usine filters them directly.

This way the trace panel and your MIDI devices are not polluted by this message.

MIDI show control Input

Various MIDI SHOW CONTROL settings for the reception of MSC information's.

MSC device ID

Current Usine's MSC device ID.

MSC group

Current Usine's MSC group.

MSC format

Current Usine's reception MSC format.

See also

version 5.2.221206

Edit All Pages